Used Welding Fume Extractor for sale (6,163)

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Kodpfx Ajxf Up Ijabjnc

Year of construction: 2023, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 11124, Welding fume extraction unit from "reder systems". Dimensions (L-W-H): 1700x900x2300 mm, air flow rate: 4000-6000 m³/h. Includes piping and 8 extraction arms for equipping 8 welding stations. The system is dismantled and ready for transport. Ksdpfx Asxl Dpqeabsnc

Condition: excellent (used), IVAT Air FTower 5000 m³/h – Welding Fume Extraction Unit Year of manufacture: 2017. The system is fully operational and has only 1,676 operating hours. It is ideally suited for filtration in industrial welding halls as well as other technological processes in metalworking. ⸻ Technical Data • Machine type: IVAT Welding Fume Extraction Unit • Model: IVAT Air FTower 5000 m³/h Filter Tower • Input voltage: 400 V • Total height: 2,900 mm • Filter area: 80 m² • Extraction capacity: 5,000 m³/h • Fan output: 5.5 kW • Filter cartridges: 4 pcs • Additional fine filter: Filtration class F9 • Dust collecting container: 100 l • Noise level: 75 dB(A) • Degree of filtration: > 99.6% ⸻ Special Features & Operation • Layered ventilation principle: Contaminated air is drawn in at the top, filtered, and draft-free air is discharged at floor level—precisely where personnel are located. • Wide 270-degree airflow ensures optimal distribution without draughts ( Knjdpoxk Trfofx Aabjc

Condition: used, Spray enclosures, Paint fume, Used equipment Knjdpfew Tt Tvox Aabec Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Overall dimensions: Width: 1500 mm Depth: 2550 mm Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW

Condition: good (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, Plymovent Diluter – Welding Fume Extraction System The Plymovent Diluter is a stand-alone air purification unit specifically engineered for welding workshops. Unlike traditional ducted ventilation, the Diluter recirculates and cleans air within the workshop, eliminating the need for external ducting. Clean, filtered air is discharged horizontally from overhead modules, establishing an optimal airflow pattern that continuously dilutes and removes welding fumes from the operators' breathing zone. Key specifications & features: - Airflow capacity: specifically designed for medium to large-scale welding workshops - Installation: Stand-alone unit – no ducting or complex extraction system required - Filtration: Fitted with high-efficiency filter cartridges, replaced at prescribed intervals - Operation: Automatic fan control with uniform horizontal air distribution - Maintenance: Serviced by the official importer, regular filter replacement ensured Kodpfexf Iqrjx Aabenc - Construction: Robust industrial-grade build suited for continuous operation Benefits: - No investment needed for expensive ductwork or ventilation installation - Ensures a healthier and cleaner working environment for welders - Compact footprint, easily integrated into existing workshop layouts - Supported by Plymovent’s expertise – a Dutch manufacturer specializing in welding fume extraction systems globally The offered unit is in excellent condition, fully serviced, and ready for immediate use. Filters were changed one month ago.

Condition: like new (used), functionality: fully functional, Equipment: type plate available, Dust Hog Duster SG 801-100 dust extraction system in mint condition. The system was only used once for a test run; otherwise, it is unused and in excellent condition. Power: 1.5 kW Flow rate: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Knedpfx Aov Iyybsabsc Shipping available for €120. #8095

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Airtower, overall weight: 1,480 kg, total width: 1,756 mm, total height: 3,643 mm, Fan power: 3 x 3.9 kW Motor: 400V 50Hz Weight: 1,480 kg Year of manufacture: 2017 Operating hours: 14,783 h 2 identical Airtower units available, price is per unit. Knedpfx Aasv N U Tlebec

Condition: good (used), Year of construction: 2016, operating hours: 6,041 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2016 Operating hours: 6041 Filter cleaned with a microprocessor controller with compressed air pulses during operation, which ensures high efficiency of the device. Low demand for compressed air thanks to the "Power-Spray" system The central Filtercube filter ventilation device equipped with cartridge filters is an ideal solution for almost all problems in the area of fume and dust filtration. Fan on the clean side, which reduces the risk of explosion to a minimum. Application: central exhaust system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general filter ventilation of the hall (push-pull system, displacement system) Ksdpfx Astpvcyoabonc extraction system in combination with an exhaust table extraction system for grinding non-explosive materials Parameters: Fan in a sound-absorbing enclosure with a power of 3 kW. Capacity 4000 m3/h Negative pressure 3000 Pa Inlet diameter: 315 mm Filtration surface: 50 m2 control cabinet technical documentation Possibility to order new filter inserts tailored to the customer's needs.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Welding fume filter, mobile, BGIA-certified, hose version with one extraction arm, 3.0 m, outer diameter = 150 mm Ksdpfxjwc Un Ij Aabenc

