Used Vdf Due Lathe for sale (8,319)

Condition: used, Year of construction: 1999, functionality: fully functional, machine with 65mm bar passage C-axis with double turret (upper turret motorized) tailstock bar feeder interface FANUC CNC Hsdpsz Hn A Uofx Ag Ssfn year 1999 CE standards complete with manuals and tool holder set. Spindle Speed 0-4,000 rpm Spindle Diameter 200 mm (160 mm) X-axis Travel 235 (195+40) mm Z-axis Travel 500 mm Maximum Turning Diameter over Bed 680 mm C-axis 0.01° Turret 12 + 8 Tools Rapid Traverse X 18 m/min Z 24 m/min Number of Tools 12 M + 8 Motorized Tools YES on the upper turret Tool Change Time 0.7 sec Machine Weight 6,500 kg Dimensions (length x width x height) 4000 x 2200 x 2300h

Condition: used, Year of construction: 1984, functionality: fully functional, overall weight: 2,300 kg, We offer this used Prvomajska BRT50M turret lathe, manufactured in 1984. It is in good working condition. Hsdpfsz Hma Ejx Ag Sofn If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2007, functionality: fully functional, • WEMAS TURN 400-52 • Year of manufacture: 2007 Hfodpfx Aoz Ip Nfeg Ssn • Control system: FANUC 0i-TC • Programming system: Manual Guide • Max. turning diameter: Ø 484 mm • Max. turning length: 750 mm • Spindle bore: Ø 70 mm • Rapid traverse: 24 m/min • Tool turret: VDI 30 • Hydraulic chuck • Hydraulic quick-change turret Chip conveyor

Condition: excellent (used), Year of construction: 2024, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL MACH-ID 9822 Make: QuickTech Type: T6 MILL Control: Mitsubishi Touch YOP: 2024 Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Pinole taper: 4Mk Stroke pinole: 70mm Hsdpfxjz H I Hae Ag Sofn Quill Ø: 32mm Length: 2500mm Width: 1300mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Mechanic lathe LESTO Scintilla (Switzerland), model GD 1124 CR Machine no. 6T 7868, year of manufacture approx. 1975 Electrical problems with the capacitor motor Drive power: 0.44 kW Mains connection: 230 volts, 50 Hz - Fixed steady rest - Collets - Faceplate Space required L x W x H: 1100 x 500 x 400 mm Weight: approx. 90 kg Hfjdpfx Agez Ek Rxo Sjn Good condition - Electrical problems with the capacitor motor

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Parts shown by hand not come. Hedoz Egxfspfx Ag Ssfn

Condition: used, total length: 3,700 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.500 kg Hfedpfez Et Uasx Ag Sen - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 2000 - Bed width [mm]: 385 - Spindle bore [mm]: 73 - Min. spindle speed [rpm]: 26 - Max. spindle speed [rpm]: 1100 - Options: Fixed steady, Removable bed, Three-jaw chuck, Travelling steady - Swing over removable bed [mm]: 750 - Transport dimensions: 3700mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS Hfsdjq H Tr Tepfx Ag Son CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT ; USB PORT

Condition: good (used), Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OMAP, Lead screw and feed screw lathe type 180 -Turning length: 1600 mm -Turning diameter over bed: 410 mm -Turning diameter without bed: 570 mm -Turning diameter over support: 230 mm -Spindle bore: Ø 53 mm -Spindle speeds: 12 - 1650 rpm -Three-jaw chuck: Röhm Ø 250 mm -Tailstock mount: MK3 Hsdpfx Aez D Tt Heg Sjfn -Drive: 2.2 kW -Accessories included, see photos -Dimensions: 2670/900/H1355 mm -Weight: 1460 kg

