Used Turning Station for sale (12,095)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) Fgsdjyaqgyopfx Af Sjd - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Fodpfx Ajy S Tm Uef Ssgd Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: used, Tornos CNC-controlled multi-spindle turning center Type/Model: Torno Multi Deco 20.8 Condition: Used, very well maintained Machine hours: approx. 65,724 h Technical data: Bar diameter: 5-20 mm Max. part length (without secondary operation): 100 mm Max. part length (with secondary operation): 80 mm Spindle rotational speed: up to 5,000 rpm Fjdpfx Afezgw Aaj Segd Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Number of numerical axes: 22 Facing slide (axial): 2 Cross slide (radial + axial): 5 Longitudinal slide: 7 Parting slide: 1 Counter spindle motor power: 1.1 kW Dimensions (L x W x H): approx. 5,880 x 1,400 x 1,950 mm Weight: approx. 7,200 kg

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm End units (longitudinal slide): 200 mm Fjdjzgwp Hopfx Af Sogd Spindle & axes Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Equipment / accessories: Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable

Condition: used, Year of construction: 2023, operating hours: 3,700 h, functionality: unexamined, machine/vehicle number: 22260005, travel distance X-axis: 255 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 382 mm, Equipment: documentation/manual, j.stumpf [at] ivg.auction CNC turning machine SCHUSTER VD20 with automation and peripherals Technical data Working area Fodpfxjzdtqns Af Sjgd Maximum turning diameter: 250 mm Maximum turning length: 250 mm Number of spindles: 2 Number of tool positions: 12 Control system: SIEMENS Sinumerik 840D SL Year of manufacture: 2023 Serial number: 22260005 Recorded operating hours: 3,635 Electrical connection: 3P~ / N / PE (TN-C-S system) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V DC Total weight: approx. 14,000 kg Travel paths / feeds Z-axis: Travel path 370 mm, rapid traverse 50 m/min, maximum acceleration 8 m/s², feed force 9,000 N X-axis: Travel path 250 mm, rapid traverse 30 m/min, maximum acceleration 8 m/s², feed force 9,000 N Y-axis (optional): Travel path ±40 mm, rapid traverse 15 m/min, maximum acceleration 5 m/s², feed force 15,000 N Turning spindles Maximum spindle speed: up to 4,500 rpm Rated spindle speed: 2,500 rpm Spindle nose: DIN 55026-A6 Spindle bearing inner diameter: Ø120 mm Spindle power (100% duty cycle, S1): 26 kW Spindle torque (100% duty cycle): 100 Nm Equipment / Features The system includes a KUKA handheld unit, a KNOLL chip conveyor type 280 S-1/160, a DELTATHERM cooling unit type RKV 5.5, a KUKA handling robot of the Industrial Robot Cybertec-2 series with a corresponding KUKA robot control unit type KR C5 Dualcap AC, a KNOLL coolant filter unit type KF 150/950, and an air filter unit type AFS 1100.

Condition: used, Year of construction: 2010, operating hours: 29,870 h, functionality: fully functional, machine/vehicle number: 8045000191A, DMG CTX 510 eco – CNC Universal Slant-Bed Lathe Manufacturer: DMG (Gildemeister / DMG MORI Group) Model: CTX 510 eco (Ecoline Series) Year of Manufacture: 2010 Control Unit: Siemens Overview The DMG CTX 510 eco is a robust and powerful universal CNC lathe designed for heavy-duty turning and precision machining. Featuring a high-torque spindle and a 45° slant-bed design for excellent chip flow and thermal stability, this machine is ideal for both small batches and production runs. Key Technical Specifications Max. Swing Diameter: 680 mm Max. Turning Diameter: 465 mm Max. Turning Length (Z-axis): 1,050 mm Spindle Speed: 3,250 RPM Main Spindle Power: 33 kW (40% DC) / 22 kW (100% DC) Spindle Torque: 630 Nm (High torque for heavy cutting) Bar Capacity: 76 mm Rapid Traverse (X/Z): 30 m/min Turret & Tooling Number of Tool Stations: 12-position turret Tool Holder Type: VDI 40 Fsdpfxey D Il Ao Af Sjgd Driven Tools (C-Axis): Equipped with C-Axis and milling capability for 3-axis machining. Included Equipment & Features Steady Rest ,Tailstock,Chip Conveyor Coolant System: High-pressure pump and tank. Physical Dimensions Weight: Approx. 7,800 kg Footprint: Approx. 4.5m x 2.4m x 2.0m Condition Well-maintained machine from a professional environment. Original DMG signature build from the FAMOT factory. Available for inspection

