Used Toolroom Milling Machine for sale (64,564)

Condition: used, Year of construction: 2004, gebraucht 2004 4540 ca. 2 Wochen ab Auftragse Österreich 19900 € 1 63 - 3150 (18) U/min 700 x 500 x 500 mm 900 x 500 mm 6.6 kW 2150 mm 2220 mm 2120 mm 2550 kg 500 kg 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 Kwsdowirmnepfx Adwet hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Application Types Kwodpfox D S Ekox Adwst Milling

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Kwsdpfxow I Uine Adwet Availability: by arrangement Location: Flörsheim

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Kjdpfxewwq Hco Adwjwt Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Kwodsx Ifdkepfx Adwst Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Kjdpfxsw Au H Rj Adwewt Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake Kwodpfx Adexy Ntqjwet - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Kwsdjvy Dugjpfx Adwst Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Kjdewywciepfx Adwswt Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm Kwsdpfx Aow Rl S Ssdwst A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Year of construction: 2018, functionality: fully functional, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ±110° C-axis: ±360° Control unit: Heidenhain TNC 640 with HR 520 handwheel Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with transverse T-slots at 250 mm intervals Max load: 1,000 kg evenly distributed across the entire surface 2-axis milling head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool release: pneumatic Blow air: external Linear axis drives Feed rate X and Y axes: up to 60 m/min Feed rate Z axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Colour Enclosure, gantry, control cabinet: light grey Kwsdpfoxm Tv Asx Adwot Z-carriage and milling head: blue Additional equipment - 15-position tool changer - Oriented milling spindle (e.g. for thread cutting) - Direct path measuring system on all 5 axes - Double-sided enclosure - Heidenhain TT140 (optional, at extra cost) - Heidenhain TS260 (optional, at extra cost) - 3D machine model (optional, at extra cost) Machine condition Fully functional, immediately available, still under power until November 2025

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Kwodpfx Adjxlzg Hewet Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Kedpfxex Iuguo Adwswt Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Initial commissioning: 2005 Overhauled: 2022 Control system: SIEMENS SINUMERIK 840D PL Working area X-axis: 3,000 mm Y-axis: 2,500 mm Z-axis: 1,250 mm A-axis: +/- 100° C-axis: +/- 360° Hours Total machine hours: 110,000 h Total spindle hours: 60,000 h Current spindle hours: 1,900 h (new, February 2024) Clamping table Length x width: 3,000 x 2,500 mm T-slots: 18 H12 T-slot spacing: 250 mm Table load capacity: 5,000 kg/m² Installation: above floor Milling head VH6 Spindle power: 41 kW Spindle speed: max. 10,000 rpm Torque: approx. 200 Nm Tool holder: HSK 100A Axis clamping A & C: 3,000 Nm Drives linear axes Drive technology: linear motor Feed rate X/Y/Z-axis: 40–60 m/min Axis acceleration X/Y/Z: 3–5 m/s² Electrical specifications Voltage: 400 V Frequency: 50 Hz Dimensions & weight Machine space requirement: approx. 7,300 x 6,500 x 5,600 mm Total weight: 60 t Additional equipment - 1x chip conveyor, left - Video camera system for work area monitoring - 40 bar ICS coolant supply with belt filter system - 11 bar external coolant supply, face end - 30-position tool changer, expandable by 20 additional positions - Renishaw RMP60 / Renishaw touch probe Kodpfsx Npmrox Adwewt - BLUM tool measurement and tool breakage control

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Kedpfx Adexl R Hvjwjwt Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: new, The UWF 6, a leading model from the Conventional Vertical Milling Machines category and part of the Universal Milling Machines group, exemplifies KNUTH's commitment to precision engineering. This robust universal milling machine boasts a rigid HT-200 cast-iron construction, providing a solid base for precision work. It features a large milling table with a 1,300 mm travel on the X-axis, allowing for efficient handling of substantial workpieces. The machine is equipped with a universal cutter head that swivels on two planes and a horizontal spindle with its own drive, enhancing versatility. Its innovative design minimizes downtime through rapid positioning and feeds, ensuring increased productivity. With a user-friendly control panel and extensive standard equipment—including a coolant system and chip tray—this milling machine is engineered for both ease of operation and maintenance. For greater capacity and accuracy in your machining tasks, request a quote for the UWF 6 today, and experience the advanced capabilities of our Universal Milling Machines. Kodsu E Nwbepfx Adwewt

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Ksdpfsqhkm Ssx Adwjwt

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Kedpfev Ai N Uex Adwjwt

Condition: used, Year of construction: 2015, x-travel 4.000 mm y-travel 2.100 mm z-travel 1.000 mm taper ISO ISO 50 Number of revolutions 5.000 rpm table-size 4.020x2.010 mm table weight 12.000 Kg Control Heidenhein iTNC530 Tools place 32 fach rapid taverse 15.000 mm/min weight of the machine ca. 39 t Kwedpfxjyb S Eaj Adwet dimensions of the machine ca. 10680x5600x5100 m

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Commissioning: 03/2010 Control: Heidenhain iTNC 530 Technical Data: Tool holder: SK 50 Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Motor power: 22 kW Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Kodpfxoya U Uuj Adwjwt Machine weight: 27,000 kg Scope of delivery: - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

Condition: excellent (used), CATALOG NUMBER 7393 Kwedpfxsx Tpt Hs Adwst TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm Kwedpfexa Egmjx Adwet - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm Kedpfxsxhdqge Adwjwt - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 2007, x-travel 1.050 mm y-travel 610 mm z-travel 610 mm control HEIDENHAIN iTNC 530 Distance between table and spindle 100-710 mm table-size 1.200 x 600 mm table weight 1.200 Kg Kedpfox Hp Dlsx Adwjwt rapid travel x/y/z 30.000/20.000 mm/min feed 12.000 m/min spindle taper BT-40 spindle turning speed range 60 - 10.000 U/min spindle drive 7,5/11 kW Tools changer 20 pos. Internal cooling system 20 bar Chip coveyor 2 handwheel HEIDENHAIN HR-410 tool diameter 100 mm tool length - max. 320 mm weight of tools max. 10 kg weight of the machine ca. 7 t dimensions of the machine ca. 2.900 x 3.420 x 2.888 m Complete installation 4th axis - Rotary table Golden Sun CNCT 321 (4th/5th axis)- Rotary table diameter 200 mm. - Rotary table tailstock - ZF box - Electrical cabinet air conditioning

Condition: used, Year of construction: 2000, x-travel 22.000 mm y-travel 1.500 mm z-travel 3.000 mm control SIEMENS 840 D milling head -swivable 0,001/0,001 Grad milling head Universalfräskopf 45° Internal cooling system 20 bar Chip coveyor ja Tools changer 30 pos. coolant 1.100 l Tool taper DIN 69871A ISO 50 total power requirement 45 kW weight of the machine ca. 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table Kedpfx Adsxvtf Njwswt (Regulator + Wires) /INCLUDED Coolant System in Electrical Cabinet INCLUDED Machine Weight 68.000 Kg. Machine Colour RAL 7038 – 5012 Portable Handwheel INCLUDED