Used Turbocharger Balancing for sale (985)

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Dsdszixziepfx Am Touw Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2016, machine/vehicle number: 985-7, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, FOR SALE — STETON P90C Hydraulic Hot Press Manufacturer: STETON s.r.l., Italy Model: P90C Year: 2016 Condition: Used, good working order Technical Specifications: Platen (pressing) area: 3000 × 1300 mm Press type: Hydraulic hot press Number of cylinders: 6 × Ø 70 mm Vwm Total pressing capacity: approx. 90–100 tons Vwm Cylinder stroke: 450 mm Frame: electro-welded steel profiles; balanced platen movement via racks, toothed wheels and guides DirectIndustry Heated platens with pipe coils for fluid circulation, mounted on machined surfaces with insulating panels to prevent heat loss; platens coated with aluminium sheet DirectIndustry Max. opening between platens: 450 mm DirectIndustry Dusdpsy Uibtofx Am Tew CE certified Typical applications: Veneering of chipboard and MDF panels, plywood laminating, hollow-core door production, furniture panel surfacing. Location: Estonia, EU. Export possible. Loading and transport by arrangement.

Condition: new, TC 205 x 1000 Center height: 205 mm Swing over bed: 410 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, Size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Continuously variable Mechanical pre-selection stages: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feed Z: 0.05 - 1.7 mm/rev Cross feed X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock diameter: 52 mm Tailstock quill: MK 4 Tailstock travel: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Tool machine accuracy according to DIN 8605 - Continuously variable speed control (2 pre-selection stages) Dujdpfx Amoir If Do Tew - Finely balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed gear with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication - Removable bridge Scope of supply: - 3-axis digital display (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool holder with four cassettes - High splash guard and integrated LED work light - Chip tray that can be extended forward - Slip clutch - Fixed steady rest with ball bearing inserts - Traveling steady rest - Micrometer bed stop - Machine feet (1 set of 6 pieces) - Two emergency stop push buttons - Foot pedal with double braking system (mechanical and electrical) - End-switch protected chuck guard, tool holder guard and cover for the lead screw and ball screw in accordance with European safety standards CE - Coolant system - 2 fixed centering points - Reduction sleeve for main spindle - Operating tool - Operating tool in a tool box - Operating manual with parts list

Condition: new, Maximum turning height: 250 mm Turning diameter over slide: 350 mm Turning diameter in the curve: 695 mm Distance between centers: 1500 mm Spindle nose: DIN 55029, cam lock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Duedpfx Amogt E Ilj Tjw Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions L x W x H, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker's precision - Stepless speed control (3 pre-selected stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed drive with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication system - Removable bridge - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - Frequency inverter - Machine stand with a high splash guard and integrated lighting - Chip tray that can be pulled out to the front - 3-jaw chuck - Fixed steady rest - Traveling steady rest - Micrometer bed stop - Oil cooler - Two emergency stop push buttons and a foot pedal with an electrical braking system - End-switch protected chuck guard, tool holder guard, and cover for the lead and feed screw according to European safety standards CE - Coolant system - Fixed center - Reduction sleeve for the main spindle - Operating tools in a toolbox