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Fgsdpfx Aeyxxhqjf Sjd

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Manufacturer: GSD Tank rotating device for welding pipes and tanks Year of manufacture: 2012 Load capacity of the rotating device: 40 tons Rotation speed: 0 to 3.2 m/min Tank diameter: 500 - 7000 mm Roller spacing: 200 to 1750 mm Roller center distance: 600 to 2150 mm Roller diameter: 400 mm Roller width: 480 mm Motor power: 2 x 1.5 kW Mains connection: 400 volts, 50 Hz - Variable speed control via SEW frequency inverter - Cable remote control - Clockwise and counterclockwise rotation Fgedpfxozgx A Ie Af Sjd - Both roller pairs are driven - Rollers with 5 rubber tires each - Manual adjustment of the roller spacing via trapezoidal screw spindle - Railcar DEMAG, steel castors with smooth roller surface (without drive) Space requirement L x W x H: 4000 x 1850 x 1150 mm Own weight: 4.5 t Good condition

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Fgodpfx Afody Hqvs Sed Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding Fsdpfx Aob Tmrvof Segd 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Fgodpedzc Rfjfx Af Sjd Optional side and end stops for floor cassette assembly

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,597 h, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: Smart, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This Mazak Quick Turn Smart 200 features a 12-position turret and is equipped with a Hainbuch chuck, enhancing its versatility. It has a bar capacity of 65 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 200 machine we have for sale. Contact us for further details. • Supply Voltage: 3 Phase, 400 V, 50 Hz Fgodpfx Afszhbqks Sed • Control Circuit Voltage: AC100 V / DC24 V • Main Breaker Interrupting Capacity: 20 kA • Supply Voltage (Ue): 400 V, 3~ • Rated Current (Ie): 3.5 A • Frequency: 50 Hz • Weight Barfeeder: 500 kg • Breaking Capacity (Icn): 5 kA • Control: Mazatrol Smart • Turret: 12-Position • Bar Capacity: 65 mm • Hainbuch Chuck (Standard Chuck Also Included) • Optional, not included: IEMCA KID 80 Bar Feeder (2012) Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft * Fjdpow Dufiofx Af Sogd

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Fgedpfswbz Tusx Af Ssd

Condition: good (used), Year of construction: 2007, operating hours: 30,395 h, turning length: 600 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, Counter spindle: 6,000 rpm, C-axis Fgsdpfx Afjzf Hqks Sjd Turret: 12 stations Siemens 840D Powerline Counter spindle Y-axis Chip conveyor C-axis Driven tools Bar feeder

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 181174, operating hours: 5,600 h, 5 axis simultaneously and 5 axis free form - CAP Tool system! Accumulated time: Power on: 2026:04'40" Auto open: 1323:07'43" Auto cut: 669:16'50" Total cut: 5606:49'54" Total time: 2028:04'40" Bought new from Mazak factory. Excellent and working condition. Comes with different machining tools. You're welcome to test and see the machine. Year of manufacture: 10-2005 - Max. Schwingdurchmesser …………….…… Ø660 mm - Max.Bearbeitungsdurchmesser ( oberer / unterer revolver ) ………..Ø660 mm / Ø270 mm - Max. Bearbeitungslange ……………....…1016 mm - X – Achsen Verfahrweg ( oberer revolver ) ……………...………….580 mm - X2 – Achsen Verfahrweg ( unterer revolver ) …………….150 mm - Z – Achsen Verfahrweg ( oberer revolver ) …………….....…..1045 mm - Z2 – Achsen Verfahrweg ( unterer revolver ) …………….….990 mm - B – Achsen Verfahrweg ………….…………….….225° - C – Achsen Verfahrweg ………….…………….360° - Spannfuttergrose ……………... 8 “ - Hauptspindeldrehzahl ……………..….5000 o / min - Hauptspindelbohrung ……………...……………. Ø51 mm - Min. Hauptspindelindexierung ……………..………… 0.0001 ° - Spannfuttergrose 2. spindel ……………..………….. 8 “ - Drehzahl der 2. spindel …………….…5000 o / min - Verfahrweg des 2. spindelstocks ( W – Achsen ) ……………..…….. 1050 mm - Eilganggeschwindigkeit des 2. spindelstocks ( W – Achsen ) …….. 30000 mm / min - Min. Indexierung der 2. spindel …………… 0.001 ° - Revolvertyp ( oberer )…………… mit ATC - Werkzeugschafthohe ( oberer )……………..….. 25 mm - Bohrstangenschaftdurchmesser ……………..….. Ø40 mm - Revolvertyp ( unterer )…………….…… trommelrevolver mit 9 stationen - Werkzeuganzahl …………….….. 9 Werkzeuge - Werkzeugschafthohe ( unterer )…………….…….. 25 mm - Bohrstangenschaftdurchmesser …………….... Ø32 mm - Revolverschaltzeit ( unterer )……………. 0.14 s / 1 schaltschritt - Frasspindeldrehzahl …………….. 12000 o / min - Bearbeitungskapazitat der frasspindel ……………. Frasen : Ø100 mm , schaftfrasen : Ø32 mm , Bohren : Ø30 mm , Gewindebohren : M27 -: X – Achsen ( oberer ) …………… 38000 mm / min : X 2– Achsen ( unterer ) ………….…… 38000 mm / min - : Y – Achsen …………… 26000 mm / min -: Z – Achsen ( oberer ) …………….… 38000 mm / min -: Z2 – Achsen ( unterer ) ……………..… 38000 mm / min - Eilganggeschwindigkeit : C – Achsen …………….… 400 o / min - Tippvorschubgeschwindigkeit : X – Achsen ( oberer ) ……….…… 2000 mm / min - Tippvorschubgeschwindigkeit : X2 – Achsen ( unterer ) ………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Y – Achsen ( oberer ) ………….… 2000 mm / min - Tippvorschubgeschwindigkeit : Z – Achsen ( oberer ) …………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Z2 – Achsen ( oberer ) …………… 2000 mm / min - Tippvorschubgeschwindigkeit : C – Achsen …………….… 2000 ° / min - Werkzeugschaft / Werkzeugaufnahmekapazitat …………….. CAPTO C6 No 20 Werkzeuge - Max. Werkzeugdurchmesser …………….. Ø90 mm (Ø125 mm bei freien Nebenplatzen ) 300 mm / 10 kg - Werkzeugwechselzeit ( werkzeug-zu-werkzeug ) …………….. 1.3 s - Hauptspindelmotor ( 30 min -/Dauerbetrieb ) ……………..AC 22 kW / AC 15 kW - Motor der 2. spindel ( 30 min -/Dauerbetrieb ) ……………....AC 18.5 kW / AC 15 kW - Frasspindelmotor ( 20 % ED ) ……………. AC 15 kW - Kuhlmittelpumpenmotor ……………1.2 kW - Leistungsaufnahme (Dauerbetrieb ) …………….….. 66.0 kVA - Druckluftanschluss ……………..…..5 bar , 500 l / min - Kuhlmittel frassungsvermogen des Tanks ……………..….. 300 l - Maschinenhohe ……………..……..2597 mm - Aufstel Fgedpfx Afed H Eryj Ssd

