Used Wheel Balancing Machine for sale (81,021)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. Ledpfx Ahjyv Iqvjtehk CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm work piece width:150 mm workpiece height:210 mm spindle speed max.:2800 U/min distance grinding wheel - table:280 mm magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m Lhjdpfx Ahjcxxlrotjk

Condition: good (used), functionality: fully functional, Manufacturer: HOFMANN Type: NG-1 Lodpfx Aszada Tohtehk Machine No.: 922472 Max. disc diameter: 320 mm Max. loading weight: 20 kg

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Lhjdowcg Elepfx Ahtok Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 101402, type of input current: three-phase, input current: 50 A, input frequency: 50 Hz, input voltage: 400 V, power: 20 kW (27.19 HP), CEMB ZB200/TC/TA rotor balancing machine in good working condition. Used for rotors in sizes 160-250. Fully operational. Last test on 17/04/2025. Lhodpfx Aheygbfgetok

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RFVD 0018, Used fully fuctional Schenck RoTec Distec Balancing Machine The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Technical data: Lhsdpfx Aeyxwmlohtjk - Max. rotor diameter: 500 mm - Max. rotor height: 150 mm - Max rotor weight: 30 kg (option for 70 kg) - Countinuously variable balancing speed: 600-1000 1/min - Measurement uncertainty: 4 gmm - CAB 870 touchscreen operation - Automatic drilling unit - Weight approx: 2200 kg - Space requirement approx: W1200 x D2700 x H1900 mm

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Lhedpfxewgnu Ns Ahtek Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm Lhodpfx Ahevnmnrstjk peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 15 t Ljdpfx Ahsizldxjtshk

Condition: as good as new (ex-display), This compact balancing machine features a vertical axis of rotation and has a load capacity of up to 50 kg. Thanks to its compact design, the machine takes up relatively little space and does not require a foundation, allowing it to be easily moved to the desired location. The balancing process is controlled by the latest “ROTORTEST 9.5” measuring system with dedicated software, which includes workshop programs that convert imbalances into a convenient correction method, such as drilling or milling parameters. The vertical axis balancing machine is recommended for balancing rotors mounted on a bore, e.g., fan rotors, pulleys, flywheels, tools, pumps, and many other components. The greatest advantages of this type of balancing machine are its universal application, the possibility of using dedicated, self-centering fixtures that provide high measurement accuracy, and a simple and fast calibration method, the so-called "manufacturer calibration," which does not require calibration runs before starting measurements. The entire procedure simply involves entering the basic parameters of the rotor into the program. Lhjdjf Nvwpepfx Ahtok This machine is an excellent choice for balancing individual pieces of various rotor models, and especially for balancing large series of the same rotor model. Parameters: Maximum rotor mass: 50 kg Maximum rotor diameter: 650/850 mm Maximum rotor height: 500 mm

Year of construction: 2024, condition: as good as new (ex-display), Rim Balancing Machine: - Automatic clamping of a wheel hub with a heavy duty pneumatic clamping chuck - Automatic brake and wheel positioning - Fast balancing cycle time Lhedpfxot Tuqbs Ahtek - Made of well-known brands heavy duty components - Fast tool changeover time - Servomotor as a spindle drive motor

Condition: new, Year of construction: 2026, functionality: fully functional, Performance Data: Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Lsdpfx Ahsha Eh Hetjhk Software: Latest generation GWDress-Studio with automatic AI measurement included

Condition: used, Year of construction: 1995, documentation vorhanden Ledpfx Ahsyhrcrstohk dimensions of the machine ca. 4,10 × 1,20 × 1,40 m

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Lhsdpfxeubbrte Ahtsk Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money!

Condition: used, Year of construction: 1961, workpiece weight 300 kg workpiece length 1200 mm diameter 1300 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Lhedpfxey Swhvo Ahtok About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Grinding wheel dressing machine for dressing grinding wheels up to a diameter of 450 mm Easy to operate, robust, and precise Our grinding wheel dressing machine offers an unbeatable combination of ease of use and exceptional stability. The solid granite base ensures maximum precision and durability, while the user-friendly operation maximizes efficiency in your production. Lsdpfx Ahsy Anyketehk While you continue production on your tool grinding machine, our dressing machine saves you time – and therefore reduces costs.

Condition: used, used Michael Deckel S11 - fully functional Ledpjx Hyn Iofx Ahtshk

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 50 kg, total width: 400 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 950 kg, Equipment: documentation/manual, The KKT Universal BA & KA balancing machine is a horizontally operating industrial balancing machine for precision balancing with belt drive and cardan shaft drive. It is suitable for balancing motor armatures of various sizes, as well as shafts, fan impellers, grinding wheels, cardan shafts, and similar rotors. We offer this machine in various versions, both as a used machine and as a new machine built to meet customer requirements. Please feel free to contact us - we will be happy to provide you with comprehensive advice and support. Lsdjf Sqiqspfx Ahtjhk

Condition: used, Year of construction: 2018, functionality: unexamined, input current: 10 A, input frequency: 50 Hz, overall weight: 1,200 kg, CNC Shaft Inspection and Balancing Machine Ljdpfx Aeyhq Nqehtjhk Maximum shaft length: 800 mm 230V 50 Hz L = 1300 mm; W = 1000 mm; H = 1300 mm

Condition: new, Year of construction: 2025, Centrifugal wheel system, suspended monorail type 1.15 2T Dimensions: D=1000mm, H=1500mm, payload: 500kg, with 2 centrifugal wheels, 7.5kW each, including filter system and dust collection filter. Ledpfodrr U Sjx Ahtohk For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts.

Condition: new, Year of construction: 2025, Centrifugal wheel rotating table system D = 1500 mm, 2 x 7.5 kW centrifugal wheels Lhjdpfx Aodtq Anjhtok If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are based on manufacturing at the Grossenlueder site, which has been in operation since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: new, Year of construction: 2025, Trough belt, impeller wheel, shot blasting system, 11 kW, directly driven impeller turbine with 8 throwing blades. Belt width 1000 mm and diameter 900 mm. Lhjdpfx Aehvikujhtek

Condition: not inspected (used), Year of construction: 1970, Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. Ljdpfx Ahshikdwjtehk For rebuilding, because the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: new, For sale is a Dittel MBA 2000 Mechanic balance machine. The item is new and fully functional. Item number: F20367 Serial number: 356-0629 Lhjdpfx Aepky U Eshtok Part No.: 816/118 B Shipping or pickup can be arranged at any time. If you have any further questions or are interested just contact me.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Lhedpex H Aa Tefx Ahtek Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer.