Used Tilting Device for sale (15,361)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Dwjdpfx Adewc Nvgedof 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples Dwsdpsxmv H Refx Addef - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: good (used), continuous welding machine, film welding machine Dsdpfxsvyq Dus Addjwf -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: good (used), Internal article no.: 24089 Hot melt adhesive system Consisting of: 2x hot melt adhesive tank units (Dynamelt 505 / BJ:04) Dedpofkgycefx Addswf 15 pcs. Material hoses Various hot melt adhesive application heads (Dynatec BF) Operating instructions Technical data, see pictures

Year of construction: 2023, condition: as good as new (ex-display), The mobile field balancing machine from the experts The statistics are indisputable: Over half of all faults and failures of machines and systems can be attributed directly or indirectly to unbalances in rotors. The SmaRT helps you to identify an unbalance simply and accurately, and to correct it with the minimum effort. With the SmaRT, rotors of almost any size and weight can be balanced quickly, costeffectively and accurately in the installed condition, and therefore without having to dismantle the machine. The SmaRT advantages: Dwodemt Atdjpfx Addjf • Easy operation with the aid of navigation and function buttons, • Large illuminated colour display, • Standardised vibration measurement, • Assessment setup to DIN ISO 10816-3, • Simple transfer and documentation of measurement results.

Condition: new, Year of construction: 2022, Suction nozzle diameter: 200 mm Nominal flow rate: 2800 m³/h Chip bag capacity: 2 x 120 l Filter cleaning: manual Dwedov R U H Ujpfx Addof Motor power: 2.2 kW Dimensions: 1500 x 500 x 2100 mm (L x W x H) Weight: 53 kg

Condition: excellent (used), Instron Instron 2663-822 Standard Video Extensometer (SVE) Non-contact strain measurement system for materials testing machines Description: The Instron 2663-822 Standard Video Extensometer (SVE) is a non-contact optical measurement system for precise detection of strain during tensile, compression, and flexural testing. Using contactless measurement via digital image processing, markers on the specimen surface are tracked—completely without mechanical influence on the test results. Ideal for applications where traditional contact extensometers (e.g., with blades) are unsuitable, such as with thin, sensitive, or elastic materials. The SVE is compatible with Instron materials testing machines and can be integrated into the Bluehill software (depending on system version). Special features: - Contactless strain measurement – no impact on the specimen - High resolution and measurement accuracy - Ideal for retrofitting older Instron systems - Low-maintenance and robust for laboratory use Technical specifications: Feature / Specification Measurement principle: Optical, contactless strain measurement Fields of view (FOV): 50 mm / 100 mm / 200 mm / 350 mm / 500 mm Resolution: - 50 mm FOV: 3 µm - 100 mm FOV: 4 µm - 200 mm FOV: 5 µm - 350 mm FOV: 25 µm - 500 mm FOV: 50 µm Measurement accuracy: - 50 mm FOV: ±5 µm or ±0.5% - 100 mm FOV: ±7.5 µm or ±0.5% - 200 mm FOV: ±10 µm or ±0.5% - 350 mm FOV: ±50 µm or ±1% - 500 mm FOV: ±100 µm or ±1% Data rate: 50 Hz Recommended markers: Dots approx. Ø 2 mm (at 50 mm FOV) / Lines approx. 1 mm wide Gauge length: Depending on the field of view, e.g., minimum 5 mm with 50 mm FOV Application range: Tensile, compression, and flexural tests under ambient or temperature-controlled conditions Power supply / interface: Via Instron system controller (compatible controller required) Reliable & durable: Proven Instron model 2663-822 Important note: “The table shown in the photos is not included in the sale.” Djdpfxoxvxwko Addewf Condition: used Scope of delivery: (See picture) (Specifications, subject to change and error!) We are happy to answer any further questions by phone.

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, machine/vehicle number: LP20250324YKH, laser hours: 150 h, laser type: fiber laser, laser source manufacturer: Dato, laser source model: Cw 1500/Pulse 300w 15mJ, For sale: State-of-the-art, barely used 2-in-1 laser system, ideal for precision cleaning and welding. This turnkey package is immediately ready for use. Price: €32,600 (negotiable) NET IMPORTANT NOTICE: This is a private sale with no VAT (value-added tax) shown or deductible. 1. Core Details of the Laser Units: • Brand/Manufacturer: Shandong Dato Machinery Co., Ltd • Year of Purchase: 2025 (latest, as-new models!) • Operating Hours: Very minimal use! - Pulse laser (LC-300W): approx. 300 hours - CW laser (LC-1500W): approx. 150 hours 2. Laser Specifications: • Pulse laser (cleaning/ablation): 300 Watt power, 15 mJ pulse energy. Includes protective lenses and special distance stand for the pistol head. • CW laser (welding/high-speed cleaning): 1500 Watt power. Includes protective lenses. 3. Unique Added Value (Software & Parameters): • Includes over 40 pre-set, optimized parameters for immediate and efficient cleaning of a wide variety of materials. This extensive parameter library saves you significant setup and testing time. • The results and operation of these parameters can be viewed in our videos on TikTok, Facebook, and Instagram: Infinity Laser Clean. 4. Complete Accessories and Safety Package: • Peripheral Equipment: Industrial extraction unit Fume Extractor XL-500 (700 m³/h capacity) and Vevor 50L compressor (oil-free). • Safety: 4x laser safety curtains (class 4), 8x safety goggles (LaserPair), 1x 3M respirator mask. • Consumables: Includes 40 replacement filters and numerous spare protective lenses. • Logistics: Robust loading ramps included. 5. Certificates, Warranty & Support: • Warranty: Manufacturer’s warranty valid until 2027. • Documentation: All CE certificates and technical documentation included. • Support: Buyer will be added to an existing WhatsApp/Telegram support group providing technical assistance and parameter optimization. Reason for Sale: Business closure and strategic realignment into the construction industry. Condition: AS NEW, regularly maintained and immediately operational. Dwsdpfsxz R I Eex Addof Location & Viewing: Frankfurt am Main. Viewing and test runs available by appointment for serious buyers. Delivery possible for an additional charge upon receipt of full payment. Serious inquiries only, please.

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 Dsdeu Nuycspfx Addewf very good condition, very little used

Condition: used, Sharpening device for block band saws MA50, in very good condition, with frequency converter (FU). Dwsdpfx Adswzzfwjdef Price changes, errors, and typographical mistakes reserved.

Condition: excellent (used), Felder F 700 M Shaper (Spindle Moulder) Electric spindle height adjustment and manual angle adjustment from 0 to +45 degrees Interchangeable 30 mm spindle Long tables: 215 cm 4 spindle speeds Dwjdpfxsxyfrpo Addjf 5.5 kW motor Spindle lock Brake Very good condition, machine fully checked and ready for operation.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm / 2 x 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 110 l Filter cleaning: manual Motor power: 1.5 kW Djdpfx Asv N Tydsddewf Machine height: 1000 x 500 x 2100 mm (L x W x H) Weight: 39 kg

Condition: excellent (used), Trumpf Type: TruPulse 44 Trumpf laser device with laser light cable and KLH cooler Laser device TruPulse 44 Electrical power at nominal laser power on the workpiece 2.0 kW Power 2.0 kVA Current at 230 V 9.0 A Consumption data Maximum power consumption (e.g. service case) Electrical power at nominal laser power on the workpiece 2.5 kW Power 2.5 kVA Current at 230 V 11.0 A Network design! Electrical connection values Mains 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) at nominal power (total power factor) 0.88 Insulation resistance 400 kOhm Pre-fuse 16 A Laser device dimensions Width 485 mm Depth 800 mm Height 700 Laser device weight 1.5 kN (150 kg) distributed over 4 castors Cooler: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant R134 a / GWP 1430 Tank 1.80 kg Power supply 3 x 400 V Frequency 50 Hz Rated current 4.5 A Connected load 1.8 kW Dimensions Length 650 mm Depth 650 mm Height 1100 mm Weight 190 kg Weight: 340 kg Scope of delivery: (See picture) Djdpov Hnz Dsfx Addswf (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 1979, Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement. Dodpsxzikrefx Addowf

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm max. table load 700 kg spindle taper ISO BT-40 spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m Dwodpfjxvdtwjx Addof - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor

Condition: like new (used), Year of construction: 2016, operating hours: 930 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 - 22 ID: 25050.8953 Category: Demo Forks: 1150 x 560 mm Capacity: 2000 kg Year: 2016 Hours: 930 hours Battery: 24 V / 230 Ah - NEW - Year 2025 Options: Dwsdpfoxz Udkox Addjf Special build! With hydraulically tilting forks! For example, for emptying IBCs *EX* Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 - Dust) Gas group = IIIB Temperature class = T 135°C