Condition: new, weight max. 1000 kg workpiece diameter Ø 80 - 700 mm table turning speeds 80 - 1600 mm/min. roll diameter Ø 250 x 50 mm voltage 230 V / 50 Hz range L-W-H 500 x 300 x 384 mm Antrieb weight 85.0 kg Fgedpfxjzhcgte Af Sod range L-W-H 500 x 160 x 384 mm Mitläufer Description: - Device for rotating and positioning containers and cylindrical workpieces - Unit constructed of solid steel with polyurethane-coated metal rollers - Stepless speed control with DC drive system - Rotary knob for continuously adjustable rotation speed - Switch for clockwise/counterclockwise rotation - Foot switch for start/stop, - High-frequency protection Scope of delivery: - 1x drive unit with integrated control system - 1x rotating unit

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Fjdjzkvkqopfx Af Ssgd

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,794 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, overall weight: 4,380 kg, controller manufacturer: MAZATROL, controller model: Matrix NEXUS, number of axes: 2, Horizontal turning machine manufactured in 2007. This Mazak QUICK TURN NEXUS 200-II features a maximum turning diameter of Ø 350 mm and a turning length of 550 mm. It is equipped with a chuck size of 200 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200-II machine we have for sale. Contact us for further details. • Control: Mazatrol Matrix NEXUS • Chuck Size: 200 mm (8") • Maximum Turning Diameter: Ø 350 mm • Maximum Turning Length: 550 mm • Machine Weight: 4,380 kg • Tool Eye (Tool Setter): Yes • Coolant System: Currently not functional (coolant/water cannot be added) • Additional optional Accessories: Chip Conveyor, various clamping jaws included • Machine On Hours: 24,079 h • Spindle Hours: 8,794 h Technical Specification Counter Spindle Yes Fjdpfx Afozg Dz Ao Ssgd Driven Tools No

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW Fodpfx Afjzi Uk He Segd - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Coolant system 980 liters with belt filter Conveyor belt Oil mist separator Chip conveyor without bar feeder Fedey Ivyiopfx Af Segd

Condition: good (used), Year of construction: 2015, Main and counter spindle 3 turrets Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Fgsdpfx Ajyx Tk Tef Sod Bar feeder FMB Turbo 2-20

Condition: like new (used), Year of construction: 2024, MAZAK QUICK TURN 200 MSY Max. machining diameter: 380 mm Max. machining length: 575 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control: Mazatrol SmoothG -Hydr. KITAGAWA 3-jaw chuck BB-208 for main spindle, diameter 210 mm -Hydr. KITAGAWA 3-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001° - Y-axis Fodpfxezgw Icj Af Ssgd - Interface for bar feeder - Autom. parts catcher - Robot interface - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar Fgjdpjvllbrsfx Af Ssd All manuals and documentation available

Condition: good (used), Year of construction: 2021, Parts shown by hand not come. Fjdpfjzgpadsx Af Segd Technical details are shown on picture.