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Price: On request Filter-area: 228m2 Capacity: 15.000 m3/h Kodpowrr Htsfx Aabjnc - Year: 2014 - Documentation available: No - CE marking present: Yes - Serial number: 22653 - Control type: Herding MP 12 - Control: CNC - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, machine/vehicle number: 950144105510003, Ref. no. 25044 Welding Fume Filtration Unit // Grinding Dust Filtration Unit Technical Data Knodpjwgd A Ajfx Aabjc - Upright design for filtering welding fumes and grinding dust - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with chrome and nickel content over 30% - Exhaust air can be directed into the workspace (e.g., for heating) or vented outdoors - TEKA control system - Airflow volume up to approx. 5,000 m³/h - Max. static pressure up to approx. 3,000 Pa - 4 BIAM filter cartridges - Cleaning type: pulse jet with separation efficiency > 99% - Separate control cabinet - Connection: 400 V / 5.5 kW - Required installation space for filter cube: approx. W 850 x H 3150 x D 850 mm - Weight: approx. 380 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, volume flow: 1,000 m³/h, pressing: 10,000 Pa, power: 5.5 kW (7.48 HP), TEKA Filtercube 4N 1000 MV filter extraction system, built in 2017, with pre-filter. Welding fume extraction, room filter, and laser extraction. Motor power: 5.5 kW Flow rate: 1000 m³/h Max. pressure: 10,000 Pa Knodjv T A H Iepfx Aaboc Weight: 350 kg The system can be loaded with a forklift for transport. #8336

Condition: new, Year of construction: 2024, The OS 3008 welding extractor is ideal for extracting smoke and fumes generated during welding, polishing, cutting or grinding rare precious metals. It can purify large amounts of harmful metal particles suspended in the air. This machine is characterized by high purification efficiency, low noise emission and takes up a relatively small area. It is adapted for extraction during arc welding, carbon dioxide, MIG/MAG method, gouge arc, welding in the gas environment. Suction power: 3000 m^3/h These extractors are equipped with high-performance filter inserts, distinguished from conventional filters by the presence of a PTFE (Polytetrafluoroethylene) membrane layer. In conventional filters, the length of the fibers of traditional filter materials such as cotton, satin, paper and other cellulose fibers is from 5 to 60 µm. Soot particles contained in the extracted smoke can remain inside the filter, blocking the filter element. When the blockage becomes too large, the ash cannot be effectively removed from the filter element, the air resistance increases and the gas flow decreases. As the filter becomes more contaminated, the filtering efficiency drops dramatically. Our filter contains a PTFE membrane layer, the fine structure of which blocks microscopic dust particles. These particles block the dust layer on the surface of the filter material. Most of the dust particles are blocked on the outer surface of the filter, not penetrating the filter interior. Over time, the particles can be removed from the filter by the flow of purified, compressed air. Air volume (m^3/h) 3000 Pressure (Pa) 2000 Kjdotu H N Hopfx Aabonc Filter efficiency (%) 99.9 Power (kW) 3 Filter area 30 Filter size 700 x 750 x 1700 mm Voltage (V) 380 Weight (kg) 90

Condition: used, Year of construction: 1994, suction capacity: 1,300 m³/h, negative pressure: 4,800 Pa, Dust extraction unit, welding fume extractor, self-cleaning pneumatic vacuum filter by KELLER. Suitable for plasma, laser, sandblasting, soda blasting and any type of dry dust. The fan is installed after the filter on the clean air side, minimizing the risk of explosion initiation. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Fan power: 3.3 kW Inlet diameter: 250 mm Capacity: 1300 m³/h Vacuum: 4800 Pa Knsdpfew I S Dvjx Aabec Dimensions: Height: 3.00 m Width: 1.45 m Depth: 1.00 m Weight: 700 kg Stock no.: 1028

Condition: good (used), Kemper 82150101 Welding fume extraction Knjdsxbfuyjpfx Aaboc

Condition: new, Never used Year of production: 2017/2018 Quantity: 5 pieces Never used Year of production: 2017/2018 Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Knjdpfx Aaotu Udisboc Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Noise level - 70 dB(A)

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: Knodpown Egrefx Aabec - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Kjdpfjicic Hex Aabsnc Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Kedpeu Hlppefx Aabsnc Ready for use.

Condition: good (used), Year of construction: 2002, functionality: fully functional, suction capacity: 1,300 m³/h, negative pressure: 4,800 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter KELLER VARIO T. Suitable for plasma, laser, sandblasting, soda blasting and all kinds of dry dust. The fan is located after the filter on the clean side, which reduces the risk of explosion to a minimum. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Kjdpfx Asvu Rylsabsnc Fan power: 3.3 kW Inlet diameter: 315 mm Capacity: 1300 m3/h Vacuum: 4800 Pa Dimensions: Height – 2.05 m Width – 1.02 m Depth – 1.60 m Weight: 700 kg

Condition: excellent (used), Year of production: 2017/2018 Kodpfx Ajtvf Ensabsnc Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Noise level - 70 dB(A)

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Knedpfjmquwqjx Aaboc Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: used, Year of construction: 2012, filter area: 80 m², suction capacity: 10,500 m³/h, negative pressure: 3,800 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter by ULMATEC. Suitable for welding, grinding, sandblasting, and all types of dry dust. Equipped with cartridge filter elements. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Designed for continuous operation. Brand: ULMATEC Model: IRF 80-4-4/7.5 MD Year of manufacture: 2012 Fan power: 7.5 kW Knsdpsw Hrnmefx Aabsc Maximum capacity: 10,500 m3/h Maximum vacuum: 3,800 Pa Filtration surface: 80 m2 Stock No.: 0950

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Knjdpfx Aaju S Tfgebjc Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Max efficiency 7500 m3/h Filtration surface 250 m2 12 filter inserts inlet diameter - 315 mm Knedpfx Aewgknxjaboc Dimensions: filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m stock no.: 0988