Used Wire Drawing Line for sale (20,026)

Condition: used, Year of construction: 2000, table length 350 mm Iijdpfjxmk Hlox Aabsh table width 220 mm ampere 18 A Control FANUC 18i

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Iisdpfx Aaoh U Nzpobeh Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: like new (used), Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, total length: 2,600 mm, total width: 2,340 mm, GF Machining Solutions CUT P550 Pro Year of manufacture: 2022 Uniqua Control Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Integrated Collision Protection (ICP) on all 5 axes Cutting speed of 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.10 to 0.33 mm (with WIRE100 option) Including Taper Expert option for 0.25 mm wire Including AC-Setup 3D option Including wire chopper option Including horizontal manual annealing option Including automatic central lubrication option Including active thermal stabilization option Including SparkTrack option Iiodpfx Ajxl Suueabeh Including iWire option Including kit for 0.10 mm wire Overall system dimensions: 2,600 x 2,600 x 2,340 mm Total system weight: 3,300 kg The machine will be cleaned, serviced, and fully tested for all functions by us upon order placement. You will receive a 6-month warranty on the machine. We would be happy to offer you commissioning of the machine.

Condition: used, Dimensions (LxBxH): 160 x 114 x 165 cm Price: On request - Main motor power [kW]: 9.0 - Arbor saw blade diameter [mm]: 65 - Documentation available: No - Transport dimensions: 1600mm x 1140mm x 1650mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Iiedow Rd Tuepfx Aabjh

Condition: used, Year of construction: 2011, OMET 2M2B 400T Automatic Coil Feeder Press Line; Including: Omet Press; Asservimenti Resse SMC70 Decoiler; Asservimenti Resse AP6 1150 C Straightener; Asservimenti Resse CRH 1150C Electronic Feeder Iiedpfxow U N R Tj Aaboh

Condition: good (used), Year of construction: 1995, type of input current: three-phase, KUPER SHRINK TUNNEL DUPLEX Manufacturer: KUPER Type: ST/I-1400 Year of construction: 1987 Serial number: 594 Working width: 1300 mm Role Holder: Yes Electrical connection: 400 V Overall size, H: 3500mm Overall size, W: 2350mm Overall size, M: 1850mm Vv 2 blow-off units Power: 59kW Temperature range 230°C Duplex 2100/650 film input station vv film holder Swivel arm with chain hoist sealing rod Length 2100mm "Siemens" control panel Overall Size: 3000*2000*2300mm Ijdpekn Rz Hjfx Aabsih További információ erről a forrásszövegrőlTovábbi fordítási információhoz forrásszöveg szükséges Visszajelzés küldése Oldalsó panelek

Condition: used, Auction item. Log house wall production line is in working condition. Ijdexmhr Sjpfx Aabsih Sold as seen in photos and video.

Year of construction: 1980, condition: ready for operation (used), Fully Integrated Concentrate Factory (Tomato Paste – Mango & Guava) Iiodpoxdn R Aofx Aabsh 🇮🇹 Manufacturer: Ing. Rossi Catteli – Model Annetto – Parma, Italy ⚙️ Capacity: 300 tons of Tomato/day 🛠️ Equipment Model: 1980 ✅ Fully refurbished in 2024 (Electrical + Mechanical – Like New) 🔸 Production Line Includes: Receiving & sorting unit Hammer + Mono Crusher (12 tons/hour) 3 Pulper finishers 14-tube pre-heater Storage tanks Triple-effect evaporator including 3 pumps Cooling Condenser Cooling tower All pumps and motors European brand Full PLC automatic control German automatic pneumatic valves Line located in Egypt Evaporator can be sold separately WhatsApp:

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Generator Size: 600 x 650 x 1765 mm Iodpfx Aexfcpvsabjih This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: excellent (used), Meren Jonson Multi-Saw with Automation Powered roller infeed with centering Roller outfeed with side pusher Rubber crawler feed system Ijdsxm Sczspfx Aabjih Press rollers under the shaft for cutting short pieces Smooth feed speed adjustment Maximum cutting height: 100 mm Supported saw shaft Main motor: 75 HP (56 kW) Planer Double-sided planing (top and bottom) Working width: 610 mm Working height: 152 mm Bottom motor power: 15 kW Material removal: 12.7 mm Electrically adjustable working height Maximum feed speed: 30 m/min Automatic lubrication system Total power: 50 kW

Condition: used, Wagner Cavity Enameling Line Gema with Opti Center Ijdpfx Asw U Ra Noabjih

