Used Thermoplastic Granules for sale (674)

Condition: used, Year of construction: 2000, Granulator / Knife Mill Manufacturer: Tria (Italy) Model: 80/45 Main motor: 55 kW Rotor length: 800 mm Rotor diameter: 490 mm + Blower + Big-bag station with cyclone The machine was dismantled from the customer's facility and is stored in our warehouse. Bwjdpfx Aexg Tgzobzsw

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Bwsdpfxel Sm N To Abzjw Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: excellent (used), Year of construction: 2002, Krauss Maffei Injection Moulding Machine KM 420-2700 C2 Year of manufacture: 2002 Machine Description The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise unit with a high clamping force of 4200 kN, designed for processing thermoplastics. Equipped with a reliable hydraulic system and a precision control system, it ensures stable and repeatable operation in demanding production environments. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 4200 Max. mould opening force kN 250 Moving platen travel force – opening kN 124 Moving platen travel force – closing kN 102 Platen dimensions (H × W) mm 1270 × 1200 Tie bar spacing (H × W) mm 800 × 800 Bwedpfx Asxq Akkebzow Mould opening stroke mm 1020 Minimum mould height mm 380 Maximum daylight mm 1400 Ejector force (forward / backward) kN 95 / 48 Maximum mould weight kg 6700 Injection Unit Parameter Unit Value Screw diameter mm 70 L/D ratio - 20 Injection pressure bar 1829 Shot volume cm³ 1097 Shot weight (PS) g 998 Injection speed cm³/s 513 Max. plasticising rate g/s 108 Nozzle contact force kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating power kW 36 Number of heating zones – barrel - 7 Oil tank capacity l 1075 Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Condition: like new (used), Year of construction: 2019, machine/vehicle number: 103641, power: 9.5 kW (12.92 HP), Complete Chocolate Enrobing Line – GAMI, Italy MELTING TANK Stainless steel tank, 150 kg capacity, with heating and mixing system for melting and maintaining chocolate or compounds at set temperature. Equipped with auger for product transfer, adjustable mixer speed, and electronic temperature control. • Capacity: 150 kg • Power: 3.9 kW • Dimensions: 900 × 1150 × 1500 mm TEMPERING MACHINE Automatic continuous tempering machine with integrated dosing, enrobing conveyor, and vibratory feeder. Fully electronic temperature regulation, programmable functions for tempering, melting, vibrating table, and dosing control. • Bowl capacity: 25 kg • Hourly output: up to 90 kg/h • Power: 3.2 kW • Dimensions: 570 × 740 × 1560 mm COOLING TUNNEL Modular stainless steel tunnel with closed-loop air-cooling system for chocolate coating solidification. • Useful length: 10 000 mm • Belt width: 300 mm • Power: 2.1 kW • Voltage: 400 V 3+N 50/60 Hz GRANULE / DECORATION DISPENSER Adjustable-speed wire-mesh conveyor for dosing inclusions (grains, nuts, etc.) onto enrobed products. • Hopper volume: 11 dm³ • Power: 0.18 kW • Dimensions: 600 × 700 × 1460 mm Bodpfxjqbtcao Abzoww FEATURES • Fully stainless-steel construction, CE-compliant • Independent electronic controls for each module • Emergency stop and interlock safety devices on all units • Closed-circuit air-cooling system (no external chiller required) • Compact modular design – easy to install and maintain TECHNICAL HIGHLIGHTS Total connected power ≈ 9.5 kW Total length ≈ 12 m Manufactured by GAMI srl, Italy – renowned for professional chocolate processing equipment.

Condition: good (used), CPM 3000 110kW granulator with conditioner and dispenser Bsdpfxewcdnws Abzoww

Condition: used, Used mild steel Cumberland blade mill type 56T Granulator Hp 10. Unit has (3) rotor blades. Milling chamber measures 200mm diameter x 1450mm long. Driven by 7.5kW/10HP 380/660 Volt 975 rpm motor. Bwjdpexputzsfx Abzow

Year of construction: 2000, condition: used, Granulator / Knife Mill Manufacturer: Tria (Italy) Model: 80/45 Main motor: 55 kW Bsdpfxoxg Tguo Abzsww Rotor length: 800 mm Rotor diameter: 490 mm + Blower + Big-bag station with cyclone The machine was dismantled from the customer's facility and is stored in our warehouse.

Condition: good (used), Container, granulate container, storage tank, lye tank Bsdpjxak Ntsfx Abzjww -Container: stainless steel container, lye container with lid -Capacity: approx. 1660 Ltr -Dimensions: 3770/940/H1540 mm -Weight: 603 kg

Condition: excellent (used), Year of construction: 2007, Injection Moulding Machine Krauss Maffei KM 110-750 CX Year of manufacture: 2007 Machine Description The Krauss Maffei KM 110-750 CX injection moulding machine is a modern unit with a fully hydraulic clamping system. It is equipped with the MC5 control system featuring a color monitor, integrated control panel, and three USB ports. The machine is fitted with a complete plasticising unit designed for processing thermoplastics, with an abrasion-resistant version. The screw (diameter 45 mm) is equipped with a non-return valve and open nozzle. Technical Data Bjdoxqzz Ujpfx Abzsww Clamping Unit Parameter Unit Value Clamping force kN 1100 Mould opening force kN 70.0 Movable platen stroke force – opening kN 35.4 Movable platen stroke force – closing kN 31.4 Platen dimensions (h × v) mm 745 × 770 Tie bar spacing (h × v) mm 470 × 470 Mould opening stroke mm 600 Mould height (min.) mm 300 Total daylight (max.) mm 900 Ejector stroke mm 150 Ejector force kN 22.6 / 9.9 Injection Unit Parameter Unit Value Screw diameter mm 45 Injection pressure bar 2336 Shot volume cm³ 318 Shot weight (PS) g 289 Screw speed (standard / option) rpm 265 / 355 Electrical and Hydraulic Equipment Parameter Unit Value Nominal pump motor power kW 22 Installed heater capacity kW 15.62 Number of cylinder heating zones - 5 Dry cycle time (Euromap) cycles/h 2000 Oil tank capacity l 489 Dimensions and Weight Parameter Unit Value Net weight with control cabinet t 6.2 Machine dimensions (L × W × H) m 4.9 × 1.6 × 2.1

Condition: excellent (used), Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for granulating soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Bwsdjw Iu T Topfx Abzjw

Condition: used, Year of construction: 2025, Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 7500 m3/h INLET DIAMETER 250 mm Bjdpfxsxn I Szs Abzoww OUTLET DIAMETER 250 mm ROTATIONS 2850 obr/min DIMENSIONS 670 x 600 x 600 mm MOTOR POWER/VOLTAGE 4,0 kW/400 V WEIGHT 53 kg Warning! The machine is a return item, no original packaging, slightly bent base, slight scratches.

Condition: used, Uniloy UR110 16 Head Reciprocating Screw Blow Moulding Machines (2x 2012) With Ancillary Equipment Each with: Uniloy Milacron RTM 4 trimmer (2012) Uniloy Milacron leakage control 5x Moretto hopper loaders 2x Moretto FC400PB filter units Shared between Uniloy blow moulders 3x Beccaria TV 2500 granule mixer dryer, 2,500L capacity Maguire WSB-940T gravimetric blender Bsdpfjxn N Abex Abzjww Moretto TLC 05S3 manifold Moretto VTS1120W60 side channel suction unit Tria BM90-42 granulator with acoustic enclosure (2014) Demag pillar jib crane

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Main motor: 18.5 kW Bwedpoxgfriofx Abzjw Automatic waste feeding

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model Bodewugczopfx Abzjww 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 2013, operating hours: 16,073 h, functionality: fully functional, machine/vehicle number: T/41521, year of last overhaul: 2025, OTT Tornado TOP + LIGMATECH EKOMAT ZHR 01/R/065 Return Device Year: 2013 Bwedexpphaspfx Abzow The machine is equipped with: RMV-40 – Automatic edge band magazine, 0.4-3mm edge thickness, end trimming shears with roller and optical sensor for reducing edge length on the workpiece (saves edging material). Automatic edge feed hopper with optical detection for fixed-length edging pieces. Combi Melt – Gluing zone, supports EVA and PUR hot-melt adhesives, as well as all standard cleaning granulates. Machine Control: Operated via a 15-inch color touchscreen monitor, unlimited number of work programs can be sequentially saved, all preselection of processing aggregates as well as working parameters for the CombiMelt gluing system allow for full automation and maximum operator comfort. Electronic control – reference points with high accuracy +/- 1 mm. Via Beckhoff industrial PC, certain tool aggregates can be adjusted during machine operation/loading. Working Aggregates: -F- Pre-milling unit: For pre-milling workpieces before adhesive application. 2 HF motors, 1.5 kW, forward and reverse, automatic control. -Kc- Double end-trimming unit: With 2 high-frequency motors, 0.3 kW, 12,000 rpm. -Bfc– Rough milling cutter Heavy-duty cutter for milling solid edges from the surface and profiling before rounding radii. -Hft- Fine milling unit - Radius With 2 high-frequency motors, 0.3 kW, 12,000 rpm, double-sided, automatically adjustable. -AKF- Automated copying milling unit as a universal milling aggregate: With two independent spindles for top and/or bottom longitudinal as well as corner processing. Automatically switches from beveling for thin edge up to 1 mm to radii processing. -ZKc- Scraper aggregate R2 Double-sided processing, automatic control, for removing rounded areas. FZK: Flat scraper for removing excess edge and glue residues. -GE- Second guide operation for workpiece leading (can be folded away or towards the machine as needed). -GS- Application of glide agent to the edge. -RS Set – 4-way chemical spraying and cleaning unit. -ZKc- Scraper aggregate R1. -WE: Angular stop – ensures precise infeed of the workpiece to the edgebander. Trouble-free machine in excellent condition, regularly serviced by OTT (Asamer s.r.o.) The machine is currently operating in production and can be tested - we are processing with PUR adhesive. Available for collection end of 2025.