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Dwjdpjxg Hrkjfx Addsf Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), Year of construction: 1993, Offered is a Schenk/Trebel material tensile testing machine with retrofitted testing software from Doli year 1993, test material: reinforcing steel, max. tensile force 200kN, clamping tool as well as extensometer from Mess- und Feinwerkzeug GmbH MFL 300/500 with sensor and base. Viewing possible by arrangement. Dwsdpfx Aoxzikleddef

Condition: like new (used), Year of construction: 2016, operating hours: 879 h, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 - 22 ID: 25050.8957 Category: Demo Capacity: 2000 kg Year: 2016 Operating hours: 879 hours Battery: 24 V / 230 Ah - NEW - Year 2025 Options: Special construction! With hydraulically tiltable forks! For example, ideal for emptying IBC containers *EX* Proplan! System = ATEX 14 Proplan 3002 X Type = Cat. 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat. 3D (approved for ZONE 22 – Dust) Dodpfoxz Uddsx Addewf Gas group = IIIB Temperature class = T 135°C

Condition: ready for operation (used), Year of construction: 1984, Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment. Dwjdpfxjxzik Ej Addsf

Condition: like new (used), Year of construction: 2018, operating hours: 714 h, load capacity: 1,200 kg, lifting height: 2,950 mm, fuel type: electric, mast type: duplex, construction height: 1,940 mm, Manufacturer + Model: LINDE L 12 ac (1170) Mast: 2W2950 ID: 25081.2188 Cat.: Demo Mast: 2W2950 Lowered height: 1940 mm Lifting height: 2950 mm Capacity: 1200 kg Year: 2018 Hours: 714 hours Capacity: 24 V / 440 Ah - GEL Options: VERY unique CONTRA stacker!!! Dwodpfx Adoxz Ubpedof Equipped with: - Mast with tilt function - Freely adjustable forklift forks - Suitable for all types of pallets - Power steering!

Condition: ready for operation (used), Year of construction: 1963, A LOS material tensile testing machine is offered. Test material reinforcing steel, max. tensile force approx. 120kN, last calibration 2023, inspection possible by arrangement. Djdpfx Aexzikxjddewf

Condition: like new (used), Year of construction: 2016, operating hours: 708 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model:LINDE T 20 * EX * Proplan 3GD /  Zone 2 & 22  ID:25070.8428 Cat.:Demo Forks:1150 x 560 mm Capacity:2000 kg Year:2016 Hours:708 hours Capacity:24 v / 230 ah - NEW - Bj 06/2025 Options:Special construction !!With hydraulic tilting forks !!!For e.g. emptying IBC* EX * Proplan !!!!! System = ATEX 14 Proplan 3002 X Type = Cat 3G (allowed in ZONE 2) Gas group = IIB Temp class = T4 Type = Cat 3D (allowed in ZONE 22 - Dust) Dsdpfx Ajxz Ualjddswf Gas group = IIIB Temp class = T 135*C

Condition: like new (used), Year of construction: 2016, operating hours: 1,176 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model:LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID:25070.8807 Cat.:Demo Forks:1150 x 560 mm Capacity:2000 kg Year:2016 Hours:1176 hours Capacity:24 v / 230 ah - NEW - Bj 06/2023 Options:Special construction !!With hydraulic tilting forks !!!For e.g. emptying IBC* EX * Proplan !!!!! System = ATEX 14 Proplan 3002 X Type = Cat 3G (allowed in ZONE 2) Dwodpoxz Uafefx Addof Gas group = IIB Temp class = T4 Type = Cat 3D (allowed in ZONE 22 - Dust) Gas group = IIIB Temp class = T 135*C

Condition: like new (used), Year of construction: 2017, operating hours: 432 h, load capacity: 1,200 kg, fuel type: electric, mast type: duplex, construction height: 2,700 mm, Manufacturer + model:TOYOTA SPE 120 XR * Reach - Mast * Mast:2F3700 ID:25021.5733 Cat.:Demo Mast:2F3700 Lowered height:2400 mm Lifting height:3700 mm Capacity:1200 kg Cabin width:900 mm Year:2017 Hours:432 hours Capacity:24 v / 500 ah Options:VERY unique CONTRA stacker !! Equipped with; Djdpfoxz T Rcsx Addjwf - Foldable ride-on platform & brackets - Height-adjustable DRAWBAR - FFL mast = Full Free lift - Mast tilt - Pantograph - with CANTILEVER adjustable forklift forks - Suitable for all types of pallets POWERSTEERING