Condition: excellent (used), Year of construction: 2006, turning diameter: 250 mm, spindle bore: 90 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 320 mm, spindle motor power: 11 W, type of input current: three-phase, overall weight: 4,600 kg, Equipment: documentation/manual, HYUNDAI-KIA SKT 21 VM CNC VERTICAL LATHE CNC vertical turning center with an inverted spindle, C-axis, and driven tools. Technical data: Manufacturer: Hyundai-Kia Model: SKT 21 VM Machine type: CNC vertical lathe / vertical turning center CNC control: FANUC Max. turning diameter: approx. 250 mm Max. workpiece diameter: approx. 350 mm Chuck size: 8" Spindle nose: ASA 6 Spindle speed: up to 5,000 rpm Spindle motor power: 11 kW Spindle bore: approx. 90 mm Tool turret: 12 tool stations VDI 40 tooling system Driven tools C-axis Axis travel: X-axis travel: approx. 1,255 mm Z-axis travel: approx. 320 mm Rapid traverse: approx. 30 m/min Machine equipped with: C-axis driven tools 12-position tool turret hydraulic chuck coolant system chip conveyor Hfedpfx Aozzvmmsg Ssn FANUC CNC control

Condition: good (used), Year of construction: 2012, HAAS ST-30 CNC lathe with C-axis and driven tools Hodpfxozz Agto Ag Sjfn Year: 2012 Technical details: Swing diameter 806mm, Maximum cutting diameter 533mm, Distance between centres 762 mm Maximum cutting length 660 mm Bar capacity 76 mm Spindle Motor 22,4 kW Max spindle speed 3400 rpm C-axis and driven tools Turret 12 positions Tailstock Accessories/options: 1 axial driven tool holder 1 radial driven tool holder 10 pieces static tool holders Tool presetter, Renishaw Foot pedal for chuck and tailstock operating Coolant tank Swarf conveyor Under power in our warehouse.

Condition: used, Year of construction: 2014, operating hours: 460 h, functionality: fully functional, For sale: a professional vertical CNC machining center, HYUNDAI WIA F400, manufactured in 2014. The machine is in exceptionally good technical and visual condition, having been used for only approximately 460 operating hours. Machines in this condition are rarely found on the used equipment market. Throughout its operational life, the machine has been regularly maintained. Even when not in use, it was started up every week, the spindle was rotated, and all axes were moved, ensuring that all mechanisms remained in excellent condition. The machine is connected and ready for inspection and testing. Key Information: Manufacturer: HYUNDAI WIA Model: F400 Year of Manufacture: 2014.05 Made in: South Korea Technical Specifications: Controller: FANUC Series 32i-Model A Maximum Spindle Speed: 12,000 rpm Automatic Tool Changer: 24 positions Power Supply: 380 V / 50 Hz Installed Power: 20 kVA Weight: 5,100 kg Operating Hours: approximately 460 h Equipment: FANUC Series 32i-Model A CNC control 24-position automatic tool changer 12,000 rpm spindle Chip conveyor Cooling system Hfodpjzxgvmefx Ag Sjn Fully enclosed work area CE certificate Application: Ideally suited for: Precision milling Machining of steel, stainless steel, and aluminum Single-piece and series production Tool manufacturing Mechanical engineering companies If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Max. machining diameter: 280 mm Hfjdpezv D H Rjfx Ag Sen Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Condition: used, Year of construction: 1985, used in excellent condition low mileage cleaned functionally tested Hedpfx Asz Np Irog Ssfn partially refurbished Manufacturer: Flott Type: 484001 Year of manufacture: 1985 Machine no.: 31840024 Manual copying device Fixed tailstock Four-jaw chuck Drill chuck mm: 125 Speed stages: 500 - 750 - 1125 - 1700 - 2500 Center distance approx. mm: 1200 Center height approx. mm: 240 Motor kW: 1.5 Space requirement approx. L x W x H mm: 2100x800x1100 Weight approx. kg: 350 Total connection value kW: 1.5 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, Cycle lathe Challenger Microturn BNC 1840 Hjdpfx Agsyu Tdko Sefn

Condition: like new (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning diameter: 330 mm, center height: 165 mm, center width: 750 mm, turning length: 750 mm, quill stroke: 110 mm, total length: 1,800 mm, total width: 1,200 mm, total height: 1,650 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, overall weight: 1,250 kg, Conventional precision lathe, control WEILER C3/Sinumerik 840D, center high 165 mm, between centers 750 mm, bore Ø 43 mm, speed 1 - 4500 rpm stepless, motor 9 kw, equipement: collet device, coolant device, 3-jaws chuck SCHUNK, drill chuck, tool post MULTIFIX with 6 toolholders, lamp, dimensions 180x120x165 cm, weight ca. 1250 kgs; only a few working hours Hodoz Rpmqepfx Ag Ssfn

