Used Vertical Dryer for sale (9,256)

Condition: used, 20-position tool changer Operating hours: approx. 5,886 hours Footprint: approx. 1700 x 2500 x 2700 mm Lhjdpozz Hqvjfx Abyel

Condition: used, Year of construction: 2003, Control system: MSG-501 Machine weight: approx. 6,700 kg Operating hours: 1,507 h Footprint: approx. 2,600 x 200 x 3,400 mm X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table-to-spindle distance: 150–660 mm Table size: 1,100 × 600 mm Table load capacity: 1,000 kg T-slots: 6 × 18 mm Max. spindle speed: 8,000 rpm Optional spindle speed: 15,000 rpm Spindle taper: No. 50 / BT-50 or CAT-50 Spindle bearing inner diameter: 100 mm Rapid traverse X/Y/Z: 42,000 mm/min Cutting feed rate: 1–6,000 mm/min Tool magazine: 30 tools Optional tool magazine: 60 tools Max. tool diameter: 120 mm Max. tool diameter without adjacent tool: 240 mm Max. tool length: 350 mm Lhjdpfezz Hnuex Abysl Max. tool weight: 20 kg Spindle motor: 30 / 25 kW Coolant tank: 230 l Electrical connected load: 55.6 kVA Machine height: 2,640 mm Space requirement: 2,728 × 2,620 mm Machine weight: approx. 6,700 kg

Condition: used, Footprint: approx. 6000 x 7000 x 6850 mm Includes broach(es); not all are present. Rated force: 25 tons Peak force: 37 tons Lodszz Hl Tjpfx Abyjhl Stroke: 66" / approx. 1,676 mm Cutting speed: 0–33 ft/min Return speed: 0–60 ft/min Equipment: retraction unit Table: sliding table, 3 stations

Condition: used, Year of construction: 2004, MAZAK VTC 200B II, year 2004 X axis: 1120 mm Y axis: 510 mm Z axis: 510 mm Spindle: max. 12,000 rpm SK40 Through-spindle coolant (IKZ) Table length: 1460 mm Table width: 510 mm Table load: 800 kg Tool changer: 30 positions Spindle power: 18.5 kW Spindle speed: 12,000 rpm Tool changer: 30 positions IKZ: Yes Number of controlled axes: 3 Chip conveyor: Yes Lsdpoylnxkofx Abyshl Cooling system: Yes

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Lodpfx Ajzpynksbyehl Travel in the Y-axis: 410 mm Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Documentation included Coolant tank with pumps

Condition: used, DECKEL MAHO DMU 60T Lhjdewg Df Dopfx Abyol HEIDENHAIN 426 – worktable dimensions (length x width): 900 x 500 mm – table load: 350 kg – maximum feeds in the X/Y/Z axes: 600/525/ 500 mm

Condition: used, Year of construction: 2012, Feeler NBP 1300A Year of manufacture 2012 X-axis travel 1300 mm Y-axis travel 610 mm Z-axis travel 600 mm Table 1500x600 mm Spindle 12,000 rpm BT40 Spindle coolant Lhjdpfx Abjww Indeysl Heidenhain TNC 530 control

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Fanuc 31i control X 500mm Y 400mm Lhjdpfx Aezrkycobyol Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table

Condition: excellent (used), Year of construction: 2010, DMG DMU 80 monoBLOCK, 5-axis Year of manufacture: 2010 Control: iTNC 530 Technical specifications x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Ljdpjytfn Sofx Abyehl turning speed range - main spindle max. 12.000 min/-1 tool taper SK40 swivel milling head B-axis: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg NC rotary table, integrated, C-axis: 360 ° number of toolpositions 2x16 pos. tool taper SK40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Accessories/options: - swarf conveyor - replaced X/Y/Z ball screws and spindle in 2019 - full set of documentations - precision vice - tool holders

Condition: good (used), Year of construction: 1999, CNC Vertical Machining Center MORI SEIKI SV – 400 Control system: FANUC MSC-501 Travel range X-axis: 600 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mounting: BT40 Spindle speed: 12,000 rpm Drive power: 22/18.5 kW Tool magazine: 40 Lhodsz D T I Repfx Abyel Table size: 900 x 500 mm Accessories: Preparation for internal coolant supply, high-pressure pump 20 bar, 2 x articulated band chip conveyor, 30-position tool magazine, 4-axis interface with rotary table Nikken CNC-200

