Used Vertical Internal Grinder for sale (15,386)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Njdpfx Aeyug Hxsqvslb The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), We have 2 cutting mills for sale. The price refers to mill no. 2. The machines were used for cutting plastic but can also be used for processing other synthetic materials. Both are equipped with a liquid cooling system. Technical data (mill no. 1): -Dimensions: 150 × 115 cm / Height: 210 cm -Rotor diameter: 36 cm -Rotor/knife width: 55 cm -Number of knives: 3 (Fixed knives positioned at an angle, which reduces resistance during cutting and shredding, making the machine more efficient) -Inlet: 30 × 53 cm -Motor: 22 kW / 30 hp -Liquid cooling Technical data (mill no. 2): -Dimensions: 150 × 125 cm / Height: 180 cm -Rotor diameter: 25 cm -Rotor/blade width: 52 cm -Number of blades: 3 -Motor: 22 kW / 30 hp Nlodpfjuw Skhjx Aqvsb -Liquid cooling Prices: Mill no. 1 – €7200 Mill no. 2 – €5900 For both: €11,900 TAG: plastic grinder, shredder, plastic recycling, plastic cutting machine, industrial grinder, cutting blades, plastic milling machine, industrial machine, cooled grinder, recycling machine, crusher

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 Nodpfexpqm Rex Aqvolb CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), KOLBE MWE52 MIXER GRINDER Will produce up to 1700 kg/h of product Nsdpfx Aqsx Swxbjvjlb

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Nledpswwkk Ijfx Aqvob Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid In good working order

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1764, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Control: Fanuc Nedpfxjy Sluqs Aqvjlb EQUIPMENT Accessories as shown in the pictures

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Nedpfx Aqjy Nzuhsvolb Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: ready for operation (used), Year of construction: 2001, operating hours: 8,200 h, functionality: fully functional, machine/vehicle number: 28850018432, TECHNICAL DETAILS Tool diameter: max. 140 mm Speed at maximum diameter, max.: 6,500 rpm Njdpfsy Rta Eox Aqvolb Balancing quality according to DIN ISO 1940: G 6.3 Tool Magazine Number of tools: 24 Tool diameter, standard tools: max. 80 mm Tool diameter, special tools with adjacent positions free: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg Magazine load: max. 72 kg Table Clamping surface with T-slots DIN 650-14: 800 x 500 mm Loading height, top of table: 850 mm Workpiece height: max. 240 mm Table load capacity: max. 500 kg Coolant System Tank capacity with standard chip container: 150 l Tank capacity with spindle cooling: 80 l Pump performance standard, flow rate: 30 l/min Pump performance standard, pressure: 1.2 bar Tank capacity with chip conveyor option: 750 l Pump performance, chip conveyor option, flow rate: 40 l/min Pump performance, chip conveyor option, pressure: 3.0 bar Tank capacity including chip conveyor: 750 l Pump performance, internal coolant supply, flow rate: 30 l/min Pump performance, internal coolant supply, pressure: 15 bar Chip Disposal Chip conveyor discharge height: 850 mm Chip conveyor type: scraper belt MACHINE DETAILS Rated power: 30 kVA Rated current: 42 A Delayed main fuse: 3 x 50 A Operating voltage: 400 V Frequency: 50 Hz Compressed air connection: 6 bar Required system delivery rate: 38 Nm³/h Ambient temperature: +5 to +40 °C Average temperature over 24 h: +35 °C Relative humidity: 30–95 % Dimensions & Weight Transport dimensions of the machine with table (L x W x H): 3.1 x 2.1 x 2.4 m Transport weight: approx. 4,200 kg Mounting elements: 4 x BNV 150/4 EQUIPMENT Fixed station coding Vertical tool changer Pick-up system via work spindle Coolant system Spindle cooling Chip conveyor Internal coolant supply Mounting elements BNV 150/4

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 Nljdpfoy R Rn Hjx Aqvob Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,300 mm Travel Y-axis: 600 mm Travel Z-axis: 700 mm Max. spindle speed: 12,000 rpm Taper: HSK 63 - A ICS (internal coolant supply): 20 bar Tool changer: 80 positions MACHINE DETAILS Control: Heidenhain iTNC 530 EQUIPMENT Nlodpfjy R Ur Aex Aqvsb Electronic handwheel Paper band filter Fully enclosed work area Direct measuring systems Chip conveyor Bellows with steel lamellae 3D measuring probe Laser measuring system

