Used Universal Cnc Milling Machine for sale (66,843)

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible. Gsdpfx Aksw Edptoasug

Condition: good (used), Internal article no.: 26031 Universal milling machine Deckel FP1 Infinitely variable feed + Various SK40 tool holders + Collet set (S20x2) + Hydraulic machine vice Röhm 110 The servomotor has been overhauled! Travel: X300 / Y160 / Z340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Gjdpfjyqx S Eex Akajug Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min The machine is fully functional and can be inspected under power, by appointment, in a heated storage area of over 500 m².

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 Gujdjw Tnhbjpfx Akaog WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 24689 [h] - Number of working hours : 23809 [h] - Number of spindle hours : 7658 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming - Coolant tank - Tool-holders

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC 800x800 pallet 3.000 kg max table load Gusdpszlqw Ijfx Akaog Signal light 40 bar Internal coolant Touch probe Machine will be in stock in 2 weeks

Condition: new, Year of construction: 2026, Universal Milling Machine UWF120 SERVO with Independent Spindle Drive: Exceptional Machining Flexibility Our Universal Milling Machine UWF120 SERVO is an innovative solution for a wide range of milling operations. Servo motors on the X, Y, and Z axes, along with an independent vertical spindle drive, enable precise milling at various angles. The handwheel for accurate tool positioning and smooth movement makes operation intuitive and efficient. Its solid and heavy-duty construction ensures stability even during demanding machining tasks, while guaranteeing long-lasting machine life. Machine characteristics The cast-iron body ensures vibration-free operation, contributing to high machining accuracy. Protective covers in accordance with the latest safety standards ensure safe operation. Schneider Electric electronics and SERVO drives guarantee not only machining precision but also operational safety. The digital display and ergonomic control panel make the milling machine easy and intuitive to operate. Technical data Maximum face milling cutter diameter 25 mm Table dimensions 1500x320 mm Table travel X/Y/Z 1000/320/340 mm Distance from spindle face to table 90–430 mm Distance from horizontal spindle axis to table –130 to 300 mm Distance from spindle axis to column 400–800 mm T-slot width, spacing, and number 14 mm / 70 mm / 3 pcs Spindle speeds 45–1660 (V–11) rpm 34–1320 (H–12) rpm Table feed 25–595 mm/min (8) Spindle taper ISO40 Supply voltage 400V Motor power 2.2kW (V); 3kW (H) Weight 2,100kg Overall dimensions (LxWxH) 1630x1700x1950 mm Standard equipment: Gsdpszfgf Usfx Akaeug 3-axis digital readout Servo drive ISO40 toolholder with ER32 collets 4, 5, 6, 8, 12, 14, 16 Reduction sleeve ISO40/MK4 Reduction sleeve ISO40/B16 Drill chuck 3–16 mm B16 Vice 160 Lighting Cooling system Central lubrication system Feed for X, Y, Z axes Tool set User manual CE Declaration of Conformity

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. Gusdpfx Akozvduujasg The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Year of construction: 2019, condition: ready for operation (used), Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible. Gujdpfsuk I Eyex Akajg

Condition: good (used), Year of construction: 1968, Storage location: 2908 Manufacturer: CUGIR, Romania Year of manufacture: 1968 Machine number: 3266 Type/Model: FU-1 Travel ranges x-y-z: 700 - 370 - 250 mm Table: 1,250 x 320 mm Spindle speed range: 30 to 1,500 rpm Spindle mounting: SK 50 Godpfevc D Apex Akajug Feeds: Rapid traverse: Connection: 7.5 kW Accessories/Equipment: Condition: good Weight: approx. 2.5 t Dimensions: 2,000 x 2,000 x 1,700 mm

Condition: ready for operation (used), A Ho Chun universal tool milling machine is available. Travel X/Y/Z: 1250mm/540mm/470mm, spindle mount: NT#50, speed: 2000rpm, table spindle nose distance: 50mm-520mm, spindle power: 8kW, feed: 1200mm/min, rapid traverse: 2000mm/min, table dimensions X/Y: 1800mm/400mm, max. table load: 1000kg, machine weight: approx. 3600kg. Documentation available. On-site inspection is possible. Guodpfx Asx Hwn Eskajg

Year of construction: 1970, condition: ready for operation (used), A conventional universal milling machine Malick & Walkows is available. Table dimensions X/Y: 1000mm/300mm, speed: 1120rpm, travel X/Y/Z: 900mm/300mm/500mm, quill stroke: 80mm, feed rate: 250mm/min, machine dimensions X/Y/Z: approx. 1700mm/1900mm/1700mm, weight: approx. 1750kg. Including machine vise and accessories. An on-site inspection is possible. Guedpfxozdumwj Akaeg

Year of construction: 2009, condition: ready for operation (used), A Primacon CNC high-precision vertical machining center for machining small workpieces in the medical sector is available. Axis travels X/Y/Z: 240mm/240mm/240mm, table dimensions X/Y: 350mm/300mm, max. table load: 60kg, spindle speed: 40000rpm, tool holder: HSK-25, feed rate: 12m/min, rapid traverse: 12m/min, positioning accuracy: +/-0.001mm, repeatability: +/-0.0005mm. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/2200mm, weight: approx. 1000kg, control: Heidenhain. The spindle is occasionally not clamped correctly during the tool change process. The ventilation hose of the Z-axis rubs against the A-axis block. Documentation available. An on-site inspection is possible. Guedpfxszq Eb Se Akajg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), number of axes: 3, overall weight: 880 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Any shape or form may be cut, engraved, or 3D milled using this universal CNC router. The Wattsan M1 6090 can create décor, furniture, advertising, and packaging. This machine is compatible with several materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. The working table of the Wattsan M1 6090 is 600x900x200 mm. A 2.2 kW spindle and a T-slot table are part of its basic design. Compared to the A1 6090 model, the processing depth may be increased by 20% in a single pass thanks to the 300 mm portal height. Guodpfx Aorvh Ebjkasg You can give our managers a call for additional details! Wattsan M1 6090 characteristics Working area: 600x900 mm Spindle: 2.2 kW Machine size: 1380 x 1500 x 1890 mm Weight: 400 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device Gujdpszzw Nisfx Akasg * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Gsdpfx Akswtnxnsasug Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Guedou Dahnopfx Akasg Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Gjdpfx Akjw Nklhsajug Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: ready for operation (used), A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible. Gusdoycwq Dspfx Akasg

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, quill travel distance: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 1,900 mm, total width: 2,200 mm, total length: 2,600 mm, table width: 320 mm, table length: 650 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 20 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, Technical Data: 1. Working Area & Travel Ranges X-axis: 500 mm Y-axis: 400 mm Z-axis: 300 mm Quill stroke: 80 mm / 100 mm (manual/hydraulic) 2. Spindle Tool holder: SK 40 / ISO 40 Tool clamping: Hydraulic (quick-change system) Speed range: continuously variable from 20 to 4,000 rpm Milling head swivel range: ± 90° 3. Feeds & Drive Feed range: continuously adjustable from 1 to 3,000 mm/min Rapid traverse speed: approx. 4 to 6 m/min Spindle drive power: approx. 5 kW Total connected load: 12 kW to 24 kVA 4. Control & Electrical System Standard CNC control: Philips CNC 432 3D path control with graphics display, very popular for workshop programming with standard cycles such as circular pockets, groove milling, and drilling cycles Measuring system: Direct optoelectronic length measuring system, Heidenhain scales in all three axes 5. Table Options NC rotary table: approx. 650 x 320 mm Gujdpfx Akezl An Seaeg 6. Dimensions & Weight Machine weight: 2,000 kg Footprint (L x W x H): approx. 2.6 m x 2.2 m x 1.9 m Transportation and loading can be arranged upon request for an additional charge, throughout Europe. Prices plus VAT Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Gsdpfjl Dvx Esx Akaoug Equipped with: Vice 19 tool holders Coolant

