Used Transformer Station for sale (5,846)

Condition: good (used), Year of construction: 1994, workpiece height (max.): 60 mm, feed rate X-axis: 11 m/min, total length: 4,800 mm, overall weight: 1,000 kg, Edge bander HolzHer, model 1437 SE, very well equipped; cartridge adhesive station, flush trimming with two milling units, radius R=3mm, two additional units available for exchange, profile trimming, chamfering. Fedpszzz Aaofx Aptegg

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Fgodpfxozzcc Ij Aptsg Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Main components • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. • Programmable automatic positioning. • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. Fjdpfszvc Duox Aptjgg • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Fjdex Ap I Hepfx Aptegg

Condition: like new (used), Year of construction: 2003, Dry three-phase distribution transformer - manufacturer ABB Brilon Germany, type Resibloc, 1000kVA, 10/0.4kV, IP00, uk=6%, Dyn1, Cu / Al winding, standard losses, used very briefly, fully functional. Fedpfx Ajzt Nwpeptegg

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely robust mechanical design and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical specifications (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Fodpfx Aozni Rxeptsgg Machine No.: BA 659 00 Year of manufacture: 08/2000 Electrical connection: 380 V (CEE plug included) Pneumatic connection: 6 bar "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. Fgjdezzz R Dspfx Aptog The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: K725490, type of input current: three-phase, overall weight: 7,430 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, secondary voltage: 500 V, protection type (IP code): IP00, input current: 173 A, type of output current: three-phase, output voltage: 500 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10KV (± 5%) to 500 V secondary with a capacity of 3000 KVA Fgedpfex Sv R Nox Aptsg

Condition: used, Year of construction: 2010, functionality: unexamined, overall weight: 4,640 kg, input voltage: 20,000 V, input frequency: 50 Hz, nominal power (apparent): 2,100 kVA, secondary voltage: 688 V, protection type (IP code): IP00, input current: 60 A, output voltage: 688 V, We are offering this used Siemens 4GB6367-9KA transformer, manufactured in 2001. Fgodpfx Aszwduqjptog Type: 4GB6367-1ZY Serial number: K812478 Year of manufacture: 2010 Rated capacity: 2100/1902/205 kVA Rated frequency: 50 Hz Vector group: Dyn6 Rated primary voltage: 20000 V Rated secondary voltage: 688 V Rated primary current: 60.6 A Rated secondary current: 1594 A Impedance voltage: 8.2% Max. short-circuit duration: 2 s Thermal class HV/LV: F/F Degree of protection: IP00 Cooling method: AF Transformer weight: 4.64 t Insulation level: AC50-L125/AC3 If you have any questions or require further information, please do not hesitate to contact us. 2 additional Siemens transformers from 2001 are available.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, The machine is in perfect working order and has been under continuous Quadient maintenance. MACHINE DETAILS Counter reading: 3,617,695 EQUIPMENT Tower feeder with 2 stations CIS reading Fjdpfxezzqabs Aptogg Datamatrix reading Inserter for attachments up to A4 size Enveloping module Stacker conveyor Conversion with C4 float switch Sealing possible with distilled water Matching base cabinet

Condition: used, Footprint: approx. 6000 x 7000 x 6850 mm Includes broach(es); not all are present. Rated force: 25 tons Fgsdezz Hl Tjpfx Aptog Peak force: 37 tons Stroke: 66" / approx. 1,676 mm Cutting speed: 0–33 ft/min Return speed: 0–60 ft/min Equipment: retraction unit Table: sliding table, 3 stations

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Fgedpfxezul Uts Aptsg Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: used, Year of construction: 2010, machine/vehicle number: 00100060311, Item No. 26090 Technical data: - Design: vertical - Max. operating pressure: 10 bar - Pressure vessel capacity: 270 l - Suction volume: 585 l/min - Delivery rate: 440 l/min - Compressor speed: 1200 rpm Fedjzd T S Ejpfx Aptsgg - Drive: 400 V / 4.0 kW - Boiler diameter, approx.: 600 mm - Space requirement, approx.: W 800 x H 1850 x D 900 mm - Weight, approx.: 150 kg

Condition: good (used), Holtrop & Jansman MSO-250 Fgsdjzzmadepfx Aptog Dust extraction system with negative pressure Connection diameter: 250 mm Capacity: approx. 4,000 m³/h at 2,000 Pa Motor power: 4 kW Fire protection flap Filter hoses: already replaced with an antistatic version.