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Dedpfsvnrm Hsx Am Tjuw Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. table load: 300 kg Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast iron parts, such as machine frame, table, etc., made of MEEHANITE® quality cast iron - Automatic transverse and longitudinal feed Duedsd Sfd Ejpfx Am Tjw - Permanent lubrication - Automatic transverse feed device - Rear splash guard - Grinding wheel - Grinding wheel flange - Dressing device - Balancing arbour - Balancing scale - Dressing diamond - Machine lamp - Leveling elements - Operating tool - Operating manual - CE Special equipment for our stock machine: - Electric magnetic chuck 300 x 600 mm (fine-pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical feed AD 5 (NC-controlled) for model AH - Function: Automatic rapid traverse vertically and automatic fine feed vertically - Automatic demagnetization control for magnetic chuck - Coolant system with magnetic separator - Manual dressing device - Part enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for transverse feed - Grinding wheel and flange for normal steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations available on request.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Duedpfx Amjp Dt Tte Tew Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel Duedpfxsp Dt T Nj Am Tow - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 400 x 800 mm Installation height (max. distance spindle/table): 550 mm Max. Table load: 400 kg Motor power main spindle: 3,7 kW Connection: 400 V Dimensions (LxWxH), approx.: 3450 x 2050 x 1900 mm Weight, approx.: 3250 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond Dujdpfx Amjp Dt Uij Tew - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 3060 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: used, Year of construction: 1998, Technical Data: Grinding Area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding Height: 400 mm Longitudinal Stroke: 740 mm Cross Stroke: 270 mm Djdpfx Asxvy Hgjm Touw Clamping Surface of the Table: 1000 x 250 mm Distance Table to Spindle Center: 650 mm Max. Table Load: 400 kg Infinitely Variable Spindle Drive: 6 kW Max. Grinding Wheel Dimensions: ø300 x 60 x 127 mm Coolant System: 170 l Weight – Total Equipment: 4600 kg Features: - Fully electronic multi-axis control system, Brand NE (Manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of CNC axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as digital increment display integrated into handwheel - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Enclosed work area - Oil collection pans - CE marking Accessories: - 6x grinding wheel flanges incl. grinding wheels - 3x grinding wheel flanges - 1 extracting device for grinding wheel flange - 1 balancing arbor - 1 set of leveling plates and screws - Extraction unit - Extended vertical column for extraction unit

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. Dujdpeyvd Upofx Am Tew The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops Dsdpfjyc Rvajx Am Tsuw An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, pressing force: 44 t, Equipment: CE marking, documentation/manual, safety light barrier, For Sale: Cone TC15 CNC Press Brake (1600mm / 44T) High-Precision, Compact, and User-Friendly Bending Solution Upgrade your sheet metal production with the reliable and efficient Cone TC15 CNC Press Brake. Equipped with an advanced 15" touchscreen controller and full multi-axis automation, this machine is engineered to deliver exceptional precision, fast setup times, and maximum workshop productivity. Duedpfxozi N N Rs Am Tow Whether you are processing simple brackets or complex high-precision profiles, the Cone TC15 offers the perfect balance of power, a compact footprint, and modern technology. Key Features & Capabilities: Intuitive TC15 15" Touchscreen Interface: Large, crystal-clear user interface that makes programming seamless, quick, and efficient. Easy for New Operators: Designed with simplicity in mind—perfectly suited for experienced fabricators while allowing new users to become productive with minimal training. 2D Bending Simulation & Collision Visualization: Visualize the bending sequence in 2D before execution to ensure accuracy. Advanced safety features visually warn about potential collisions between the workpiece, tools, or machine frame. Advanced Multi-Axis Control: Full automatic control over X, R, Z1, and Z2 axes for complex bending geometries and maximum flexibility. Direct Angle Programming: Program directly in degrees for quick, uncomplicated adjustments on the fly. Smart Calculations & Tool Library: Built-in material and bending force calculation optimizes the required tonnage based on material thickness and type, extending tool life. Includes a comprehensive tool library for fast setups. Seamless Connectivity: Equipped with a USB port for easy program backup/loading and an Ethernet network interface for effortless factory integration. Integrated Production Counter: Built-in part counter keeps track of your batch volumes accurately. Technical Specifications: Control System: Cone TC15 (15" Touchscreen) Bending Length: 1600 mm Pressing Force: 44 Tons Backgauge Stroke: 600 mm Machine Dimensions (L x W x H): 2230 x 1550 x 2150 mm Machine Weight: 3000 kg Why Choose the Cone TC15? Thanks to its rigid design and advanced 4-axis backgauge (X, R, Z1, Z2), this machine ensures unmatched repeatability. Its compact dimensions make it an ideal fit for workshops looking to maximize their floor space without compromising on bending capacity or modern CNC features. Contact us today for more information, pricing, or to schedule a demonstration!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical details grinding length 600 mm grinding width 300 mm workpiece height - mm total power requirement 7 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 2800x2200x1890 mm Additional information Horizontal surface grinder in excellent condition Duedpfx Amjzild Rs Tjw The machine has been in operation for only a few hours. Work area • Travelling distance X-axis: 765 mm • Travelling distance Y-axis: 340 mm • Table dimensions: 300 x 630 mm • Scale ring division Y-axis: 0.02 mm • Scale ring division Z-axis: 0.005 mm • Autom. transverse infeed: 0.1-8 mm • Autom. vertical infeed: 0.005-0.05 mm Drive unit ratings • Motor rating main drive: 5.5 kW • Motor rating servo-drive: 0.5 kW Dimensions and weights • Total weight: 2,700 kg • Dimensions: 800 x 2200 x 1890 mm • Grinding wheel dimensions: 350 x 40 x 127 mm Accessories: 2-axis position display Knuth Xpos 3.1 Grinding wheel, Grinding wheel flange, Balancing arbor, Balancing stand, Halogen work light, Magnetic chuck 600 x 300 mm Leveling screws, Operating tools,