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Gusdpfx Akowwt Nmoaeg Spindle speed: 10,000 rpm Weight: approx. 20 tons 9926ä

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Gedpfx Akoy N Du Djajug Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Year of construction: 1989, Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Guodpfxszy Rddo Akajg Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

Condition: new, Year of construction: 2026, C6090 milling plotters are professional precision devices designed for small-sized processing of materials such as: wooden materials, chipboard, plywood, MDF, OSB, or PVC plastics, plexiglass, dibond, light metals. Training at CORMAK headquarters included in the price for each machine. Optional - the latest UCanCAM V13 software in Polish language version Drive Motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. In the X and Y axes, high-quality toothed bars work, praised by users, which ensure high durability and precision, The Z axis is driven by a high-quality ball screw. All axes move on rail guides. The machine is equipped with a drive height sensor Spindle Brushless high-class spindle, which is characterized by durability. Liquid cooling system The spindle design uses high-quality machine bearings, characterized by very quiet operation and ensuring increased durability. Tool height measurement sensor - included. The spindle speed range is from 6000 to 24000 rpm. Software OPTIONALLY The latest UCanCAM V13 software in the Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software allows for quick and easy design of elements, which the program then converts to the so-called G-code. It is also possible to import ready-made files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a power failure or interruption, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing The DSP controller of the machine has its own processor and RAM, which ensures trouble-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. After a power loss, there is no need to initialize the program from scratch. The memory built into the controller allows the machine to work without having to load the program every time. Technical parameters Spindle 2.2kW / 3.0kW / s1 / s6 24000 rpm. inverter Workspace 600x900x300 mm DSP control Program resolution 0.001 mm Power supply 230V Weight 310 kg Machine dimensions width 1370x length 1720x height 2050 mm Table height 750 mm Linear guides Drive transmission toothed rack (Z axis - ball screw) Axis drives stepper motors UCanCAM V13 software in Polish language version (option) Equipment leveling feet, screws, keys, training cutter package, ER32 collets - 1/8 inch, 1/2 inch, and 5-6 mm Gsdpfjwcd Tmjx Akasug Unloading and machine location on the customer's side. Power plug on the customer's side due to different sockets 16A / 32A Price is only for machine itself

Condition: new, Year of construction: 2026, Universal milling machine with a swivelling head in 3 axes A universal milling machine with a 3-axis swivelling head, offering a wide range of technological capabilities, making it suitable for both single-piece and serial production. The machine is equipped with stepless spindle speed adjustment, hardened guideways, and a central lubrication system for the guideways. The milling machine is available immediately from stock. Machine description Three-axis swivelling head: Tilt ±90° (right and left) Inclination ±45° (front and rear) Horizontal rotation 180° Trapezoidal hardened guideways Spindle speed adjustment via control knob Digital readout for 3 axes included as standard Gsdpfx Akovugb Eeaeug Technical specifications Parameter Value Maximum drilling diameter 50 mm Maximum horizontal milling width 80 mm Maximum vertical milling width 25 mm Spindle taper ISO40 Number of spindle speeds (vertical / horizontal) 16 / 12 Spindle speed range (vertical / horizontal) 80–5440 / 34–1320 rpm Distance from spindle axis to column surface 210–735 mm Distance from spindle to table surface 95–375 mm Distance from horizontal spindle axis to table 0–255 mm Vertical spindle quill travel 120 mm Table dimensions 1370 × 320 mm Table travel 750 × 320 mm Motor power (vertical / horizontal) 2.2 / 2.2 kW Weight 1500 kg

Condition: used, x-travel 315 mm y-travel 180 mm z-travel 320 mm 5 14 mm ISO 40 DIN 2079 45 - 1950 U/min flute distance 10 - 170 mm/min no. of flutes 4 m/min total power requirement 5,1 kW distance between table/spindle 1400 kg diameter of rotary table 3000 x 2700 x 1800 mm - Robust/powerful universal milling machine - HEIDENHAIN digital display Guedexwdvhspfx Akasg - Coolant device