Used Welding Fume Extractor for sale (6,159)

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 Kedpfsu T Hrpox Aabsnc ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: Kedpfxoxabm Ne Aabjnc - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: used, No. 04492 Mobile extraction unit / Mobile dust extractor with fine dust filter cartridge Bernardo DC 400 Used Air flow rate 2520 m3/h High air flow rate due to large filter surface Including cleaning brush for manual filter cleaning Effective filtering of finest particles Filter surface 4 m2 Max. negative pressure 1800 Pa Suction connection diameter 1x 130 mm / 2x 100 mm Chip bag capacity 300 l Idle speed 2950 rpm Sound pressure 87.1 dB Motor output power S1 100% 1.5 kW (2.0 hp) Voltage 400 V / 50 Hz With dust protection housing self-construction No further documentation available Transport dimensions approx. 1100 x 600 x 2100 mm LWH Weight approx. 75 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Knjdpfxexn Tlyj Aabsc Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), 1 MIG/MAG welding machine Knodpfxjxpf N Te Aabjc Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: good (used), functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 900 mm, total length: 1,600 mm, Höcker Polytechnik VACUMOBIL EA 160 Self-cleaning Dust & Chip Extractor Specification: • Condition – used, after inspection • Manufacturer – Höcker Polytechnik • Model – VACUMOBIL EA 160 • Turbine motor power – 3.45 kW • Filter self-cleaning mechanism Knedpfx Aaexph Dajbsc • Turbine inlet – dia. 160 mm • One collection bin for dust/chips • Automatic mode for extractor start synchronised with machine • Overall dimensions – 160 x 90 x 200 cm (L x W x H) Additional information: • Good, factory technical condition • Photos show the actual condition of the item for sale • Possibility to switch on and test the device on site

Condition: ready for operation (used), Welding positioner, turning table, rotary work table, used machine Manufacturer: Heinrichsglück Type: TB 10 E Overall dimensions: Width: 2300 mm Depth: 3100 mm Knedpfxexk Rt Ts Aabec Height: 2500 mm Weight: 10,000 kg Year of manufacture: 1984 Table size: 1800 mm Load capacity: 10 tons

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Knodpeu R S A Rjfx Aabsc Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: excellent (used), functionality: fully functional, dust, chip extraction fan 18.5kw 8700m3/h 4940Pa centrifugal fan. manufacturer: Klima Celje air flow:8700m3/h Knsdpfx Ashu Aw Hoabec pressure:4940Pa motor power:18.5Kw 400v 50Hz speed: 2930 impeller diameter:700mm suction opening:250mm pressure side chimney:440 mm overall dimensions:800x1200x1500mm weight:ca 375kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Kodpfoxn Tilsx Aabenc Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Kedpjw Snqmsfx Aabsnc Year of manufacture: 1994. Automatic annealing temperature control. Welding strip up to 100 mm. Bimetal strip up to 80 mm. Connection: 400 V. Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Operating instructions and packing included.

Year of construction: 1992, condition: good (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Manufacturer: Commercy Soudure, welding rotating device swiveling Kjdpfx Aoq Ei A Teabonc -Type: PM 250 -Load capacity: see photo nameplate -Control: with foot pedal -Three-jaw chuck: Ø 314 mm, bore Ø 100 mm, base plate Ø 600 mm -Speed: max. 3 rpm right/left rotation -tiltable: via crank -Transport dimensions: 1190/720/H900 mm -Total weight: 267 kg

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Manufacturer: Piovan Type: — Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Knodexh Ammjpfx Aabec Manufacturer: Siemens Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Knedpoxnqnxjfx Aabsc

Condition: ready for operation (used), Dust and mist extractor DeWalt model DW60 Knsdpfxjxdwn Dj Aabec

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Knedoxnqaujpfx Aaboc Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 04986, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obliges timely collection between 01/12/2025 and 05/12/2025! MACHINE DETAILS Electrical data Operating voltage: 230 V Frequency: 50-60 Hz Dimensions & weight Dimensions (L x W x H): 700 x 450 x 1,000 mm Weight: 150 kg Kodpfx Aaoxnl S Ssbonc EQUIPMENT Powder-actuated stud gun Workshop cabinet with matching accessories

Condition: excellent (used), Year of construction: 2010, Extraction / Mobile Dust Extractor Vacumobile EA160 Machine in excellent condition – very little use – Extraction diameter: 160 mm Year of manufacture: 2010 Weight: 287 kg Rated airflow: 1500 m³/h Maximum airflow: 2750 m³/h Kjdpfx Aaexpkftsbonc Motor power: 3 kW Automatic motor-driven cleaning: 0.18 kW Location: ex stock 54634 Bitburg – immediately available –