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Dedezikcxopfx Am Tjuw Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Duodpfx Amjvvkipj Tjw

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Dodpfx Asvvi Nzom Touw

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Duedjvvi N Ispfx Am Tjw

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Dodpfx Asvvi Rfom Teuw

Condition: used, Year of construction: 2011, Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. Dodpsythxaofx Am Touw The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  - Manufacturer: Paxona - Machine type: Tray line distributor / lane divider - Function: Distribution from 1 lane to 2 lanes - Year of manufacture: 2011 - Operating hours: < 5,000 h - Application: Tray conveying and line distribution - Condition: Used, low operating hours, store

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 350 mm grinding length: 1000 mm centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm spindle bore: 38 mm max. swivability: 90 ° weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Machine with CNC package and DFU connection Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Dodpew Rktzjfx Am Touw Final balance balancing device *

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm In General: Year of manufacture:2017 Control system:Siemens 840 Dsl Centre height:180 mm Centre distance:1,000 mm Maximum workpiece weight:150 kg X-Axis: Technology:Electromechanical Transverse speed:0.001 – 8,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) Guideway:Hydrostatic Z-Axis: Technology:Electromechanical Table speed:0.01 – 12,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) B-Axis: Technology:Continuously swivelling axis Resolution:0.001° Clamping:Hydropneumatic Workpiece spindle: Power:2.0 kW Speed:0–600 rpm Chuck:MK 5 and KK 5 C-axis:0.001° Grinding spindle: Disc configuration:left/right Power:9 kW Speed:1,400 rpm Internal grinding spindle: Power:2.2 kW Speed:60,000 rpm Tail stock: Quill stroke:40 mm Mounting:MK 4 Quill retraction:Hydraulic Cylinder fine adjustment:Yes Equipment: Coolant supply:Coolant system with filter Duodpfjzhdybox Am Tsw Emulsion mist separator:Mechanical Grinding wheel dresser:Diamond dressing tile Technology option I:Cone grinding Technology option II:Out-of-round grinding Balancing system:Automatic Grinding detection:Via structure-borne sound Workpiece measurement:Linear encoder Accessories:Various flanges, discs and mandrels

