Used Weld Tig Welder for sale (7,758)

Condition: used, Year of construction: 2019, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24. Year: 2019 Country of origin: Sweden. Size (L x W x H): 1150 x 620 x 1100 mm. Gbsdpfx Ahsxvq Dco Hsg Weight: 90 kg. With Esab water cooling unit, TA24 control panel and new Esab Exeor SR 21 4 m. TIG-hose. Machine have been tested and serviced. We have 2 machines of this type in stock.

Year of construction: 1999, condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: N SERIE: 99 1220, Hot air Polypropylene box seam welder. Manually fed polypropylene welding machine. Gbedsw Elrpspfx Ah Heg

Condition: excellent (used), L-sealer Brand: Smi Pack Model: FP 870 A Sealing frame length: 870 mm Sealing frame width: 600 mm Maximum film width: 800 mm Gbodpfjxk Uxmsx Ah Hjg Film bag thickness: 10 - 50 μm Accessories: Foot switch Roller conveyor: Length: 1000 mm Width: 550 mm Transport dimensions: Length: 1900 mm Width: 950 mm Height: 1500 mm Weight: 250 kg

Condition: good (used), Year of construction: 1980, TIG welding machine Messer Griesheim GW 200 DC 400 Volt Godpfx Ahotd Hhdo Hjbg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, warranty duration: 24 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 180 A, welding current at 100% duty cycle: 140 A, protection type (IP code): IP23, welding current (min.): 1 A, welding current (max.): 220 A, Equipment: type plate available, For sale: OTC DTX 2200 1A – 220A Gbodpfx Ajxk Taijh Heg 30% 220A 60% 180A 100% 140A 230V 50/60Hz Pulse – Fast Pulse (0,5-500 Hz) – Ultra Fast Pulse (500-2000 Hz) ColdTack (0,01 – 10,0 Sec) Pre gas (0,05 – 1,00 Sec) Post gas (0,5 – 25,0 Sec) Up Slope (0 – 5,0 Sec) Down Slope (0 – 8,0 Sec) Start current (5 – 220A) End current (5-220A) IP23S IEC 60974-1 IEC 60974-10 IEC60974-3 Steel – Stainless Steel Weldable Including: SR26 U/D 4M TIG Welding Torch Earth work cable 35mm² 4 Meter with clamp Gas hose Pressure regulator 24 Months Warranty Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, input frequency: 50 Hz, transport length: 1,500 mm, transport height: 1,000 mm, Laser welder ideal for stainless steel. # Laser power: 2000W # Laser source: Raycus # Controller: HW-20-60120 # Swing laser head ensures seamless welding # Water chiller: 2P # HW brand welding head with QBH 0.8KG Gsdpfxexw Sxqs Ah Hobg # Beam quality: 1.3m² # Laser wavelength: 1070±5nm # Adjustment frequency: 1000HZ # Voltage stabilizer # Protection mirrors: 10 pcs # Nozzles: 10 pcs Power supply TNS-60kVA Capacity: 60,000 VA Number of phases: three-phase Frequency: 50 Hz Rated current: 63.8 A Input voltage: 277-430 V Output voltage: 380 V Stabilizing accuracy: +4% Insulation heat resistance class: Class B Implementation standard: Q/HB301 Hongbao Electric Group Co. Ltd.

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Gedswp Ilyspfx Ah Hjbg Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Column-type spot welder PEI MOD. PBP 126 PX Year of manufacture: 2006 CE PEI POINT pneumatic spot welders are user-friendly and ideal for welding all types of metals. This machine is foot pedal operated with pneumatic drive and offers a maximum welding power of 25 kVA. The machine is also equipped with water-cooled electrode holder, electrodes, arms, and transformer. The upper arm is depth-adjustable and the lower arm is height-adjustable. Used • Pneumatic foot pedal operation • Maximum welding power: 25 kVA • Maximum capacity: 2.0 mm • Electrode force: 165 dan • Throat/Arms: 580 mm • Depth-adjustable upper arm • Height-adjustable lower arm • Steel frame • 400 V, 50 Hz Gbedpfx Ahjw T Tlfo Hjg

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment Gedportvi Uefx Ah Hsbg - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: excellent (used), Stud welder Make TRW. Nelson Type Alpha 850 YEAR OF MANUFACTURE 1995 maximum welding capacity studs up to 12 mm Godpfx Ahevcl T Ae Hobg welding current continuously adjustable from 100 - 850 A supply voltage 400 Volt , 32 A Transport dimension : length 550 mm width 320 mm height 380 mm