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! Fgjdpfx Ajzmyfdsptsg In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Fsdpfx Apozxzagstsgg Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos. Fgjdpfozi Upcex Aptsg

Condition: ready for operation (used), Year of construction: 2020, laser power: 3,000 W, number of axes: 3, Tube cutting machine manufactured in 2020. This Bodor X2260 features a powerful 3 kW laser and is equipped with a CNC control panel interface, automatic chuck system, and a dedicated extraction system. It also includes a tube support roller and conveyor loading bed for enhanced efficiency. If you are looking to get high-quality tube cutting capabilities, consider the Bodor X2260 machine we have for sale. Contact us for further details. - Laser Power: 3 kW- Axis Configuration: Rotational chucking system for tube indexing and linear feed axes- Features: Automatic/pneumatic chuck system, tube support roller/conveyor loading bed, CNC control station with touchscreen interface, keyboard & mouse, dedicated Bodor extraction/filtration unit- Condition: Very well maintained, low operating hours Fodpezzzucjfx Aptogg

Condition: used, Year of construction: 2000, KOSME Extra Fix 16T rotary labelling machine for labelling bottles or other oval containers. Manufacturer: KOSME Model: Extra FIX 16T 1056 |S3 E2 + SL Year of manufacture: 2000 Capacity: up to 9,000 bottles/h Carousel: 16 stations Equipped with three cold glue labelling heads (front, back, and neck) Original electrical documentation. Fgedpfx Apoywchljtsg Technical condition: used machine, condition as shown in the photos.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Fgjdpfxox Hx Dno Aptsg Coolant pump Automatic measuring arm Transformer

Condition: used, Year of construction: 2000, machine/vehicle number: 164624, Höcker Clean Air Extraction System, Type: EA 300 - 7 A Extraction diameter: 300 mm Motor power: 7.5 kW Nominal flow rate: 5320 m³/h Note: Extraction system without discharge and without rotary airlock. Machine available immediately. Fgodpszxgtlofx Apteg Transfer in its current condition as inspected, without warranty or guarantees. Available from the Rosenheim warehouse.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm Fodpfx Ajv Iplaeptsgg travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Year of construction: 2009, condition: ready for operation (used), total width: 780 mm, total height: 1,600 mm, laser power: 20 W, product length (max.): 960 mm, number of axes: 3, This 3-axis Trotec Laser-Work-Station was manufactured in 2009. It features a powerful 20 W Nd:YAG / Pulsed Yb Fiber Laser with a marking field of 110 × 110 mm and a Z-axis travel of approximately 400 mm. The machine is designed for various applications including laser marking, engraving, and part identification. If you are looking to get high-quality laser marking capabilities, consider the Trotec Laser-Work-Station machine we have for sale. Contact us for further details. • Machine Type: Fiber Laser Marking Machine • Model: Laser-Work-Station • Laser System: SpeedMarker FL20 • Laser Type: Nd:YAG / Pulsed Yb Fiber Laser • Wavelength: 1064 nm • Laser Power: 20 W • Laser Safety Class: Class 2 (Enclosed Workstation) • Marking Head: Galvanometer Scan Head • Lens: F-Theta 160 mm • Marking Field: 110 × 110 mm • Working Distance: Approx. 200 mm Fgedpszibpisfx Aptjg • Focus Diameter: Approx. 40 µm • Pulse Frequency: 20–80 kHz • Pulse Width: Approx. 100 ns (@ 20 kHz) • Maximum Pulse Energy: 1 mJ (@ 20 kHz) • Beam Quality: M² ≤ 1.5 • Z-Axis: Electric • Z-Axis Travel: Approx. 400 mm • Maximum Workpiece Height: Up to 250 mm • Work Area: Approx. 400 × 400 mm • Worktable: T-Slot Plate • Automatic Safety Door • Dual Laser Pointer Focus Finder • Interior Workspace Lighting • Swiveling Monitor Arm • Operating Voltage: 230 V AC, 50/60 Hz • Total Power Consumption: < 500 W • Laser Unit Power Consumption: < 300 W • Cooling: Air-Cooled • Fiber Delivery Cable Length: 2 m • Operating System: Windows XP Professional • Control PC: Industrial PC • Processor: Intel Pentium 4, 3.0 GHz • Software: SpeedMark • 24 V Digital I/O Interface • Supports Barcode Marking • Supports 2D Data Matrix Codes • Supports Text Marking • Supports Date & Time Marking • Supports Vector Graphics Import • Supports Bitmap Graphics Import • Suitable Materials: Steel, Stainless Steel, Aluminum, Brass, Gold, Coated Metals, Plastics, Ceramics • Applications: Laser Marking, Laser Engraving, Part Identification, Serialization, Barcode & Data Matrix Marking, Logo Marking, Industrial Traceability

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Fgjdszzkvcjpfx Aptog Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Year of construction: 2023, condition: used, control Siemens voltage 400V, 50Hz V current intensivity 40 A operating pressure 4,5 bar total power requirement 15 kW weight 1.500 kg In our assessment, the machine is in like-new condition. Technical Features - Dimensional inspection of the cooling plate using measuring heads - Automatic label application - Siemens control Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Fgedpszbvivofx Aptsg Technical data and specifications are subject to change without notice. Prior sale is reserved.