Condition: used, mileage: 4,07,216 km, power: 368 kW (500.34 HP), first registration: 05/2023, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2023, Equipment: air conditioning, central locking, cruise control, differential lock, full service history, power mirror, trailer coupling, - 1 Bunk - 3D Spoiler Kit - ACC - Adaptive Cruise Control - Work Lights - Heated Exterior Mirrors - Air-Suspended Co-driver's Seat - Simple Translation - Extra Cab Insulation - Air-Suspended Driver's Seat - FMS Interface (Fleet Management System) - Transmission Oil Cooler - I-Park Cool - Stand-Alone Air Conditioning - I-See - Automatic Temperature Control Air Conditioning - Cool Box - Radio CD MP3 Bluetooth - Disc Brakes - Sun Visor - Toolbox - VEB+ - Volvo Dynamic Steering - Xenon Headlights - Auxiliary Headlights Volvo FH500 6x2r 2 Tow Hitches Fifth Wheel Coupling / Ringfeder Central-Mounted Trailer Cross Member / Rockinger Globetrotter Safety Cab FH Diesel Engine 12.8 l, 510 hp / 375 kW, 2,550 Nm, Single-Stage Turbocharger VEB+ / Volvo Engine Brake+ Chassis Height: MED (Medium) VDS / Volvo Dynamic Steering with Personal Settings Steering Rear Axle Full Air Suspension I-Park Cool (Integrated Stand-Alone Air Conditioning with Automatic Temperature Control) I-Torque I-See ACC / Adaptive Cruise Control Work-Remote / Wireless Remote Control, Multifunctional Info and Media Package with Navigation and Volvo Connect Radio Reception: AM/FM and DAB/DAB+ (Analog & Digital) 8 Speakers: 4 in Dashboard, 1 in each Door, and 2 in the Sleeper Cab Driver Comfort Package Plus Living Package FH, One Bed Steering Wheel, Leather Version Driver's Seat Comfort, Air-Suspended, Heated, Seatbelt in Seat Air-Suspended Co-driver's Seat Two Armrests on Driver's Seat Armrests with Vinyl Covering Cool Box 33 l, with Freezer Compartment, Under Bunk Interior Lighting with Dimmer and Red Night Lighting Two Flexible Reading Lights Interior Sun Visor, Electric Roller Blind Reinforced Cab Insulation Electric Roof Hatch, Glass Cab Heater Switch Console (Luxury) at Bunk (Interior Light, Heating/Air Conditioning, Roof Hatch, Door, Alarm Clock, Window, and Radio) Rearview Mirrors, Heated and Electrically Adjustable with Close-Proximity Camera on Co-driver's Side Close-Proximity Camera on Co-driver's Side Connection Preparation for Analog Camera (Without Camera; for Trailer/Semi-Trailer) LED Main Headlights LED Fog Lights, Front LED Work Lights, Side, 2 in Front, 2 in Rear, LED White LED Tail Lights Cab Side Wind Deflectors, Short 1103WHIT Winter White I-Shift Driving Mode: Standard, Performance, and Economy Load/Axle Load Display in Vehicle Display Adaptive Cruise Control (ACC) with Collision Warning and Emergency Braking Function Driver Alert System Lane Departure Warning System with Steering Assistance Side Collision Avoidance and Turning Assistant (Both Sides) Connection for External FMS Systems Preparation for OBU (Toll Device, Toll Collect) Transmission/I-Shift Operation via Control Unit on Driver's Seat I-Shift AT2612, Automated 12-Speed Transmission Duodpfx Amozkkk Sj Tjw Transmission Oil Cooler, Water/Oil Drive Axle Ratio 2.31 : 1 Rear Axle RSS1344E Electro-Hydraulic Steering on Steering Rear Axle, Liftable Axle Air Tank, Aluminum Air Suspension, Front Air Suspension, Rear 112 L AdBlue Tank 650 L Aluminum Tank, Left 330 L Aluminum Tank, Right 2 Tow Hitches Fifth Wheel Coupling / Ringfeder Central-Mounted Trailer Cross Member

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO Djdezhma Djpfx Am Tsuw MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: new, functionality: fully functional, type of input current: three-phase, total height: 575 mm, total width: 300 mm, total length: 600 mm, input voltage: 400 V, overall weight: 39 kg, type of cooling: air, electrical fuse: 32 A, sheet thickness aluminum (max.): 8 mm, welding power (max.): 13 kVA, open-circuit voltage: 70 V, welding current at 60% duty cycle: 280 A, welding current at 100% duty cycle: 250 A, input current: 15 A, protection type (IP code): IP23, welding current (min.): 300 A, welding current (max.): 10 A, Professional inverter TIG/MMA welding machine LogiTIG 300 AC/DC for sale. Suitable for welding aluminum, stainless steel, and mild steel. The machine supports TIG AC/DC and MMA modes, and features HF ignition, pulse function, 2T/4T modes, adjustable AC frequency, and balance control. This unit offers a high duty cycle of up to 300 A, making it suitable for professional and industrial applications. Compatible with foot pedal and remote control connections. Duodpfx Amey U E Rws Tow