Used Vdf Due Lathe for sale (8,345)

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm Gksdszpwwpepfx Ap Doc DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1997, condition: used, Specification Gkjdpfx Aezw D I Rjp Doc Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, turning diameter: 840 mm, feed length Z-axis: 6,000 mm, bed width: 560 mm, Turning diameter in gap: 1,040 mm, VDF Heidenreich & Harbeck Gildemeister M820x6000 Machine prfessionally refurbished, inspected and tested, very good working condition. BASIC TECHNICAL PARAMETERS: Swing over bed: Ø 840 mm Swing over cross slide: Ø 520 Swing in the gap: Ø 1040 mm Length of gap: 390 mm Gkedpfeuq A Icsx Ap Doc Distance between centres: 6000 mm Width of bed: 560 mm EQUIPMENT INCLUDED INTO THE PRICE: Digital readout Sony for X and Z axis Central lubrication system for logitudinal support Safety guard on chuck, tool post and rear cover on support Ligtening, cooling pump and emergency stop button ADDITIONAL EQUIPMENT: Steady rest range 20-300 mm 4-jaw turning chuck Ø 800 mm Machine located in central Poland, ready for checking. Perfect condition.

Condition: used, Year of construction: 1983, Boehringer DUE 500 lead and feed spindle lathe Condition: Used, geometrically overhauled in 2026 Year of manufacture: 1983 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked and adjusted. A test report according to DIN 8605 is available. During the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data: Center height: 250 mm Distance between centers: 1300 mm Spindle bore: 62 mm Chuck diameter: 300 mm Spindle speed: 2240 min-1 Motor power: 11 kW Space requirement approx.: 4000 x 1525 mm Weight approx.: 4300 kg Equipment: 3-axis digital display, NEW Coolant system Chuck guard with microswitch Gksdpfx Ajz A Tt Dep Dsc Emergency stop Roller guard Machine light Geometry report Inquiry item: Transportation costs will be provided in an individual offer.

Condition: good (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 3,000 mm, total length: 4,000 mm, overall weight: 8,000 kg, The machine is coming from maintenance and is accompanied by a large amount of accessories. Gedpfez Iif Hsx Ap Djkc

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 power capacity - main spindel 53 kW spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm Gkedpfx Apjz Hmwko Dec power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 11 t dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Must move in short time

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Gkedpfx Apjz Rnrrs Dec Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control system: Siemens Sinumerik 840 Year of manufacture: 2014 Internal machine no.: 57 Turning length: 1,000 mm Turning diameter over bed / cross slide: 420 / 235 mm Cross slide travel: 250 mm Max. speed: 10 – 3,000 rpm Accessories - Steady rest - Extraction unit - 3-jaw chuck Schunk 250-62 - Tool holder Gksdpjy R Rl Eefx Ap Doc

Condition: excellent (used), Year of construction: 1985, Control: Philips B2T Swinging diameter: 640 mm Machining diameter, longitudinal: 550 mm Machining diameter on the turret: 450 mm Turning length: 1000 mm Spindle speed: 2,240 rpm Spindle bore: 103 mm Gjdpfx Apezpy Rrs Dskc 12-position turret, VDI 60 Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 57 mm, swing diameter over cross slide: 365 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, bed width: 360 mm, total length: 5,000 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 1,600 kg, travel distance cross slide: 345 mm, overall weight: 5,000 kg, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, The VDF Boehringer DUS 560 Ti is, in terms of turning diameter, the most popular teach-in lathe from VDF Boehringer. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency for single-piece and small batch production. This machine is currently set up in our showroom and can be viewed on site! Comes as standard with: - Original documentation - Set of tool holders + drill chuck - Fixed steady rest - 3-jaw Forkardt 315-F Ø315mm chuck Gkjdpfx Asyvuhzop Djc Weight & dimensions: - 5,500 kg - 5,000 x 2,100 x 2,000 mm (LxWxH) For all specifications of this machine, please see the last images!

Condition: used, Year of construction: 1996, turning diameter 250 mm turning length 1000 mm Control Philips CNC-Steuerung weight of the machine ca. 8 t PHILIPS CNC control Gedpfx Apjyan R Aj Djkc X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is probably the best German-made lathe in its class ever built. BOHEHRINGER precision lathe, model DUE 630 Year of manufacture: 1991 Serial number: 1032.1239-08 Center height: 320 mm Swing diameter over bed: 640 mm Distance between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 82 mm Spindle head: DIN 55022, size 8 Drive power: 24 kW Max. torque: 2,000 Nm Gkedpfezlm Ucjx Ap Doc 24 speeds: 9 – 1,800 rpm 60 cross feed rates: 0.03 – 28 mm/rev 60 longitudinal feed rates: 0.06 – 56 mm/rev Footprint: L x W approx. 4,000 x 1,525 mm Weight: approx. 4,500 kg Accessories: - 3-axis digital display HEIDENHAIN - Parat tool holder including 4 holders - Coolant system - Chip guard back panel - 3-jaw chuck T 315 mm including jaws - Roller strip cover for lead screw support to the bed - Machine light - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine has been completely technically inspected and can be inspected under power if desired. The gearbox runs very well. The bed guides are also in good condition.

