Used Turbocharger Balancing for sale (1,012)

Condition: new, Turbocharger core balancing machine DBST-20 Low-speed turbocharger core balancing machine meets the needs of turbocharger repair workshops. Machine is used for balancing common truck and passenger car turbos. It is multi-functional and universal, so it is suitable for many large turbochargers of special vehicles, railroad and marine turbines, and even for industrial turbochargers of gas and diesel power plants. The DBST-20 is used for balancing common truck and car turbochargers. It is multifunctional and universal, so it is suitable for many large turbochargers of special vehicles, railway and marine turbines, and even industrial turbochargers of gas and diesel power plants. Fpodpfxen Nxcfs Ap Den This stand allows for the final balancing of cartridges due to the specific design features of large turbines. The stand is used for balancing turbocharger cartridges at low speeds, as well as for checking turbocharger cartridge oil leaks. This is a larger version of the DBST-10 model that our company has developed specifically for large turbochargers weighing up to 30 kg. HIGHLIGHTS High accuracy of determining the unbalance of the rotor (0.4 g ∙ mm / kg). Reinforced torsional vibration suspension - high accuracy of vibration transmission, quality balancing results. Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos. Includes adapters for installing turbochargers with lower oil inlet. Oil system with oil heating allows to recreate similar conditions to the real one during balancing. 3-stage system of oil filtration allows to eliminate an unbalance directly on the machine by portable grinders. The measuring system displays the balancing process in real time and monitors the rotor unbalance behaviour on the screen to achieve the best possible result. Rotor adjustment and machine calibration are performed by the operator, ensuring maximum machine sensitivity at all times. Safe turbo shaft speed allows risk-free quality running-in of assembled cartridges, which significantly increases cartridge reliability after repair. KEY FEATURES • High accuracy 2 plane balancing • Truck and car turbocharger balancing • Any turbocharger can be installed • All type turbocharger adapters included • Quick and easy turbo core installation • Balancing speed up to 10 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Calibration of the machine by the operator • Industrial fanless touch screen PC control system • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum turbocharger weight 30 kg Maximum turbocharger diameter 300 mm Maximum turbocharger length 300 mm Maximum rotation speed 10 000 rpm Minimum achievable residual specific imbalance, 0,4 g mm/kg Pneumatic system operating pressure 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1350 mm Weight 285 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Fpsdpoq I Rz Refx Ap Den

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Fpodpfjq Nin Usx Ap Don

Condition: ready for operation (used), Year of construction: 2007, Available immediately from our location: CNC vertical balancing machine, TIRA Type KV 10 Fpodpez Ixi Ijfx Ap Djn Year of manufacture 2007 Rotor mass 1 – 10 kg Rotor height up to 400 mm Rotor diameter up to 400 mm Max. balancing speed up to 2000 rpm Max. display sensitivity (gmm) 0.5 Drive power 2.2 kW Weight 1500 kg Price: EUR 2,000.00 (plus VAT, ex works)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Fsdpfxsz Hmhio Ap Dopn Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Renewed Wear Parts Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: AHG0482, workpiece weight (max.): 7,000 kg, total width: 2,400 mm, total length: 5,100 mm, total height: 2,000 mm, input voltage: 400 V, rotor diameter: 1,600 mm, year of last overhaul: 2026, The testing machine is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. The drive has been converted to direct current. We use the system as follows: up to 7000 kg, up to 700 rpm up to 2500 kg, up to 1500 rpm up to 1500 kg, up to 3000 rpm up to 250 kg, up to 4200 rpm The system can be inspected in Neusäß by prior arrangement. Fpedpfjzu Rgujx Ap Den

Condition: reconditioned (used), IRD Model B750 End Drive Balancing Machine. Capacity 34,000kg (75,000lbs). Maximum Balance Length 5000mm (Approx). Fpodpfxsz Eay Ne Ap Dsn Max Rotor Diameter 3250mm (128"). Max Journal Diameter 508mm (20"). With IRD Model 295 Balancing Instrument and Operating Manual. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79268 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Automatic cycle turbocharger balancing Fpodonfvmhopfx Ap Den • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg We manufacture fuul range turbo repair equipment. Please contact us to get more info! 👇

Condition: used, functionality: fully functional, USED ELECTRONIC WHEEL BALANCER, CEMB ZE 100/TC. Fpsdpfx Apezh Ehyj Djn

Condition: used, Year of construction: 1963, balancing body min/max. 30 - 5000 kg Fedpfx Aezkbqpsp Depn balancing body diameter with machining unit 2100 distance of bearings kleinster 240 mm dia. axle journal 35 - 180 mm weight of the machine ca. 400 KG

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue Fjdpfx Aoq Umcrep Dspn - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: as good as new (ex-display), CMT–VSR Pro is an advanced high-speed core balancing machine including a manually operated, fixed-mount correction cutter that ensures a fine quality surface finish and a servo-controlled air valve to provide the highest measuring accuracy. The machine has been designed for the high-speed balancing of turbocharger core assembly of passenger car, light- and heavy-duty trucks. It is used for checking whether there is any unwanted dynamic phenomenon of a rotor at high rotational speed value e.g. the flexural of shaft by the moment of force. Balancing in a full range of rotational speed extends lifespan of turbocharger and eliminates the undesirable effect of whistling. Fedpfx Apeiihqws Djpn Core is installed on the hub of the machine by the use of a mounting flange with the two clamps to lock it. Turbine wheel is driven by compressed air supplied through a drive sleeve with a nozzle system. During a measurement an oil with an appropriate temperature and pressure is supplied, as a result of which the balancing conditions are similar to those of a combustion engine. As a result, the vibration graph of a core in relation to a rotational speed value and a vibration norm is displayed. In addition, to simplify the analysis of the vibration graph, the software indicates the exact angular position of a mass correction

