Used Transmission Column Drilling Machine for sale (1,03,947)

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: Fsdewylvqspfx Aabopn - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Fpjdpfx Aaji Tvv Asbjn Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 234238, Sale only within EU member states! No private sales. MAE can be inspected on site. Any warranty rights are excluded. Fpodpfx Aew Ilh Ueabsn We do not assume any liability for the correctness of the technical data and year of manufacture, for the completeness of accessories and tooling equipment, nor for compliance with all safety and environmental protection requirements stated in the accident prevention regulations.

Year of construction: 1978, condition: ready for operation (used), Drilling spindle stroke: 160mm, spindle taper: MK4, spindle speed: 1750rpm, reach: 300mm, feed: 0.3mm/rev, table dimensions X/Y: 620mm/470mm, machine dimensions X/Y/Z: approx. 620mm/950mm/1900mm, weight: approx. 450kg. Includes coolant system and threading device. An on-site inspection is possible. Fpedpfexc Ni Djx Aabsn

Condition: new, Year of construction: 2025, Continuous/normal drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Throw (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), width dimension (mm) Number 2, 125, 13/26 Speed display digital Drilling depth display digital Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase 400V with frequency converter (kW) 1.5 Distance spindle/work surface (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with CEE plug 3-year guarantee for single-shift operation Free delivery Fpsdjir Ir Topfx Aabsn NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, QUOTE Technical data: Fedpfx Aaehglvksbopn - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: new, Year of construction: 2025, Tapping device OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Tapping capacity max. - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Projection (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with toothed rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor three-phase current 400V with frequency converter (kW) 4.0 Stepless spindle speeds R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Manual feed Weight (kg) 400 Optional drilling package 6 (€ 890.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK IV/B18 Fodsd Su Agopfx Aabjpn - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ALSO STOCK OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: good (used), Year of construction: 2001, machine/vehicle number: 2083-949, Offer 24470 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling capacity in steel ST 60: 35 mm - Thread cutting device - Drill spindle taper: MT 4 - Drill spindle stroke: 160 mm - 8 spindle speeds: 75 – 2100 rpm - 3 feed rates: 0.1 / 0.2 / 0.3 mm/rev - Throat depth: 280 mm - Max. distance table to drill spindle: 750 mm Fpjdpfxow Ad E Aj Aabon - Max. distance machined base plate to drill spindle: 1210 mm - Table with 2 T-slots: 420 x 400 mm - Height adjustable via rack and pinion with hand crank - Table tilts left and right - Drive: 400 V / 0.7 / 1.3 kW - Required space approx.: W 600 x H 2300 x D 950 mm - Weight approx.: 320 kg - Including: thread cutting device, coolant system - Keyless drill chuck 1-13 mm - Lighting

Condition: new, Year of construction: 2025, Thread cutting device Free-cutting device Programmable drilling depth cut-off Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Opt. R1: Stepless spindle speeds with countershaft, speed range 100-2000 rpm Opt. R2: Stepless spindle speeds with countershaft, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm throat depth 300 mm Usable table surface (swiveling) 590 x 450 mm Feed rate 0-300 mm/min stepless Fedpfx Aaod H Rh Rebepn Table height adjustment with toothed rack Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor rotary current 400 V pole-changing 1.5/3.0 kW Weight 420 kg Option drilling package no. 6: taper arbor B18/ Mk 4, quick-action drill chuck B18/ 3-16 mm, machine vice no. 2 -140 and T-slot screws, 890.00 EUR Option: automatic spindle stop with drill spindle top, 420,00 EUR Option: chip breaking module 420,00 EUR Delivery: free domicile incl. packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: good (used), Year of construction: 1998, Offer 25232 Technical Specifications: - Drilling capacity in steel ST 60: 32 mm - Drilling performance in steel ST 60: 46 mm - Thread cutting unit up to: M 30 - Drill spindle taper: MT 4 - Drill spindle stroke: 160 mm - Throat depth: 300 mm - Table with 2 T-slots: 615 x 430 mm Fpodpfswyupyjx Aabjn - Column diameter: 145 mm - Power feeds – electromagnetic: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Infinitely variable spindle speeds with digital display: 80 – 4000 rpm - Drive: 400 V / 1.4 / 2.2 kW - Electric foot switch - Lighting - Machine vice - Required space approx.: W 650 x H 2100 x D 1100 mm - Weight approx.: 450 kg

