Used Vertical Dryer for sale (9,241)

Condition: defective spare-parts repository (used), Year of construction: 1991, functionality: not functional, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, table width: 380 mm, table length: 925 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 350 mm Table size: 925 mm x 380 mm Rodpfx Aasyf Ac Dsmon Spindle taper: SK 40 Spindle speed: up to 6,000 rpm Drive power: 11 kW Tool changer capacity: 20 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,600 x 2,100 x 3,000 mm Machine weight: approx. 3,600 kg Note: The machine no longer starts. It is being sold for spare parts.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 102, turning height: 1,250 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,550 mm, faceplate diameter: 1,250 mm, spindle speed (max.): 3,000 rpm, TECHNICAL DETAILS Turning height: 1,250 mm Workpiece weight: 8,000 kg Turning diameter: 1,550 mm Faceplate diameter: 1,250 mm Faceplate speed: 200 rpm Spindle speed: 3,000 rpm Tool changer: 15 positions MACHINE DETAILS Control: Siemens 840 D Type of supply current: Alternating current (AC) Year of last overhaul: 2000 EQUIPMENT C-axis Rsdpfx Ajybbi Isamjn Infinitely variable speed 3-jaw hydraulic-mechanical chuck Coolant system Belt filter unit Internal coolant supply

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Milling spindle (BT40): 12,000 rpm MACHINE DETAILS Control unit: Siemens 828D Operating hours: Power-on hours: 26,247 h Spindle hours: approx. 400 h (total 4,727 h) EQUIPMENT - Active electrical cabinet air/air cooler - Network connection Rsdpfx Aaeyf E Szjmjn - USB interface - Spindle chiller - Side windows left and right for large components - Safety cabin with armoured glass - Coolant pump at spindle - Pump for chip flush device - Air at the spindle via M-code function - Operating status light - Oil separator - Electronic handwheel - ICS system (internal coolant supply) - Pump for ICS - 24-position tool changer - Hinge-type chip conveyor, rear discharge - Glass scales including purge air by Siemens - Wireless workpiece measuring system Renishaw OMP60 - Tool measuring system Renishaw NC4 - Automatic machine door Note: The Halter automation system as well as vices including zero-point clamping system are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11165/1, working width: 1,300 mm, workpiece height (max.): 40 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. processable thickness: 40 mm EQUIPMENT Drying system with 3 UV lamps Transport system with motorized rods Rsdpsydn S Ijfx Aamsn Separate control cabinet

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 4,600 mm, cutting height (max.): 2,070 mm, cutting depth: 60 mm, saw blade bore: 30 mm, Submission of a bid obligates you to collect the item by the deadline of 27.02.2026! The machine was overhauled in the workshop, functionally tested, and cleaned in 2025! TECHNICAL DETAILS Cutting length: 4,600 mm Vertical cutting height: 2,070 mm Horizontal cutting height: 1,958 mm Cutting depth: 60 mm Saw motor power: 3.9 kW Saw blade diameter: ∅ 250 mm Saw blade bore: 30 mm Saw blade speed: 5,250 rpm Extraction port: ∅ 100 mm Strip gauge: 600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 5,826 x 2,838 x 1,428 mm Rsdpfx Aeyfnuroamen Weight: approx. 910 kg Connection value/power supply: 4.8 kW / 3 ~ 400 V | 50 Hz EQUIPMENT Electromagnetic motor brake Mechanically braked support rollers

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 400 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 760 mm Y-axis: 400 mm Z-axis: 400 mm Rodpfxsya Dw Ss Aamen Table size: 1,020 x 410 mm Max. table load: 400 kg Spindle speed: 8,000 rpm Tool holder: CAT 40 / BT 40 Tool changer: 20 positions Accuracy Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm MACHINE DETAILS Control: MAZATROL M-PLUS EQUIPMENT Robust construction Fully hydraulic table Stable cast iron structure Suitable for aluminium, steel and plastics User-friendly programming Integrated simulation and diagnostic software Regularly serviced Coolant and lubrication systems intact

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 410 mm Z-axis travel: 460–510 mm Table size (L × W): 700 × 410 mm Maximum table load: approx. 400 kg per pallet T-slots: 18 × 4 mm Pallet changer: Automatic pallet changer (APC) Changeover time: ~4 seconds Pallet clamping: 3-point clamping system (patented) Spindle taper: BT-40 / ISO40 Maximum spindle speed: 8,000 rpm Spindle motor: approx. 9 kW Tool magazine (ATC): 24 positions Tool capacity: 24 Maximum tool diameter: approx. 80–125 mm Maximum tool length: up to ~250 mm Maximum tool weight: approx. 7 kg per tool Tool change time: Rapid change arm Rapid traverse speed (X/Y/Z): up to approx. 30 m/min Rjdpfxjya Dlcs Aamsn Feed rate: up to approx. 10,000 mm/min Axes: 3 axes (X / Y / Z) MACHINE DETAILS Dimensions & Weight Machine dimensions (L × W × H): approx. 2,360 × 4,365 × 2,878 mm Machine weight: approx. 7,500 kg EQUIPMENT Automatic pallet changer (APC) 3-point clamping system for pallet fixing FANUC CNC control (e.g. 0iMB) LCD color display Automatic lubrication pump Coolant system incl. wash hose Chip conveyor Work light Electronic handwheel (MPG)