Condition: defective spare-parts repository (used), functionality: not functional, controller manufacturer: Siemens, table width: 470 mm, table length: 990 mm, overall weight: 5,500 kg, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Njdey Ni Agspfx Aqvjlb Note: The machine is defective. The control system does not power up, so it requires repair or can be used as a source of spare parts. Otherwise, the machine is in good mechanical condition. TECHNICAL DETAILS Spindle speed: 10,500 rpm Table length: 990 mm Table width: 470 mm MACHINE DETAILS Control manufacturer: Siemens Machine weight: 5,500 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,426 h, functionality: fully functional, machine/vehicle number: 101098, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 130 mm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Working stroke, X-axis: 150 mm Travel range, Z-axis: 200 mm Chuck diameter: 160 mm Turning diameter: max. 200 mm Machining diameter: max. 130 mm Part length: max. 110 mm Main spindle Spindle flange according to DIN 55026: Size 5 Spindle bearing, diameter front: 80 mm Speed, hybrid bearing: max. 6,000/7,500 rpm Main drive AC asynchronous motor: 1MB200E Indramat Nlsdpfx Ajy T Iupeqvjb Low-voltage technology: Fanuc Power at 100/40 % duty cycle: 16/24 kW Torque at 100/40 % duty cycle: 102/153 Nm Rated speed: 1,500 rpm Feed drive Rapid traverse speed X: 60 m/min Rapid traverse speed Z: 30 m/min Feed force X and Z: 5 kN Ball screw diameter X and Z: 40 mm Acceleration X/Z: 5/5 m/s² Tool holder Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Tool length incl. holder: max. 190 mm Pitch circle diameter: max. 740 mm Pitch circle diameter Lifetool: max. 620 mm Tool holder with driven tools Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Speed: max. 6,000 rpm Rated speed: 3,000 rpm Torque at 10 % duty cycle: max. 37 Nm Torque at 25 % duty cycle: max. 26 Nm Torque at 100 % duty cycle: max. 14 Nm MACHINE DETAILS Closed standard automation Number of carrier bars with workpiece diameter 27 mm: 85 Number of carrier bars with workpiece diameter 18 mm: 130 Permissible total load: max. 120 kg Pick-up stroke depressed: 1 mm Pick-up stroke over-depressed EMERGENCY STOP: 5 mm Pick-up spring travel: max. 30 mm Chain length: 162 inches Chain pitch: 25.4 mm Chain tension with 27 carrier bars: 400 N Chain sprocket: Z = 30 Gear ratio: i = 100 Motor revolution/band revolution: 540 Loading time: 2–4 s Electrical equipment Operating voltage: 400–480 V Control voltage DC: 24 V Control voltage AC: 230 V Frequency: 50/60 Hz Connected load: 31 kW Supply line fuse: 50 A Design of the electrical system: VDE 0113 Operating hours: 5,426 h

Condition: ready for operation (used), Year of construction: 2006, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040033, rotational speed (max.): 5,000 rpm, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Work area X-axis: 360 mm Work area Y-axis: 120 mm Work area Z-axis: 260 mm Handling area X/Z: 490/260 mm Maximum spindle speed: 5,000 rpm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose, cylindrical: ∅ 140 mm Feed force X/Y: approx. 8,000/10,000 N Feed force Z: 10,000 N Rapid traverse rate X/Z/Y: approx. 80/40/7.5 m/min Acceleration X/Z/Y: 7 m/s² MACHINE DETAILS Control system: SIEMENS Sinumerik Power at 100% duty cycle ED main spindle: 20 kW Torque at 100% duty cycle ED: 105 Nm Power at 40% duty cycle ED: 27 kW Torque at 40% duty cycle ED: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Rated power: 20 kW Apparent power: 25 kVA Nodpfx Aqoy T Itrevjlb Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040018, rotational speed (max.): 5,000 rpm, controller model: SIEMENS Sinumerik, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Working area, X-axis: 360 mm Working area, Y-axis: 120 mm Working area, Z-axis: 260 mm Handling area, X/Z: 490/260 mm Nsdpfx Aqjy T Im Eovslb Maximum spindle speed: 5,000 rpm Spindle through-hole diameter: 65 mm Spindle diameter at the front bearing: 110 mm Spindle nose, cylindrical: ∅ 140 mm Feed force, X/Y: approx. 8,000/10,000 N Feed force, Z: 10,000 N Rapid traverse rate, X/Z/Y: approx. 80/40/7.5 m/min Acceleration, X/Z/Y: 7 m/s² MACHINE DETAILS Control system: SIEMENS Sinumerik Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Rated power: 20 kW Apparent power: 25 kVA Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Nsdpfxsy T Ikkj Aqvelb Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Nljdpfxjy T Id Dj Aqveb Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Nledpfsy T Iddex Aqveb Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 5351126, controller model: Siemens 840D, number of slots in tool magazine: 42, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Tool holder: SK-40 Tool magazine: 42 positions MACHINE DETAILS Control system: Siemens 840D EQUIPMENT Tool breakage monitoring Filter unit: Knoll, type VRF 300/800 Nledpfx Asy S S N Ioqvsb Chip conveyor: Knoll, type 340 K-1/100