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Fpodeu Nmppopfx Ap Den

Condition: used, Year of construction: 1961, workpiece weight 300 kg workpiece length 1200 mm diameter 1300 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Fsdpfx Ajy Swhvep Djpn than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, workpiece weight (max.): 20,000 kg, total width: 3,000 mm, total length: 9,000 mm, total height: 3,000 mm, type of input current: DC, SCHENCK, HM60U, max diameter 3000mm, max weight of rotor 20.000 kg, New measuring unit CAB920 SmartTouch (2025) SCHENCK, Protection enclosure included, CE sign, calibration certificate February 2026, drive 75kW drive with high speed gear box 3 shifts, pair of roller bearing for journal dia. 50 - 200 mm, pair of roller bearing for journal dia. 200 - 400 mm, lubrification system for roller carriages Fodpfjylin Hox Ap Depn

Condition: used, Year of construction: 2018, functionality: unexamined, input current: 10 A, input frequency: 50 Hz, overall weight: 1,200 kg, CNC Shaft Inspection and Balancing Machine Fpsdeyhq Nqjpfx Ap Djn Maximum shaft length: 800 mm 230V 50 Hz L = 1300 mm; W = 1000 mm; H = 1300 mm

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 20 kg, Maximum Rotor Weight ---20 kg (44.1 lb) Minimum Rotor Weight ---0.5 kg (1.1 lb) Maximum Rotor Diameter ---450 mm (17.72 in) Minimum Shaft Diameter ---5 mm (0.196 in) Maximum Shaft Diameter ---50 mm (1.968 in) Motor Power ---0.75 kW (1.01 HP) Fpsdpfxoq T Riws Ap Dsn Maximum Balancing Speed --- 0 – 8000 RPM (Adjustable) Drive Unit ---Belt Bed Length ---700 mm (27.6 in)

Condition: used, Year of construction: 2001, functionality: unexamined, load capacity: 600 kg, Dalmec MXF Ceiling Balancer-Manipulator Manufacturer: Dalmec lifting systems Model: Dalmec MXF Manufactured: 2001 Lift capacity: 600 Kg Pressure: 0.90 MPa Fpedpjv Diidsfx Ap Dsn

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Fpodpfx Aouh Svpjp Dsn

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 6 kg, The H-IRB 6T is a high-precision, belt-driven horizontal balancing machine designed for small rotors and shafts. It combines compact efficiency with industrial-grade reliability. Maximum Rotor Weight 6 kg (13.23 lb) Minimum Rotor Weight 0.1 kg (0.22 lb) Maximum Rotor Diameter 300 mm (11.81 in) Minimum Shaft Diameter 4 mm (0.16 in) Maximum Shaft Diameter 25 mm (0.98 in) Motor Power 0.4 kW (Servo System) Maximum Balancing Speed (Adjustable via potentiometer) 0 – 10,000 RPM Drive Unit Belt Bed Length 400 mm (15.75 in) Machine Weight 500 kg (1102.3 lb) Fodpfszfbh Dex Ap Depn Min. Achievable Residual Unbalance 0.1 g·mm/Kg Cycle Time 8-30 s Software MBS IBalancer v2.8 Language English Processor Intel-based processor OS Windows 11

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 5,900 mm, Cardan Shaft Balancing Machine Maximum Rotor Weight 300 kg Minimum Rotor Weight 10 kg Maximum Rotor Diameter 600 mm Fedpfx Apszfbh Rj Dopn Minimum Shaft Diameter 10 mm Maximum Shaft Diameter 140 mm Motor Power 4 kW Inverter Capacity (VFD) 4 kW Maximum Balancing Speed 0 - 1500 RPM (Adjustable via VFD) Drive Unit Belt Drive Bed Length 5900 mm Unbalance Reduction Ratio 98% Machine Total Weight 1400 kg Measurement Sensitivity 1 g·mm/Kg Locating Time 30 - 60 seconds Measuring Unit MBS IBalancer v2.8 Control System Intel-based processor Windows OS

Condition: new, Year of construction: 2026, functionality: fully functional, Our most advanced software delivers incredibly sensitive measurements. Only 1.5 seconds to measure. Validation world-wide. Balancing speed - up to 300,000 revolutions per minute. Long lasting mechanical quality. 7/24 online support. 10 pieces of nozzles (28 - 65mm). 25 pieces of flanges. Fjdpeq Tr R Sofx Ap Djpn Five-stage oil filtration system. A core oil leak test. Automatic air flow control valve. Prevent turbo from running dry by controlling oil pressure and temperature. Energy-saving and cost-saving adapter system. Adapter changeover time is less than 15 seconds. Free online technical support during the warranty period and after the warranty period. Support for spare parts. Required capacity of the air tank 1/2 m³. Colour printer. (Ops) Dremel for grinding. (Ops)

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 100 kg, Vertical Balancing Machine Max.Rotor Weight 100 kg Min.Rotor Weight 5 kg Min.Diameter 100 mm Fpsdpfoylqg Dox Ap Don Max.Diameter 800 mm Engine Power 5.5 kW

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, 3 Tone Horizontal Balancing Machine Maximum Rotor Weight ---3000 kg (6613.87 lb) Fsdpsr Dd Avefx Ap Depn Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 101402, type of input current: three-phase, input current: 50 A, input frequency: 50 Hz, input voltage: 400 V, power: 20 kW (27.19 HP), CEMB ZB200/TC/TA rotor balancing machine in good working condition. Used for rotors in sizes 160-250. Fully operational. Last test on 17/04/2025. Fodpfx Aeygbfgop Depn