Condition: like new (used), functionality: fully functional, load capacity: 8,000 kg, total height: 1,200 mm, total length: 2,900 mm, total width: 1,800 mm, type of input current: AC, table width: 1,200 mm, rotary table diameter: 1,200 mm, overall weight: 3,300 kg, height adjustment type: electric, table load: 8,000 kg, pivoting range: 135 °, torque: 8,000 Nm, Welding Positioner NewFiro 8000 HHT A powerful and reliable solution for heavy-duty welding applications. The NewFiro 8000 HHT combines strength, precision, and flexibility making it ideal for rotating and positioning large workpieces with ease and accuracy. Technical Specifications: Load Capacity: 8,000 kg Table Diameter: 1,200 mm Table Height: 1,250–2,050 mm (adjustable) Tilting Range: 135° Rotation Torque: 8,000 Nm Tilting Torque: 26,000 Nm Ksdpfxexpxwqo Aabonc Rotation Speed: 0.04–1.2 rpm (variable) Dimensions: Length: 2.9 m Width: 1.8 m Height: 1.2–2.0 m Weight: 3,300 kg Built for performance and durability, the NewFiro 8000 HHT ensures smooth operation and precise contro. The perfect choice for demanding welding and assembly tasks.

Condition: good (used), 1 used TIG welding machine Make: Rehm Model: Invertig 260 ACDC 260 AMP 400 Volt ACDC 2/4 stroke High-frequency start Bi Level Current reduction Suitable for welding steel, stainless steel, and aluminum Includes TIG torch, ground cable, gas hose, and foot pedal Knodpfoxnql Rsx Aabjc

Condition: good (used), Ground cable for protective gas device, electrode device -Version: Dinse plug -Length: 15 meters -Weight: 12.6 kg Knodpeghm T Esfx Aabjc

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Ksdpfxjxnprco Aabsnc For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2022, functionality: fully functional, Brand New Nimo-KG SKV 300 C4 meat bin lifter year of construction 2022 Tipping height 183 cm. Knedpfoxl Tvgsx Aaboc

Condition: used, Year of construction: 1992, sheet thickness steel (max.): 4 mm, sheet thickness (max.): 4 mm, outer diameter: 60 mm, pipe diameter (max.): 60 mm, FEEDSTOCK STEEL STRIP .. sheet thickness max.: 4 mm .. sheet thickness min.: 0.8 mm Kjdpfx Asxm Rvgeabsnc PRODUCT (PROFILE, TUBE) .. external diameter min.: 24.9 mm .. external diameter max.: 60 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 4 mm LINE CHARACTERISTICS .. Forming Process: rollforming .. welding process: HF inductive .. sawing process: travelling system consisting of: - large coil reel - Bandschweisseinrichtung - optional: horizontal band loop - side planer - forming unit - HF welding unit - units for outside scarfing, inside scarfing - each without impeders, tooling - cooling section - calibration unit with alternative calibration station for ovals, polygons - flying saw - chip blow unit - hexagon bundling- and binding unit optional roll-sets available for: forming section: 26,30, 32, 36, 38, 40, 44, 46, 52, 60 mm calibration section: 25, 26, 29.5, 29.89, 30, 32, 33, 33.4, 33.5, 33.7, 34, 35, 36, 37, 38, 39, 40, 42.4, 43, 44, 45, 46, 50, 51, 51.5, 57, 58, 60 mm without drawints

Condition: good (used), 1 used shielding gas welding machine Brand: Rehm Model: Mega Arc 300-4 Technical data Knjdoxnqkaepfx Aabjc Continuously adjustable current range [A]: 25-300 Duty cycle at 25°C (40°C) and Imax ambient temperature [%]: 50 % Welding current at 100% duty cycle (40°C) [A]: 220 Open circuit voltage [V]: 68 V Power supply [V]: 3 x 400 Continuous output at 100% duty cycle [kVA]: 7.9 kVA Fuse (slow-blow) [A]: 16 A Power factor [cos phi]: 0.98 Insulation class: H Cooling type: AF Torch cooling: Gas Protection class: IP 23 Weight [kg]: 122 kg Dimensions LxWxH [mm]: 1030 x 605 x 845 Wire feed rollers: 1.0 mm

Condition: used, Year of construction: 2013, sheet thickness steel (max.): 4 mm, sheet thickness (max.): 4 mm, outer diameter: 51 mm, pipe diameter (max.): 51 mm, FEEDSTOCK STEEL STRIP .. sheet thickness max.: 4 mm PRODUCT (PROFILE, TUBE) .. external diameter max.: 51 mm specifically suitable for the welding of USM furniture tubes -Large reel without storage -Strip welding device -Side planer -Calibrating roll stand -Forming unit -HF welding unit THERMOTOOL -Unit for scraping without tools Ksdpfx Aaexm Rvaebonc -Cooling section -Calibrating unit -Flying saw -Removal section for manual removal -Roller sets for 19, 20, 25, 35.9, 36, 37, 40.8, 41 mm -Various accessories and machine-specific spare parts -Documentation and maintenance logs -CE declaration