Condition: used, This listing is for a Hulme Martin 10/3319 Heat Sealer The unit is in full working condition and is ready for immediate release. This is an mpulse heat sealers (for like-for-like thermoplastic film welding), constant heat sealers (for laminated or foil materials), vacuum sealers and other ancillary equipment. Bwedpfxoxuiv Ij Abzsw Designed for durability (20+ years or more in service according to their marketing) and easy servicing via plug-in heater bars and affordable consumables.

Condition: new, Year of construction: 2025, functionality: fully functional, General Description: Specifically designed for grinding soft to medium-hard plastics. Fixed discharge pipe on the grinding bin. Bwodpfexgn Ugsx Abzsw Outlet pipe with adjustable airflow and slanted cut. Automatic self-tensioning belt drive system (maintenance-free). Technical Specifications: Sound-insulated stainless steel hopper. Hopper prepared for magnet installation. Grinding chamber: 247 x 284 mm. Number of blades: 3 rotating – 2 fixed. Rotor diameter: 180 mm. Rotor design: Open. Rotor speed: 200 rpm / 50 Hz. Re-sharpenable blades. Screen hole size: 5 mm. Drive motor: 3 kW. Large flywheel providing additional cutting inertia for thick-walled parts. Throughput capacity: 35 kg/h (depending on material, part geometry, grinder size, etc.). Stainless steel collection bin (13 liters), suitable for manual or vacuum discharge. Notes: Stock Availability – granulators equipped with additional options: with magnet on hopper with antistatic capacitive sensor with discharge pipe

Condition: excellent (used), Vomm 90kW granulator in very good condition Bodpfx Abexmu E Eozeww

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Automatic waste feeding Bsdpfoxgfqfex Abzjww

Condition: good (used), Year of construction: 1994, System for filling spacer frames with molecular granulate (diagonal filling). Bodpfxexq Rtys Abzeww Height: 3450 mm. Width: 1300 mm. Depth: 1400 mm. Weight: 520 kg. Condition: good, second-hand.

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, Bwedpfx Aogwct Debzew • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: excellent (used), Suitable for filling a massive variety of products, for example; fertilizer pellets, toner powder, cat litter, granulated or powdered pet food, whole and ground coffee, sugar, plant food, powdered foods, plastic granules, ground spices, flaked spices, fine cut tobacco, whole and ground pepper, detergent powder, flour, infant formula, cake mix, matcha powder, cosmetic powder, curry powder, seeds, salt products, rice products, lentils, breadcrumbs etc. Bjdpfx Abjw H Adrjzoww

Condition: excellent (used), Granulator PD 1 with 22 kW power, intended for processing sawdust into wood pellets. Used equipment. Capacity: 300–350 kg/h. The granulator is in very good condition. Bwodexmu Efepfx Abzew

Condition: good (used), Year of construction: 2007, System for filling spacer frames with molecular granulate (diagonal filling). Height: 3450 mm. Width: 1300 mm. Depth: 1400 mm. Weight: 430 kg. Bjdpfx Aboxq Rq Sezjww Condition: good, second-hand.

Condition: used, CPM 7930 granulator with 762mm die for sawdust. Motor 200 or 250kW, 132kW also possible. Capacity 2-3 t/h. Bsdpfx Abjxmu Dnozeww