Condition: used, total length: 3,350 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Blue Gsdpfxsy Nk N Uo Ap Dekc Empty weight: 2.200 kg - Drive system: Conventional - Centre height [mm]: 240 - Swing over bed [mm]: 480 - Carriage turning diameter [mm]: 260 - Distance between centres [mm]: 1500 - Bed width [mm]: 370 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 18 - Max. spindle speed [rpm]: 900 - Options: Removable bed, Quick-change tool post, Three-jaw chuck - Swing over removable bed [mm]: 740 - Transport dimensions: 3350mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, CNC lathe, cycle-controlled Manufacturer: VDF Boehringer Type: DUS 560 Year of manufacture: 1997 Control: CNC Plus Swing diameter over bed, max.: 570 mm Turning length: 1,000 mm Spindle head, size 8 according to DIN 55027 Gkjdpfx Ajz N Ew Njp Djc Toolholder cross-section H/W, max.: 32 x 25 mm Thread pitch: 0.1 – 400 mm Spindle speed: Gear stage 1: Speed range from 3 to 500, stepless Gear stage 2: Speed range from 15 to 2,500, stepless Speed: Main drive: 8,000 min⁻¹ Feed drive X: 2,000 min⁻¹ Feed drive Z: 2,000 min⁻¹ Tailstock: Arbor taper: MK 5 Tailstock travel, manual Feed rate: longitudinal, max.: 10 m/min radial, max.: 5 m/min automatic feeds: longitudinal + radial 0.01 – 50 Feed force, max.: longitudinal 12.5 kN Main drive: 50/21 kW Voltage: 400 V / 50 Hz Total connected load: 50 kVA Accessories: Coolant pump Brinkmann, 47 l/min at 0.2 bar Manual chuck Forkardt F 250 Parat quick-change tool holder Weight approx.: 4,000 kg Space requirement L/W/H: 3,150 x 1,800 x 1,800 mm 121026ä

Condition: used, Year of construction: 2005, total length: 3,600 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti Year of manufacture: 2005 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Gjdpfszwbxyex Ap Dokc Was in production until approximately 3 months ago. I own this lathe from 2005, as well as a DUS 560 ti from 2004 with chip conveyor, and a DUS 400 ti from 2004. All three machines come from the same factory and were in use together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also own several chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: ready for operation (used), Year of construction: 1993, turning length: 1,900 mm, turning diameter: 700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 25 rpm, rotational speed (min.): 25 rpm, rotational speed (max.): 4,000 rpm, total height: 2,520 mm, total length: 9,000 mm, total width: 4,100 mm, overall weight: 21,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, -Turning length: 1900 mm -Maximum workpiece diameter over the bed: 700 mm -Spindle head A11 DIN 55026 -Tool system: 2 x 12 pieces -Tool holders according to DIN 69880, diameter 50 mm Gksdeztr N Ijpfx Ap Dsc -Automatic door sliding mechanism -Tailstock prepared for diameters of 80 mm - 262 mm -Pressure booster pump

Condition: used, Year of construction: 1984, serial number 1113-23 turning length 500 mm turning diameter 220 mm Gkodpfx Apevxltus Dsc chip conveyor ja kW Werkzeugwechsler 12-fach spindle turning speed range 5000 U/min tail stock automatisch

Condition: used, Year of construction: 2004, total length: 4,200 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti With chip conveyor Year of manufacture: 2004 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this 2004 lathe with chip conveyor, as well as a DUS 560 ti from 2005 and a DUS 400 ti from 2004. All three machines originate from the same factory and were used together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have some collet chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Gkjdpfx Apszwbx To Dsc Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm Gkjdpfx Apjz Apc Re Dsc MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: used, Year of construction: 2004, total length: 3,400 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 3,000 kg, VDF DUS 400 ti Year of manufacture: 2004 FORKARDT F+250 Previously used in the training department of a gear factory. Was in production until approximately 3 months ago. I own this lathe from 2004, as well as a DUS 560 ti from 2004 with a chip conveyor, and a DUS 560 ti from 2005. All three machines come from the same factory and were used together until they were dismantled in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have several chucks for the FORKARDT centering chuck. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged. Gedszwbyqjpfx Ap Dskc

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Gksdpoxz Edzsfx Ap Doc

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck Gksdpfx Apswwkx Es Dsc  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Year of construction: 1991, condition: used, Offered for sale is a robust universal CNC lathe. Turning length: 3000mm, max. torque: 2240Nm, spindle speed range: 16-2500rpm, feed rate: 0.001-9999.999mm/min, rapid traverse rate: 10000mm/min, feed force: 15kN, tailstock quill force: max. 15kN, control: FANUC 15 TF. Equipped with hydraulic tailstock, drum turret, steady rest (range 72-220mm and 28-120mm), various spare parts, defects: machine bed worn, X-axis bearing arrangement makes noise. Weight: approx. 8500kg, overall dimensions X/Y/Z: approx. 6500mm/2200mm/2000mm. Inspection possible by appointment. Gkedpfezzdx Rsx Ap Dsc

Condition: ready for operation (used), Year of construction: 1971, functionality: limited functionality, turning length: 2,000 mm, turning diameter: 680 mm, Hello, I am selling a conventional lathe made by VDF. Maximum turning diameter: 680 mm Distance between centers: 2000 mm Gkjdpjzwnprjfx Ap Doc This machine is still very well suited for finishing operations, such as re-machining sealing surfaces, etc. Only the machine itself is being sold. If you are interested, please do not hesitate to contact me!

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg Gjdevzn Itspfx Ap Dekc