Used Turbocharger Balancing for sale (1,052)

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 100 kg, Vertical Balancing Machine Ledpjylqg Defx Akmjru Max.Rotor Weight 100 kg Min.Rotor Weight 5 kg Min.Diameter 100 mm Max.Diameter 800 mm Engine Power 5.5 kW

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, 3 Tone Horizontal Balancing Machine Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Lsdjr Dd Avjpfx Akmsru Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 101402, type of input current: three-phase, input current: 50 A, input frequency: 50 Hz, input voltage: 400 V, power: 20 kW (27.19 HP), CEMB ZB200/TC/TA rotor balancing machine in good working condition. Used for rotors in sizes 160-250. Fully operational. Last test on 17/04/2025. Ljdpoygbfgefx Akmeru

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity Ledpfx Aex Ein Sokmsru - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: CMT 30/STATIC, Non-rotating industrial balancer for grinding wheels, brake discs, fans, rims, etc. Automatic balancer for a wide range of applications. Lsdpfsw Hwlwox Akmeru

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 10,000 kg, total length: 4,000 mm, H-IHB-10 Horizontal Balancing Machine Feature Specification Maximum Rotor Weight 10.000 kg (22046 lb) Minimum Rotor Weight 150 kg (331 lb) Lredpjzfbibefx Akmju Maximum Rotor Diameter 2000 mm (78.7 in) Minimum Shaft Diameter 40 mm (1.57 in) Maximum Shaft Diameter 320 mm (12.6 in) Motor Power 22 kW (29.5 HP) Inverter Capacity (VFD) 22 kW (29.5 HP) Maximum Balancing Speed 0 - 1500 RPM (Adjustable via VFD; higher speeds available upon request) Drive Unit (Standard) End-Drive (Cardan Shaft) Drive Unit (Optional) Belt Drive Bed Length 4000 mm (157.5 in) Unbalance Reduction Ratio (URR) ≥ 95% Loading Per Pedestal 5000 kg (11023 lb) Machine Total Weight 1700 kg (3748 lb) Minimum Achievable Residual Unbalance 1 g.mm/kg Locating Time 30 - 60 seconds Measuring Unit MBS IBalancer v2.8 Control System Windows OS, Intel-based processor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Lredpfox H Aa Tex Akmou Machine is available because fans are no longer built by the customer.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 1,000 kg, 1 Tone Horizontal Balancing Machine Maximum Rotor Weight --- 1000 kg (2,204.6 lbs) Minimum Rotor Weight ---10 kg (22.05 lbs) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---10 mm (0.39 in) Maximum Shaft Diameter ---240 mm (9.45 in) Lsdpfoq T Ikljx Akmoru Motor Power ---7.5 kW (10.06 HP) Drive ---7.5 kW (10.06 HP) Maximum Balancing Speed ---0-1500 RPM (25 Hz) (up and down adjustable) Drive Unit ---Belt Drive Unıt / Cardan Possible Bed Length --- 3000 mm (118.11 in)

Condition: not inspected (used), Year of construction: 1970, Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Technical data: Lsdpshikdwefx Akmoru Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: good (used), mileage: 3,03,015 km, power: 130 kW (176.75 HP), first registration: 09/2019, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 800 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, gearing type: mechanical, emission class: euro6, total length: 7,300 mm, total width: 2,300 mm, total height: 3,000 mm, displacement volume: 1,968 cm³, nominal power: 130 kW (176.75 HP), Equipment: ABS, Bluetooth, EBS, USB port, electric window regulation, electronic stability program (ESP), power mirror, tail-lift, trailer coupling, Key Features Internal Reference: 26223M Chassis Number: WV3 ZZZ SZZ K90 682 75 Serial Number: 222.947.352 Vehicle Model: Crafter 35, Flatbed with Tarpaulin, Tail Lift, Turbo Vehicle Make: Volkswagen Product Category: Tarpaulin Cover Condition: Used Mileage: 303015 Emission Standard: Euro 6 Date of First Registration: 23.09.2019 Last Inspection (MOT/TÜV): 17.09.2019 Fuel Type: Diesel Overall Vehicle Condition: Good Engine Displacement (ccm): 1968 Engine Power: 177 Transmission Type: Manual Suspension: Steel-Steel Cab Vehicle Equipment: ABS, Tow Hitch, Bluetooth, CD Player, EBS, Electric Windows, Electric Mirrors, ESP, Radio, USB Interface Number of Seats: 3 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 4x2 Axle 1: 235/65 R 16 C/3mm, Disc Brakes, Leaf Suspension Axle 2: 235/65 R 16C/3mm, Disc Brakes, Leaf Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight (GVW): 3500 Payload: 800 Unladen Weight: 2700 Vehicle Wheelbase: 4500 Vehicle Height: 3000 Vehicle Length: 7300 Vehicle Width: 2300 Trailer Load Capacity: 3500 Ljdpfx Aoz Hpmhskmsru Body Body Manufacturer: Ariva Internal Body Dimensions (L x W x H): 4333/2000/2180 Tail Lift Tail Lift Brand: Trösch Tail Lift Platform Length: 1600 Tail Lift with Remote Control: Yes Tail Lift Year: 2019

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Lsdpfx Aksu Ic Aiomsru Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Condition: good (used), functionality: fully functional, Manufacturer: HOFMANN Type: NG-1 Ljdpfxozzlnmj Akmoru Machine No.: 922472 Max. disc diameter: 320 mm Max. loading weight: 20 kg

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, MBS BALANCE Horizontal Balancing Machine H-IRB-300 Technical Specifications Max.Rotor Weight 300 kg Lsdpfju Eu Thjx Akmjru Min.Rotor Weight 15 kg Max.Rotor Diameter 800 mm Max.Shaft Diameter 130 mm Motor Power 4 kW Bed Length 1500 mm

Condition: used, Year of construction: 2005, operating hours: 8,592 h, Equipment: all wheel drive, Just arrived! Liebherr 524 - excellent machine for storage operations!!! No particulate filter - no AdBlue - no exhaust gas treatment!!! TOP Chassis number: VATZ0438AZB013004 Year of manufacture: 2005 Recorded operating hours: 8592 Liebherr 4-cylinder inline engine, water-cooled with turbocharging and charge air cooling, 86 kW - 118 hp, Version: 33 km/h - hydrostatic drive with 2 speed ranges * Air conditioning * 2 additional headlights on the front of the cab roof * 1 additional headlight on the rear of the cab roof * Debris screen in front of the radiator * Air intake with pre-separator "TopAir" Ljdpfj Ad Ta Hex Akmsru * Road approval possible! * Tires 17.5 x 25 front, 2 x 50% tread * Tires 17.5 x 25 rear, 2 x 40% tread Purchase price for fixed-mount bucket, approx. 2.2 cubic meters: 28,900.00 EUR net, export/domestic, plus 19% VAT. Optional equipment available at an extra cost: Quick coupler, hydraulic, 3,550.00 EUR * High-dump bucket from 3.0 cbm from 4,950.00 EUR * Bucket with lowering device for quick coupler, 3.0 cubic meters from 3,660.00 EUR * Volume bucket 4 cubic meters 4,500.00 EUR * 4-in-1 bucket 2 cubic meters on request. * Pallet fork 5 or 8 tons from 2,190.00 EUR All prices net, plus 19% VAT. Inspection by appointment only! Sale only to commercial businesses or for export. Sale in "as is" condition, as the machine stands. No guarantee or warranty. The indicated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle as part of the payment. We are available to answer any further questions you may have. For our customers from abroad, we prepare all customs and export documents for a smooth transfer to their country.