Condition: good (used), Year of construction: 2010, Vertical sheet metal storage system, drawer-based sorting system for sheet metal, Hegla, 10 compartments for sheets 1.50m x 3m – used: Price ex works: €4,500 (net)! Manufacturer: Hegla Type: SCH-SL-3 Year of manufacture: 03/2010 Maximum storage length: 3,000 mm Maximum storage height: 1,500 mm Number of compartments: 10 Load capacity: 500 kg per drawer (10 x 500 kg) Max. loading height: 1,500 mm Overall dimensions L x W x H: 3,250 mm x 1,590 mm x 1,950 mm Lhsdpfx Absz Dtxioyel Condition: good Available: immediately Location: 87719 Mindelheim

Condition: used, Year of construction: 2010, Technical details: swing diameter: 260 mm control: 840 D SIEMENS turning speeds: 3.500 1/min spindle drive: 36 / 28 kW chucking diameter: 260 mm travel -x axis: 900 mm travel -z axis: 400 mm turret head: 12 Pos. tool holder: VDI 40 rapid power traverse in X-and Z direction: 100 / 30 m/min dimensions of the machine ca.: 5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm, * Lsdpfx Abetpq Ursyjhl

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) * Lodpfx Absmcibweyjhl

Condition: good (used), Year of construction: 2001, DMG / MAHO DMC 80 U – CNC Universal Machining Center Manufacturer: MAHO / DMG Model: DMC 80 U Machine Type: CNC Universal Machining Center Year of Construction: 2001 Machine/Factory Number: 71.408.395 Control System: MillPlus IT Operating Hours: approx. 90,896 h Spindle Operating Time: approx. 44,717 h Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Draw-in Force Target: 22 kN Measured Tool Draw-in Force: 17 kN Spindle/Geometric Runout at L = 0 mm: 0.005 mm Spindle/Geometric Runout at L = 200 mm: 0.005 mm Tool Management Tool Magazine: 120 tool positions Automatic Tool Changer Tool gripper disassembled and cleaned as part of the last documented maintenance Pallet Automation 6 pallet positions Automated pallet handling system available Rotary/NC table available B and C axes available, according to the electrical maintenance report Axes / Drives Documented in the maintenance report of 2026 NC rotary table and axes Pallet changer / pallet handling Tool magazine / tool changing system Coolant and filter system Coolant system Chip conveyor Interlit compact filter Spindle oil cooler Lhodpoz D Stfofx Abyjl Smoke/mist extraction Ringler extractor During the documented maintenance, the following were carried out, among others: Coolant tank steamed and cleaned Chip conveyor cleaned Extraction system cleaned Tool gripper disassembled and cleaned Pressure accumulator checked and refilled with nitrogen to 80 bar Extractor cleaned Machine geometry checked Hydraulics / Lubrication Spindle cooling unit Hydraulic unit NC rotary table Oil changed during maintenance Central lubrication Performed by DECKEL MAHO Pfronten. The following were checked or serviced, among others: Electrical cables Control cabinet Hydraulic lines and hoses Compressed air system Check valves Axes Lighting Filters Machine function Emergency stop system Door locks Two-hand operation Machine geometry Electrical safety Check valves were renewed according to the maintenance report Electrical check very good according to DIN EN 60204 Insulation measurements – excerpt All documented measurement points were evaluated as OK. Main spindle motor: 192 MΩ X-axis: 255 MΩ Y-axis: 103 MΩ Z-axis: 427 MΩ B-axis: 279 MΩ C-axis: 108 MΩ Tool magazine: 267 MΩ Pallet changer drive: 113 MΩ Pallet changer linear drive: 90 MΩ Vertical stroke pallet changer: 1.12 GΩ Smoke extraction: 97 MΩ Chip conveyor: 1.42 GΩ Tool gripper: 1.66 GΩ Hydraulics: 2.21 GΩ Machine lamp: 447 MΩ Lubrication: 3.26 GΩ Protective conductor test Specification: < 0.3 Ω Measured values: Protective door machine: 0.16 Ω Protective door pallet changer: 0.26 Ω Control panel tool changer: 0.13 Ω Coolant system: 0.11 Ω Spindle cooler: 0.21 Ω Control panel work area: 0.03 Ω Spindle: 0.22 Ω Ringler extractor: 0.21 Ω All documented measurement points are within the specified target range. Equipment CNC control system MillPlus IT Universal machining B-axis C-axis / NC rotary table 12,000 rpm spindle 120-position tool magazine 6-position pallet system Automatic tool changer Automatic pallet handling Coolant system Interlit compact filter system Chip conveyor Spindle oil cooler Smoke/mist extraction Ringler extractor Hydraulic unit Central lubrication Comprehensive safety equipment Geometry test, runout value of 0.005 mm at a measuring length of 200 mm Tool draw-in force 17 kN, target value 22 kN

