Used Thermal Spray Coating for sale (5,672)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Bwodpfxezu Rpis Andjw Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Bedewf Dpgjpfx Andeww Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Bodpey N Ubzefx Andjww Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Bedsxa Hx Repfx Andoww Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Bwedozvaz Dopfx Andsw Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Year of construction: 1998, condition: ready for operation (used), An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible. Bedpfx Ajzh Ng Hjndoww

Condition: new, Year of construction: 2024, RHS spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gearmotor (possibility of managing fixed-tilt-full rotation). - Siemens PLC - possibility of creating and managing washing recipes. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Thermal insulation of the entire system. Bwederywyajpfx Andew - Magnetic/electronic control of correct door closure. - Level sensor / protection for too low level. - Automatic water filling. - Vapor aspirator. Available in various configurations with: - 50-100 micron bag filter. - Drying with fan and electric heaters. - Oil separator - Emptying pump. Technical features: - Loading capacity: Single basket 670x480xh.400 mm or No. 2 450x300xh.200 mm. - Maximum allowable weight: 100 kg. - Tank volume: 400 Lt.

Condition: new, Year of construction: 2024, SM11 spray cleaning system Bedpfx Aerwmyhendoww Supplied as standard with: - Single washing tank. - Basket movement by gear motor. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Electronic control of correct lid closure. - Level sensor / protection for too low level. - Tank drain with ball valve for bath change. Available in various configurations with: - Whole system thermal insulation. - 50-100 micron bag filter. - Vapor aspirator. - Drying with fan and electric heating elements. - Drying with high-pressure blower and air blade. - Oil separator. - Automatic water filling. - Emptying pump. Technical characteristics: - Basket diameter: ø1100 mm. - Internal useful height: 700 mm. - Maximum allowable weight: 250 kg. - Tank volume: 260 Lt.