Condition: ready for operation (used), Year of construction: 2002, operating hours: 9,675 h, functionality: fully functional, controller model: U100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, number of axes: 3, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Main spindle: 12,000 rpm MACHINE DETAILS Control system: U100M Axes: 3 Tool changer (ATC): 32 SK40 Nlodoy S S Nnepfx Aqvjb Cutting time: 9,675 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Coolant system Preparation for A-axis (4th axis)

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 320, table load: 2,500 kg, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nledpfoy Sxmtex Aqvob Travel in X-axis: 1,250 mm Travel in Y-axis: 650 mm Travel in Z-axis: 750 mm Rapid traverse rate X-axis: 15 m/min Rapid traverse rate Y-axis: 15 m/min Rapid traverse rate Z-axis: 15 m/min Table load: 2,500 kg Maximum spindle speed: 6,000 rpm Number of tool positions in tool magazine: 40 MACHINE DETAILS Control model: Heidenhain iTNC 320 EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426 P, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 25 m/min Workpiece weight (max.): 900 kg Spindle speed (max.): 10,000 rpm Spindle taper: ISO 40 Spindle power: 19 kW Clamping surface: 1,150 x 490 mm T-slots: 5 at 100 mm pitch Nodpfjy R Am Ujx Aqvolb Number of tool magazine positions: 30 Tool change time: 3.5 sec Max. tool weight: 6 kg Max. tool length: 250 mm Max. tool diameter: 80 mm MACHINE DETAILS Control: HEIDENHAIN TNC 426 P EQUIPMENT Chip conveyor Operating manual CE Declaration of Conformity

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 5012 EX, functionality: fully functional, cutting width (max.): 3,300 mm, saw blade diameter: 250 mm, total length: 4,200 mm, total width: 1,200 mm, overall weight: 485 kg, TECHNICAL DETAILS Maximum cutting height (horizontal): 1,550 mm Maximum cutting width: 3,300 mm Maximum cutting depth: 55 mm Saw blade diameter: 250 mm Arbor bore for saw blade diameter: 30 mm MACHINE DETAILS Voltage: 400 V Fuse: 16 A Power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,200 x 2,450 mm Shipping weight: 485 kg Shipping packages: 1 unit EQUIPMENT CE marking Njdpfxjy Tu Dqe Aqvjlb Vertical & horizontal cutting

Condition: good (used), Max. Roll dia: 1000 mm Max. Roll Length: 5260 mm Njdpfxsq Dmkws Aqvolb Max. Roll weight: 16 Tonnes Control: Siemens 810

Condition: not inspected (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: UCP 1000, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens 828D, General specifications Control: Siemens 828D Weight: Approx. 10,100 kg Machine Type: 5-axis vertical machining centre Year of manufacture: 2001 M/C Model: UCP 1000 Power requirements: 3 Phase 400 V (100 A) Nsdpfxsyz Tnwo Aqvslb Travel and movement X-axis: 1,000 mm Y-axis: 750 mm or 800 mm Z-axis: 750 mm or 800 mm Rapid traverse rate: 30 m/min Max. working feed: 10 m/min Spindle and tool changer Spindle speed: Max. 15,000 rpm Spindle taper: HSK-A63 Tool magazine: 60 stations Max. tool weight: 8 kg Max. tool length: 300 mm Table and axis NC rotary swivel table: Diameter 800 mm or 1,100 mm Table rotation speed: 12 rpm Max. workpiece weight: 1,500 kg Number of controlled axes: 5 Other features Spindle torque: 127 Nm (at 40% duty cycle) Axis force: 10,000 N (X and Y/Z) Coolant: Through spindle coolant available

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, 5-AXIS MATSUURA MAM72-25V VMC Nedpfx Ajx Anlwjqvslb Category: Vertical Machining Centers (VMC) Reference No.: 3651 Year of Construction: 2004 Technical Specification: SPINDLE Spindle Taper : BT 40 WORKING CAPACITY Travels (XYZ) : 550 x 410 x 450 mm CNC Control : Fanuc 30i