Condition: new, Year of construction: 2025, NEW - ex works Drilling depth and speed display - digital with background lighting Thread cutting capacity M30 (depending on pitch) Optional: R1 spindle speeds with gear ratio, infinitely variable, speed range 100-2000 rpm Optional: R2 spindle speeds with gear ratio, infinitely variable, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Thrust 300 mm Fedpfed H Rhnox Aabopn Usable table surface (swivelling) 590 x 450 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole-changing 1.5/3.0 kW Weight 420 kg 3 year guarantee FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1184-135-973, Offer 25248 Technical data: - Drilling capacity in steel ST 60: 45 mm - Maximum drilling capacity in steel ST 60: 55 mm Fpjdpfx Ajw Rvzdoabon - Spindle taper: MK 4 - Spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward and reverse operation - 3 automatic feeds with electromagnetic engagement: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Maximum distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Required floor space approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice - Keyless drill chuck 1 – 13 mm - Emergency stop button - Lighting

Condition: new, Year of construction: 2025, Thread cutting device OLED display LED lighting Continuous/normal drilling performance (mm) - R1 27/32 mm - R2 25/30 mm Thread cutting performance max. - R1 M34x3 - R2 M20x2.5 Spindle MK III Drilling depth (mm) 125 Throw (mm) 300 Column diameter (mm) 125 Usable table area (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,140 mm Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 370 Optional drilling package 5 (€ 855.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Fedpfx Ajtt Af Reabepn Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Fodpetz T Dvjfx Aabjpn Technical data: - Drilling capacity in steel ST 60 20 mm - Drill spindle holder MK 2 - Drill spindle stroke 120 mm - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Condition: new, Year of construction: 2025, Delivery time: immediately from stock Continuous/normal drilling capacity 35/40 mm Thread cutting capacity max. M30 (depending on pitch) Hand reversing switch for right-left rotation. Undervoltage release, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Thrust 300 mm Column diameter 110 mm Usable table surface [WxL] 420x340 mm Speed display scale Drilling depth display scale Drilling depth stop with fine adjustment Fpodpfjd H Rg Hsx Aaben Table height adjustment with rack Motor three-phase 400 V pole-changing 1.5/3 kW Spindle speeds with gear continuously variable 100-2000 1/min Machine dimensions (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Delivery: free of charge including packaging. FACTORY WARRANTY: 3 years NOT THE RIGHT MACHINE? WE ARE FLOTT'S SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1986, Offer 23389 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm Fpodpfxsrckv Ho Aabon - max . Distance machined base plate - drill spindle 1050 mm - Column diameter 160 mm - Coolant device - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: new, Year of construction: 2025, Standard equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electric. Protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Including electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: right-left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Throw: 300 mm Column diameter: 125 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table: 150-700 mm Infinitely variable spindle speeds: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with gear) 0-4,000 rpm Optional R1 or R2 without price surcharge Price surcharge R3: € 1,750 Accessories coolant system (€ 605) - separate container - filling quantity: max. 15 l - delivery rate max. 13.4 l/min Accessories drilling package 5 (€ 855) - vice [felix] 2.0 150 - taper mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Fedpfxjfmh Tle Aabjpn GUARANTEE: 3 years (single-shift operation) DELIVERY: free delivery including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1986, machine/vehicle number: 23036, Offer 23380 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max. distance machined base plate - drilling spindle 1050 mm Fedpfsrckw Isx Aabopn - Column diameter 160 mm - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: new, Year of construction: 2025, Drilling depth and speed display - digital Thread cutting capacity M20 (depending on pitch) Infinitely variable speed from 125 - 4000 rpm in two stages, stage change via belt shifting. Drilling capacity 25/30 mm Thread cutting capacity (depending on pitch) M20 Spindle MK 3 Drilling depth 125 mm Thrust 280 mm Usable table surface (swivelling) 420 x 340 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole-changing 0.9/ 1.45 kW Fsdpfx Aajd H Rffebopn Weight 275 kg OPTION 1 - € 610.00 Drilling package 4 consisting of: - Vice [felix] 2.0 - 120 mm, clamping range 0-168 mm - Keyless drill chuck, B18 mount, 3-16 mm (accuracy 0.17 mm) Tapered mandrel MK 3 B18 and reducing sleeve Mk3 to Mk 2, as well as MK 3 to Mk 1 OPTION 2 - € 1,215 Thread cutting device, max. M20, setting the thread cutting depth via digital depth display Delivery: FREE DELIVERY including packaging Factory guarantee: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1956, Offer 25296 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Max. drilling diameter in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 180 mm - Throat depth: 350 mm - Height-adjustable table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle: 550 mm - Max. distance machined base plate – drill spindle: 1140 mm - Column diameter: 200 mm - Feeds, electromagnetically controlled: 0.15, 0.2, 0.3, 0.36 mm/rev - With overload protection - Steplessly adjustable drill spindle speeds: - 60 – 210 + 210 – 765 rpm - 120 – 420 + 420 – 1530 rpm - Drive: 400 V / 2.3 / 3.4 kW - Electric footswitch - Coolant system - Work light - Machine vice Fpjdpfew S H Taex Aabjn - Quick-release drill chuck - Required space approx.: W 750 x H 2050 x D 1050 mm - Weight approx.: 650 kg

Condition: new, Year of construction: 2025, Standard equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electric. Protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Including electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: right-left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3.5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Throw: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Speed display digital Digital drilling depth indicator Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table: 150-700 mm Infinitely variable spindle speeds: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with gear) 0-4,000 rpm Optional R1 or R2 without price surcharge Price surcharge R3: €2,250 Accessories drilling package 6 (€875.00) - Vice [felix] 2.0 150 - Taper mandrel MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Fpjdjlfdufjpfx Aabjn GUARANTEE: 3 years (single-shift operation) DELIVERY: free delivery including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm Fsdpfjwdvwtsx Aabopn - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system

Condition: new, Year of construction: 2025, Continuous/normal drilling capacity 25/30 mm Thread cutting capacity max. M20 Fsdpodvhdiofx Aabepn Spindle MK III Drilling depth 125 mm Thrust 260 mm Column diameter 110 mm Usable table surface [WxL] 420x340 mm Speed display scale Drilling depth display scale Drilling depth stop with fine adjustment Table height adjustment with rack Motor three-phase 400 V pole-changing 0.90/1.45 kW Spindle speed with gear, infinitely variable 125-4000 1/min in 2 stages I: 125-2000 1/min II: 250-4000 1/min The stage change is carried out by changing the belt OPTION 1 - € 610.00 Drilling package 4 consisting of: - Vice [felix] 2.0 - 120 mm, clamping range 0-168 mm - Keyless drill chuck, B18 mount, 3-16 mm (accuracy 0.17 mm) Taper mandrel MK 3 B18 and reducing sleeve Mk3 to Mk 2, as well as MK 3 to Mk 1 Delivery: free of charge including packaging FACTORY WARRANTY: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system Fsdpowd Ii Uofx Aabepn - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Year of construction: 1984, condition: excellent (used), Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm spindle mounting MK 3 spindle speed infinitely variable by hand lever 140 - 1400 rpm Fpodeiulblepfx Aabon table size 500 x 360 mm drilling depth 150 mm column diameter 125 mm throat 300 mm drive power 1,5 kW weight approx. 350 kg mechanical feed by head pressure Technical data: drilling capacity in steel 32 mm drilling capacity in cast iron 36 mm spindle mounting MK 3 spindle speed stepless 140 - 1400 rpm table size 500 x 360 mm drilling depth 150 mm column diameter 125 mm throat 300 mm drive power 1,5 kW weight approx. 350 kg mechanical feed at the push of a button feed rates: 0.1 - 0.16 - 0.25 mm/revolution thread cutting device coolant device, drilling table lighting operating instructions Connection cable 16 A