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, volume flow: 1,116 m³/h, type of cooling: air, pressure (max.): 14 bar, Equipment: type plate available, Used Atlas Copco FD310 refrigeration dryer Lhedpfoym Ub Ujx Abyjl 18.60 m³/min 14 bar Year of manufacture: 2011

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, volume flow: 990 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used MTA DEIT165 refrigeration dryer 16.50 m3/min Ljdjy Nkl Nopfx Abyjhl 16 bar Year of manufacture 2016

Condition: like new (used), Year of construction: 2021, functionality: fully functional, volume flow: 388.8 m³/h, type of cooling: air, pressure (max.): 14 bar, Equipment: type plate available, Used Atlas Copco FD310 refrigerant dryer 6.48 m3/min 14 bar Lhedpfxezkvbpj Abyel Year of manufacture: 2021

Condition: like new (used), Year of construction: 2019, functionality: fully functional, volume flow: 140.4 m³/h, type of cooling: air, pressure (max.): 14 bar, Equipment: type plate available, Used Atlas Copco FX6 refrigerant dryer 2.34 m3/min Lsdpjzrtbiofx Abyehl 14 bar Year of manufacture: 2019

Condition: excellent (used), Year of construction: 2015, operating hours: 83,875 h, functionality: fully functional, volume flow: 2,040 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used Kaeser TF 340 refrigerated dryer Lhodpfszupcuex Abyjl 34 m3/min 16 bar Year of manufacture: 2015

Condition: excellent (used), Year of construction: 2018, operating hours: 81,265 h, functionality: fully functional, volume flow: 1,380 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used Kaeser TF 230 refrigerant dryer 23 m3/min 16 bar Lodpfx Abezupp Usyjhl Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2015, operating hours: 78,886 h, functionality: fully functional, volume flow: 1,680 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used Kaeser TF 280 refrigerant dryer 28 m3/min Lhodpfx Abezupr Neyel 16 bar Year of manufacture: 2015

Condition: excellent (used), Year of construction: 2015, operating hours: 75,881 h, functionality: fully functional, volume flow: 1,680 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used Kaeser TF 280 refrigerant dryer Lhedpfx Abozupuwjyel 28 m3/min 16 bar Year of manufacture: 2015

Condition: excellent (used), Year of construction: 2016, operating hours: 64,020 h, functionality: fully functional, volume flow: 1,026 m³/h, type of cooling: air, pressure (max.): 14 bar, Equipment: type plate available, Used Atlas Copco FD285 refrigerated dryer 17.10 m³/min 14 bar Lhedpfoy Iwc Eex Abyol Year of manufacture: 2016

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,000 kg, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 25,000 W, spindle nose: HSK 63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, KEY FEATURES: table dimensions 1200 × 600 mm table load 1,200 kg axis travels X 1,050, Y 600, Z 600 mm HEIDENHAIN i-TNC 530 CNC (color LCD screen), advanced conversational programming high-speed package RS 232 serial port, USB slot, RJ 45 Ethernet network port and hard disk Rapid traverse rates 40 m/min on all axes Working feed rates up to 20 m/min Cooled ball screws weight 7,000 kg HSK 63A electrospindle, 20,000 rpm, 25 kW, chiller-cooled remote handwheel RENISHAW tool control laser Ljdpfx Ajz D Allobyshl 30-position random tool changer standard equipment tool holder set (at least 10 pieces) integrated fume extractor high-pressure coolant through the spindle coolant tanks with pumps, chip conveyor operation, maintenance and programming manuals, electrical diagrams CNC manuals CE certificate leveling feet

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier, charger for scrubber-dryer -Manufacturer: Gansow, charger minitron II E 24/17 Dryfit-Bloc Lsdpfjz D S Tljx Abyshl -Input voltage: 230 V 50 Hz -Power: 24 V / 17 A -Dimensions: 345/210/H230 mm -Weight: 12 kg