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 45 kg, load capacity: 3,000 kg, Load balancing device, also commonly referred to as a "balancer," can be used in crane operations. A chain hoist is used to bring loads into a horizontal position or a specific angle of inclination; this can include, for example, wall, roof, and ceiling elements, or also precast concrete components such as stairs. Lrodpfx Asz Ntlbskmju

Condition: used, Year of construction: 2001, functionality: unexamined, load capacity: 600 kg, Dalmec MXF Ceiling Balancer-Manipulator Lrjdpjv Diidofx Akmou Manufacturer: Dalmec lifting systems Model: Dalmec MXF Manufactured: 2001 Lift capacity: 600 Kg Pressure: 0.90 MPa

Year of construction: 2024, condition: like new (used), Specifications: Manufacturer: Mettler Toledo Model: XPR4002S Maximum capacity: 4100 g Readability / division: 10 mg / 0.01 g Power supply: 12 V DC, 2.25 A Country of manufacture: Switzerland The XPR4002S is part of Mettler Toledo's XPR Excellence series and is designed for accurate routine weighing in laboratory, quality control, pharmaceutical, and industrial environments. Features include: Large color touchscreen interface High-capacity precision weighing up to 4100 g Readability of 0.01 g Integrated weighing methods and result management Sample ID and Task ID entry Modern Mettler Toledo user interface Ledpfx Aksz E A Iiomeru Robust weighing platform Compact benchtop design Condition: Used, very good condition Tested and fully operational Display and touchscreen functioning correctly Weighing function tested Clean cosmetic condition Included: Mettler Toledo XPR4002S precision balance Weighing platform Power supply / cable as pictured Serial number: C448140625 The balance is available immediately from stock in Belgium. Worldwide shipping can be arranged. Please contact us for additional pictures, a shipping quotation, or a formal offer.

Condition: used, This listing is for a Sartorius Cubis MCE10202S-2S00-0 Balance with unit is in full working condition and is ready for immediate release. Experience unparalleled precision and versatility in laboratory measurements with the Sartorius Cubis MCE10202S-2S00-0 Balance, a standout model in the innovative Cubis II series. Key Features: High Capacity and Readability: With a capacity of 10,200 g and a readability of 0.01 g, this balance is ideal for weighing larger samples with utmost accuracy. Exceptional Reproducibility: Achieve consistent results with a reproducibility of ±0.007 g, ensuring reliable data across multiple measurements. Impressive Linearity: Maintains accuracy with a linearity specification of ±0.02 g, making it suitable for critical weighing tasks in demanding environments. Spacious Pan Dimension: The balance features a spacious weighing pan measuring 8.1 in x 8.1 in (206 mm x 206 mm), accommodating a variety of sample sizes comfortably. User-Friendly Display: Equipped with an MCE Touch Screen Back lit display, it offers intuitive navigation with manual level control and a motorized internal calibration feature for convenience. Ledpfx Aexxzaajkmsru Additional Information: Modular Weighing System: The Cubis II series allows for individual configuration from various components, enabling users to adapt the balance to specific weighing tasks seamlessly. Versatile Applications: This balance is suitable for a broad range of laboratory applications, including research, quality control, and educational settings, making it a versatile tool for scientists and educators alike. Range of Options: The Cubis II series boasts a selection of premium laboratory balances with maximum loads ranging from 2.1 g to 70 kg and readability options between 0.1 μg to 1 g, providing tailored solutions for different measurement needs.

Condition: used, Technical details: balancing body max.: 7000 kg balancing body diameter w/o machining unit: 1870 mm balancing body diameter with machining unit: 1870 mnm distance between bearing centers: min. 200 mm rotation weight: 7000 kg Rotor-Ø: 1870 mm Bearing journal Ø: 40 - 180mm mm control: CAB 690 voltage: 380 V /50Hz V/Hz Ledpfxozuyd Nj Akmsru Rotor weight: 40–7,000 kg Machine overload capacity with symmetrical loading: up to 9,000 kg, i.e. max. 4,500 kg per bearing pedestal 1 × machine bed, divisible: 3.85 m + 2.0 m *