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Bodoun Sd Uopfx Andoww Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. Bwedpfsum Uflsx Andsw - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: used, WEISS TECHNIK Salt Spray Test Chamber / Corrosion Test Chamber SC 1000 Professional salt spray test chamber for corrosion, salt spray, and condensation tests For sale is a used salt spray test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for professional corrosion tests, salt spray tests, and condensation tests in laboratories, the automotive industry, research, and quality assurance. Equipped with a color touch panel, Ethernet interface, and a test chamber volume of approximately 950 liters. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of manufacture: 2015 Test chamber volume: approx. 950 liters Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Compressed air: 4–10 bar (max. 10 bar) Deionized water: 3–5 bar Control: Programmable color touch control Ethernet network interface RS232 interface Dimensions: External dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test chamber dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test chamber volume: approx. 950 liters Bwedpfx Anjzlgyrjdjw Weight: Tare weight (without brine): approx. 220 kg Equipment: 950-liter test chamber Color touch panel Ethernet interface RS232 interface Programmable control Salt spray testing Condensation testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Application areas: Corrosion testing Salt spray tests Condensation tests Material testing Coating testing Paint testing Automotive industry Quality assurance Testing laboratory Research and development Scope of supply: Weiss Technik SC 1000 Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Bjdpfx Anezg Er Asdoww Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / corrosion testing cabinet Weiss SC/KWT 450 salt spray chamber Testing system for salt spray, corrosion and coating tests For sale is a used salt spray chamber from Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, as well as industrial testing and development applications. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Device type: Salt spray chamber / corrosion testing cabinet Size: 450 l Test chamber volume: approx. 360 l Brine reservoir: approx. 180 l Test chamber dimensions: approx. 850 × 570 × 740 mm (W × D × H) External dimensions: approx. 1,930 × 800 × 920 mm (W × D × H) Weight (empty): approx. 140 kg Max. test part weight: 100 kg Max. load per rod: 8 kg Brine consumption: approx. 0.5–1 l/h Compressed air consumption: approx. 1.5 Nm³/h Demineralized water consumption: approx. 0.4 l/h Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust connection Brine drain Documentation / operating documents available Accessories according to the pictures Areas of application: Corrosion testing Salt spray testing Coating testing Material testing Quality assurance Automotive industry Research and development Scope of delivery: Bedpfozzzpgox Andsww 1x Weiss SC/KWT 450 salt spray chamber Sample holders according to the pictures Original operating/service documents Accessories according to the pictures Condition: Used Optical condition according to the pictures Normal signs of wear and tear due to age and use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Liebisch Constamatic Type: S1000 M-TR Corrosion testing system / Salt spray test chamber Liebisch Constamatic S1000M-TR (4BVL) Professional corrosion testing system for salt spray, condensation, and cyclic climate tests For sale is a used corrosion testing system from the manufacturer Liebisch Labortechnik. The system was developed for corrosion tests under defined environmental conditions and is suitable for quality control, research, development, and material and coating tests. Due to the robust chest design and large test chamber volume, larger components can also be tested. Technical data Manufacturer: Liebisch Labortechnik Type: Constamatic S1000M-TR (4BVL) Device type: Corrosion testing system / Salt spray test chamber Design: Chest design Test chamber volume: 1000 liters Test chamber dimensions (W x D x H): 1435 x 780 x 600 mm External dimensions (W x D x H): 2600 x 1120 x 1255 mm Temperature range, test chamber: Ambient temperature to 50 °C Temperature range, humidifier: Ambient temperature to 70 °C Reservoir for salt solution: 100 liters Power connection: 230 V AC Frequency: 50–60 Hz Current consumption: 12 A Power consumption: approx. 2700 W Suitable for tests according to DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621-415 ASTM B368 MIL STD 202 F-101D VW PV 1210 as well as other corrosion and cyclic climate tests Equipment Automatic control Salt spray test Condensation test Combined corrosion and cyclic climate tests Temperature control Humidification system Test rack with sample holders Pressure gauge Large reservoir for test solution Gas spring dampers for comfortable lid opening Bsdpfjzcdyxox Andeww Areas of application Automotive industry Coating and paint testing Material testing Quality assurance Research and development Laboratory and testing technology Weight: 450 kg Condition Used Normal signs of wear and tear Interior with discoloration due to corrosion from previous testing operations Optical condition as shown in the pictures Scope of supply as shown in the pictures Scope of supply 1x Liebisch Constamatic S1000M-TR corrosion testing system Test rack and integrated holders Other accessories as shown in the pictures Inspection and testing on-site are possible by arrangement and are highly recommended. Loading can be organized by arrangement. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Bwodpfx Ajzd Axbendjw Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Bjdpezd Az Aofx Andoww The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Bsdpfx Ansyg H Erjdoww Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 250 kg, temperature: 220 °C, heating capacity: 60 kW (81.58 HP), workpiece length (max.): 4,000 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Professional powder coating system – Compact complete solution meeting industry standards High-performance and flexible: This complete system delivers excellent coating results for workpieces up to 4.0m in length. Equipped with high-quality Wagner or Gema technology, an indirectly heated gas/electric curing oven, and an integrated conveying system. Each component can be individually adapted to your production requirements and space constraints! Bwjdjffwfxepfx Andjw For sale is a professional powder coating complete system from the trading agency Klaus Benecke, designed for high manufacturing quality and smooth material flow. The system combines a large-volume curing oven with energy-saving rock wool insulation and indirect gas heating for even heat distribution up to 220 °C. A mobile spray booth with a powerful filter extraction system and integrated Wagner/Gema application technology ensures precise coating. The manual rail system with transverse movement efficiently connects the workstations and is designed for high load capacities. A central control system with PT 100 sensors ensures precise temperature control of the entire system. Quick overview (technical details): - Curing oven: 4,000 x 1,500 x 2,200 [mm], max. 220 °C, 150 mm rock wool insulation, indirect gas burner (Riello BS2, 60 kW). - Spray booth: Mobile (2,000 x 2,100 x 2,200 [mm], 6,000 m³/h fan (3.0 kW), 4 cartridge + absolute filters, 60 L powder container. - Coating system: Wagner/Gema manual system (Corona/Tribo, max. 450 g/min). - Conveying technology: Rail system with transverse movement, 72 m rail, 1 trolley, 6 traverses (load capacity: 250 kg/traverse, 750 kg/trolley). - Control system: Control cabinet for oven and booth with PT 100 sensors. Individual configuration: Do you have specific requirements regarding component sizes or throughput? We will plan and configure your powder coating system precisely according to your specifications. Contact us now to discuss your project details.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns Bsdpfx Anszvcknsdjww • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Bwsdpfx Asflk Awendow 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. Bwodpfx Aewzmcbendow COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Density kg / m3: 96 Bsdpfxsh Rawue Andeww Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Bjdpfjfzb Rcjx Andsww Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Bwjdofzccnepfx Andow 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. Bwjdpfxowzl Hxo Andjw * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.