Condition: excellent (used), Year of construction: 2012, operating hours: 27,960 h, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 27,900 h, number of spindles: 1, number of slots in tool magazine: 41, Haas VF-3SSYT 5 axis Technical specifications: travel distance X-axis : 1016 mm travel distance Y-axis : 660 mm travel distance Z-axis : 635 mm • Spindle 12,000RPM • Tool Clamping SK/BT 40 • Tool Magazine – 40 Places +1 • Chip conveyor • ICS included (might be 30 bar) • Process Measurements – Renishaw Kit – OMP+OTS • Production Date –2012 • Spindle time - 27900 Redpfexbifcsx Aamsn • 5 axis on the table Located in Israel 2 hour from international Airport under power and ready for inspection

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: VM40027E, Selling for spare parts 2 CNC milling machines Hitachi Seiki VM40II and VM50. Redpod Tf Npsfx Aamon

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. Rodol Sm N Topfx Aamon The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: used, Year of construction: 1975, Vertical Turret Lathe 1512 Swing diameter over bed, mm: 1250 Maximum workpiece mass, kg: 6000 Maximum workpiece height, mm: 1000 Spindle speed range, min/max, rpm: 1.25 / 250 Main drive motor power, kW: 30 Machine dimensions: 2920 x 2705 x 4100 Machine weight, kg: 14800 Redpfoya U Tqox Aamsn

Condition: good (used), Year of construction: 2015, Moretto XD2 TS (2015) Hopper F1F30 Rsdoyfhyujpfx Aamen DEHUMIDIFYING device XD2 TS 1KW

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Rjdpfxjyfg D Ss Aamsn Working hours: 15.571 h

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Drying Basket Material: 1.5 mm stainless steel thickness, electropolished. Rsdpfx Aaorkl Unsmen Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Drying Fan Material: Aluminum Cast Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: L: 850 mm W: 850 mm H: 1175 mm

Year of construction: 2025, condition: new, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Brsgistoyp Conveyor Coolers Cyclones Bunker Packing machines Redpfx Aasghmp Nomsn TSF-Justinas

Condition: new, Year of construction: 2026, total length: 1,810 mm, total width: 680 mm, total height: 1,605 mm, power: 11 kW (14.96 HP), pressure (min.): 6 bar, pressure (max.): 8 bar, Equipment: CE marking, DUCOMP BRD 11 kW - Screw compressor + Air Tank + Dryer Rodpfx Aasygdk Sjmjn In BRD Series Compressors, the compressor and dryer are mounted on the air tank and their connections are made. It is shipped ready for operation thanks to its internal tank and dryer.

Condition: new, Year of construction: 2026, total length: 1,010 mm, total width: 680 mm, total height: 1,605 mm, power: 7.5 kW (10.20 HP), fuel type: electric, pressure (min.): 6 bar, pressure (max.): 8 bar, Equipment: CE marking, DUCOMP BRD 7.5kW - Screw compressor + Air Tank + Dryer In BRD Series Compressors, the compressor and dryer are mounted on the air tank and their Rodpfx Aajygdk Esmjn connections are made. It is shipped ready for operation thanks to its internal tank and dryer.

Condition: good (used), Europress by CK. press force 30 t. Bale weight 280-320 kg Rjdjycw Ebepfx Aamon

Condition: good (used), Verical baler with 30 t press force Rsdpfx Ajycw Dwjamsn

Condition: new, Year of construction: 2026, functionality: fully functional, • Working range in X – Y – Z mm. 4,200 – 1,600 – 100 (available on request up to 6,000 x 2,200mm.) • Continuous work table • Lateral and bottom reference stops • Gantry machine with Gandry system – Double motorization • Milling unit with 4-axis electrospindle, HSD brand • Blade unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 attachment • Inverter Redswta Ibspfx Aamjn • 10-position tool magazine • Control system: OSAI • Software • Easy programming • Importing files • Remote control panel/console • Teleservice and video diagnosis: real-time solution • Automatic lubrication of the guides • Side bands to protect the unit • Machine documentation: use and maintenance manual, software manual, spare parts catalogue, wiring diagram, CE declaration of conformity.

Condition: excellent (used), Manufacturer: Haas Model: VM-6HE Serial number (SN): 1067464 Axes: 3-axis CNC machining center Spindle mount: SK40 Redpfx Aoxywiyoamen Axis travels (X/Y/Z): 1,625 × 812 × 764 mm Table: clamping table Equipment: • Chip conveyor • Automatic tool changer (ATC) • Tool magazine: 24 positions

Condition: good (used), Year of construction: 1999, functionality: fully functional, Year of manufacture: 1999 Width: 1200 mm Length: 1200 mm Redpfjx Uwtkex Aamjn Number of axes: 5 Tool holder: SK50 Spindle speed (RPM): 3,500 Workable materials: Steel, aluminum, titanium, graphite, copper, invar, composite, Delrin, Peek

Condition: good (used), Year of construction: 2002, functionality: fully functional, Year of manufacture: 2002 Width: 1000 mm Length: 400 mm Height: 700 mm Number of axes: 5 Redjx Uwr Tspfx Aamon Tool holder: SK50 Spindle speed (rpm): 15,000 Machineable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance Z-axis: 1,400 mm, Year of manufacture: 2016 Width: 3,000 mm Length: 1,400 mm Height: 700 mm Rodex Uwltepfx Aamen Number of axes: 3 Tool holder: BT50 Spindle speed (RPM): 6,000 Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, Year of construction: 2021, HAAS MINIMILL 2 Rjdpfx Asyaqtasamjn Year: 2021 Table size: 1016 mm x 356 mm X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle: SK40 Spindle speed: 0-6000 rpm 2x Renishaw probes Tool changer: 20 tools Approximate weight: 2313 kg