Year of construction: 2024, condition: new, Parameter: JSW-3000 Laser power: 3000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 3-phase 380V 50/60 HZ Gsdpfx Ahstwz Nme Hebg Maximum total energy consumption: 24.6KVA/37.4A Average energy consumption: 14.7KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 195kg Machine dimensions: Height: 1050mm, Width: 530mm, Length: 1240mm. Material processing capabilities for JSW 3000W welding function. Material: Stainless steel 0.5 - 8mm Carbon steel 0.5 - 8mm Galvanized sheet metal 0.5 - 8mm Aluminum 0.5 - 6mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Condition: new, Year of construction: 2025, The seam welding machine allows you to weld straight sheets and round sheet metal parts in high quality without burning them out. This process is made possible by welding with copper wire. Thanks to the touch-sensitive PLC control panel, all operator errors are eliminated. Technical Specifications: Gbodpfx Ahehcr H Sj Hsg Power supply: 45kw / 380V Range of processed sheets: 0.5 / 1.0mm Mat diameter range: 100-1250mm Working length: 1250mm Working speed: 2-8m / min Air consumption: 1.5lt / min Cooling: mini chiller as an option

Condition: excellent (used), Year of construction: 2009, Technical Details : Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) 38 m/min (diagonals) Carrier types that can be produced: KT KTS Gedpjrn N Efefx Ah Hjbg Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition !

Condition: excellent (used), Mini FlowPack SVD – a unique device on the market for packaging both individual items and bulk components such as screws, parts, etc. The machine is equipped with a special loading funnel and a film roll holder. It forms a bag from the film, seals the side and top, enclosing the product inside, while simultaneously preparing the next package. Make-Fill-and-Seal Bagging Machine This is a manual, vertical flow-pack type packaging machine, designed for producing, filling, and sealing bags in a three-step process. It is ideal for packaging seeds, granules, screws, machine parts, and other solid loose goods (not suitable for powders like flour). The machine uses polyethylene film with a recommended thickness of 40–60 µm. The resulting bag has a width of approximately 160 mm and a length of 50–180 mm. Operation steps: The bag is formed from a roll of film placed on the machine The bag is filled through a dosing chute Gbsdpfx Ahsxfvk To Hjg Sealing and cutting of the filled bag occur in a single step ✅ End-of-sealing audible signal ✅ Lightly used Model: SVD-160/190 – Technical Specifications Power supply (V/Hz): 230 / 50 Installed power: 0.18 kW Bag width: ~160 mm Bag length: 50–180 mm Seal width: 4 mm Sealing time: 0.1 – 1.6 s Max film thickness: 0.06 mm Film roll width: 400 mm only Net weight: 30 kg Machine dimensions (L x W x H): 500 x 500 x 650 mm

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary Godpfswf Rgrsx Ah Hjbg welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, functionality: fully functional, Good day. For sale is a used Merkle TIG 254 DC. Gjdpfxexr Dkno Ah Hobg A new inspection has been carried out, with the following components replaced: The circuit boards The AC fan The solenoid valve The red quick coupling The blue quick coupling The coolant

Year of construction: 2024, condition: new, Parameter: JSW-2000 Laser power: 2000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total energy consumption: 10.6KVA/48.3A Average power consumption: 6.4KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Gedjtwzxujpfx Ah Hsbg Height 800mm, Width 540mm, Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 6mm Carbon steel 0.5 - 6mm Galvanized sheet metal 0.5 - 6mm Aluminum 0.5 - 5mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - OD6+ safety glasses - Welding mask OD8+ - Warranty 24 months

Condition: good (used), machine/vehicle number: 75804, Welding current range AC Tig: 7 - 390 A Welding current range direct current Tig: 6 - 230 A Electr. connection: 380 V, 45 A Gbsdpsb Nv Irefx Ah Heg space requirement: 1100 x 600 x 1370 mm

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 Gbsdpjqy Ek Asfx Ah Hog 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm Gsdpfxewf Rg Eo Ah Hobg The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Year of construction: 2024, condition: new, Parameter: JSW-1500 Laser power: 1500W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity:%: 10 - 90% Positioning: laser pointer (red dot or line) Gbedpstwzhvsfx Ah Hog Protective gas: nitrogen / argon / oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total power consumption: 8.2KVA/37.3A Average power consumption: 4.9KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 5mm Carbon steel 0.5 - 5mm Galvanized sheet metal 0.5 - 5mm Aluminum 0.5 - 4mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Condition: used, Welding current at 25% duty cycle: 250 A Welding current at 100% duty cycle: 110 A Godswvgg Njpfx Ah Hobg Welding current continuously adjustable: 5 - 250 A Electrical connection: 380 V Space required: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 underwent a mechanical overhaul.) The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Gbjdpfxoryv S Uj Ah Hog Increment: 20mm – 200mm. Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm also wired.) Energy demand: 14 kVA (max) Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with Gbsdpfx Aswf Rgxeh Hog simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: excellent (used), Year of construction: 2004, Technical Details : Year of manufacture: 2004 The mesh max. width: 2200 mm Mesh density: 20 welding heads in arbitrary distribution (40 heads are also possible) Increment: 20mm - up to 200mm Wire thickness: 1.6mm-3.0mm (max 550Nnmm) Energy requirement: 8 kW Weight: approx. 10 tons Drive: digital servo, control (PLC).. Stepless regulation.. Gbedporyv Sisfx Ah Hog Accessories: manual