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine approx.LxWxH: 4,3 x 2,5 x 1,95 m WEILER E70 x 2000 Oil Country Lathe – Rare Special Version with 216 mm Spindle Bore We are pleased to offer this exceptionally rare WEILER E70 x 2000 Oil Country Lathe, manufactured in 2003, in very well-maintained condition. This machine is not a standard WEILER E70, but a factory-built special Oil Country version, specifically designed for machining long pipes, bar stock and large-diameter workpieces. Featuring an extra-large 216 mm spindle bore, this machine is one of the rare WEILER Oil Country Lathes and was specially developed for demanding applications in the oil & gas, pipeline, energy and heavy engineering industries. Wide Range of Applications Thanks to its rigid construction, large spindle bore and heavy-duty design, this machine is ideally suited for: Oil & Gas Industry Drill Pipe Machining Casing and Tubing Pipes Pipeline Construction Hfjdpfx Ajzdn S Heg Sen Energy Industry Steel and Pipe Mills Mechanical Engineering Heavy Equipment Manufacturing Repair and Maintenance Workshops Machine Repair Companies Tool and Die Shops General Engineering Workshops Job Shops and Contract Manufacturing Single-Part and Small Batch Production Hydraulic Cylinder Manufacturers Companies machining large bars, shafts and tubular materials *

Condition: used, functionality: fully functional, machine/vehicle number: 3988, total width: 450 mm, total length: 2,500 mm, total height: 1,000 mm, overall weight: 200 kg, turning length: 1,300 mm, MVM Capri T.1500 Heavy-duty – Professional machine Lathe in a robust design with a convenient copying mechanism Table extension up to 230 cm Hodez R Abzopfx Ag Sjfn 4 speeds Left-right rotation Copying mechanism with handwheel Various tool rests Accessories (chuck, discs, etc.) 6 lathe tools READY FOR USE Price negotiable / VAT can be shown separately

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm Hfjdpfjt Tqgxox Ag Sjn turning length 1500 mm spindle bore 62 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U dimensions of the machine ca. 3,5 x 1,6 x 1,7 m total power requirement 9 kW weight of the machine ca. 4,5 t Machine has a 4 position tool holder, a three jaw chuck, a rotating center and a taper gauge.

Condition: good (used), Year of construction: 1989, CNC turning machine WEILER Primus 2 CNC, serial number 160, CNC Bosch. Hjdpoz R R E Njfx Ag Ssfn

Condition: good (used), CNC turning machine WEILER DZ42 CNC. Year of manufacture 2001, serial number 173, CNC Siemens 840C, machine weight approximately 3,800 kg, with bar feeder HATEC AM9. Hjdpfxoz R R Hts Ag Sofn

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 135xxx, Equipment: documentation/manual, We are offering this very well-maintained Okuma CNC lathe, manufactured in 2008. Manufacturer: Okuma Year of manufacture: 2008 Machine type: CNC lathe Accessories: Chip conveyor, extraction system, tool holders (available at an additional cost) Hfjdpfx Agjz I Sv Io Sen If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2006, We are offering this used Okuma LU300-M CNC turning machine, manufactured in 2006. Manufacturer: Okuma Model: LU300-M Year of manufacture: 2006 Hfsdpfxez Rwfuo Ag Sjn Date of production: 11/2006 Serial number: 126842 Condition: used Machine category ID: 1182 Machine type ID: 190 Machine type: CNC turning machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, MAZAK QUICK TURN 200MSY Max. machining diameter: 380 mm Max. machining length: 575 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control: Mazatrol SmoothG - Hydraulic KITAGAWA 3-jaw chuck BB-208 for main spindle, diameter 210 mm - Hydraulic KITAGAWA 3-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye Hsdjzgw Icepfx Ag Sofn - C-axis - C-axis counter-spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Robot interface - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Hodpfozx Nxdsx Ag Sofn Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.