Condition: used, This listing is for the Sartorius Cubis MSE20201S Balance + YDP30 Printer The unit is in full working condition and is ready for immediate use A high-capacity laboratory balance designed for accurate weighing of larger samples, typically used in labs, industrial settings, production environments or quality control applications. Typical Use Weighing large containers, batches of raw materials, or intermediate products Integrating into lab information systems Lrsdpfxey Iw Die Akmeu Feeding weight data to printers, LIMS, or control software The Sartorius YDP30 is a compact laboratory thermal printer designed primarily to work with Sartorius balances and other lab instruments. It’s built for accurate, compliant printouts of measurement data, labels, and reports in regulated environments like quality-control, research, and industrial labs

Year of construction: 2020, condition: used, More information will be provided upon request. Ledpfx Akszwnrmomoru

Condition: new, workpiece weight (max.): 10,000 kg, rotor diameter: 2,500 mm, Horizontal soft-bearing Balancing machines 9K719 with load capacity from 100 to 10000 kg are designed for high-precision balancing of rotors of electric motors, pumps, compressors, blowers and exhausters, gearboxes, turbines of power engineering. Self-aligning rollers ensure proper rotor alignment, simplifying setup and reducing balancing time. Combined Drive System has a unique configuration with two axial drives and a belt drive mounted on a single bed. Overall, this machine is highly versatile and effective in balancing various types of rotors, making it ideal for repair and production shops. HIGHLIGHTS • Soft-Bearing System: This system ensures linear sensitivity across the entire speed range during balancing. The result is exceptionally high balancing accuracy, achieving up to 0.04 g·mm/kg across all rotor mass ranges. • Self-Aligning Roller Cassette automatically adjusts to the rotor along two axes, eliminating the need for precise centering. This design reduces machine setup time and, consequently, the overall time required for balancing. • Wide Contact Area Rollers: The cylindrical rollers provide a broad contact surface, preventing scoring or deformation of the rotor's support surfaces. This is crucial when balancing heavy rotors for extended periods, minimizing the risk of damage due to prolonged contact or improper loading. • Combined Drive System: Rotors of relatively low mass can be driven by “belt drive”, which makes the machine more versatile and allows balancing a very wide range of parts. Heavy rotors are rotated by "axial drive" using a cardan shaft. • Rotor Jacks: Specialized loading devices can be integrated to ensure smooth and precise rotor placement onto the roller supports. This minimizes the risk of damage to the delicate roller assembly, particularly when handling heavy or sensitive rotors. • High balancing accuracy due to automatic calibration of the balancing machine directly for each rotor by determining the influence coefficients. Its ease of use, high measurement accuracy, and integrated specialized features enable balancing professionals to achieve outstanding results in the shortest possible time. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. Lodpfswdgptjx Akmoru • No need for special foundations and vibration isolation, no need to fix the machine to the floor. SPECIFICATIONS Weight range of balanced rotors 100 - 10'000 kg Maximum rotor diameter (above the bedding) 2500 mm Distance between centres of rotor supports 400 – 5600 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 1000 rpm Electric motor power 30 kW Parameters of the supply network 380V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lredpfx Akewgnu Nsmou Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 50 kg, total width: 400 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 950 kg, Equipment: documentation/manual, The KKT Universal BA & KA balancing machine is a horizontally operating industrial balancing machine for precision balancing with belt drive and cardan shaft drive. It is suitable for balancing motor armatures of various sizes, as well as shafts, fan impellers, grinding wheels, cardan shafts, and similar rotors. We offer this machine in various versions, both as a used machine and as a new machine built to meet customer requirements. Please feel free to contact us - we will be happy to provide you with comprehensive advice and support. Lodpfxof Sqiqe Akmsru

Condition: used, This listing is for a Vibra HTR-220E Balance Lodoxzg Tkopfx Akmjru