Condition: excellent (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), operating pressure: 280 bar, Technical data baler: Manufacturer BOA Type 2040.S. 4V (6) 71.30 Year of manufacture 2002 Operating hours approx. 66,568 hours, as of October 2025 Effective pump running time 13,614 hours, as of October 2025 Number of bales pressed 139,167, as of October 2025 Pressing force main press 71 t Specific pressing pressure 9.0 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 45 kW Tying system 4-fold vertical, fully automatic Throughput rates for quality: Bulk density 20–30 kg/m³, throughput capacity up to 9 tonnes/hour Bulk density 40–60 kg/m³, throughput capacity up to 16 t/hour Bulk density 80–100 kg/m³, throughput capacity up to 21 t/hour Bulk density 100–150 kg/m³, throughput capacity up to 28 t/hour Bale weight up to 600 kg/bale, depending on material Hydraulic oil tank capacity 800 l Transport dimensions 10,020 x 2,060 x 3,250 mm (l x w x h) Machine weight press approx. 26 t Noise level <90 dB (A) Technical data for the chain belt conveyor: Manufacturer BOA Type 1500 HS 29° KTH 3000 *13625 * 1500 Year of manufacture 2002 Drive power 7.5 kW Length of feed belt 2,600 mm Length of incline belt 13,625 mm Length of gooseneck 1,500 mm Incline 29° Useful width 1,425 mm Overall height of conveyor belt 7,065 mm Height of side wall of feed belt, inside 500 mm Height of side wall of ascending belt, inside 800 mm Pit dimensions for conveyor belt 5,500 x 2,800 x 800 mm (l x w x d) Technical data for PET bottle flattener: Manufacturer BOREMA Type L 1600 Year of manufacture 2002 Suitable for returnable bottles with a capacity of 0.33 to approx. 2 litres Throughput approx. 50,000 PET bottles/hour Dimensions of feed opening 700 x 530 mm Drive motor power 11.5 kW Adjustment motor power 0.55 kW Pressure vessel 6–10 bar Ijdpfx Aajxmk Ivebeih Working pressure 3.5 bar Connected load 27.7 kVA Main fuse 3 x 40 AT Scope of delivery: 1 piece used baler BOA 2040.S. 4V (6) 71.30 10 pieces wire reel stands, without wire 6 pieces wire deflection stations 1 piece bale slider 1 piece chain belt conveyor BOA 1500 HS 29° KTH 3000 *13625 * 1500 1 piece BOREMA PET bottles flattener type L 1600 1 piece of BOREMA PSS ibor 12 non-contact personal protection system 1 piece of machine documentation The machines were used in a PET recycling plant for compressing sorted PET bottles. As part of the production plant, the machines were regularly maintained and are in good condition, ready for immediate use. Comments: The documentation (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) for the press is available. An inspection is possible by arrangement. We do not accept any liability for the technical specifications or any errors.

Condition: good (used), Code: 0188 Iedpow Ec Risfx Aabsih Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: Ijdsxmiirspfx Aabjih 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 4508-6389, On layout machine no10 Finger depositor not included (planned to stay) Included 2 planetary mixer MR150 and 3 mixer bowl lift Iiedpfx Aaoxl S Unsbeh

Condition: excellent (used), Stroke X-Y-Z 500 x 350 x 300 mm Workpiece dimensions 1050 x 800 x 295 mm Workpiece weight 1500 kg Iisdsxl A Aispfx Aaboh U+V-Axis +/- 21 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, Esimec Automatic 3 Presses Line Iedow U Rckepfx Aaboih

Condition: used, Year of construction: 2006, machine/vehicle number: M 91317, Decoiler Coil weight: 5 ton Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Leveller / Straightener Iedjuqd Udjpfx Aabsih Material width : 50 - 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: good (used), Code: 0008 Brand: ZAFFARONI Model: MLS 130 TR - CE Standard Multi-rip Saw for executing cuts and multiple grooves on strips, also with veneered surfaces and coated with various materials and it can be used, for example, for the production of prefinished parquet - CE Standard Features: Compact tubular steel structure Regulation system of the cutting and grooving depth, without changing the working table height with respect to the floor Advancement group of the workpieces through shutters, with opening by a pneumatic cylinder so to permit the tools change on the spindle Electronic adjustment of the advancement speed Workpieces input system through motorized belts and lifting rods Rear output pieces group through motorized belts Opening regulation system of the workpieces passage through the advancement group, according to the panels thickness Safety system for panels thickness control Tool-holder spindle of hardened and round steel, with anti-rotation locking, so to make easier the tools change operations; it is supported on one extremity by a double fixed support and on the other one by a sliding support, which can be removed for the setting / disassembling of the tools Technical data: Max workpiece length 1300 mm Isdpevtrk Nsfx Aabeih Min workpiece length mm 300 Min workpiece width mm 60 Max workpiece width mm 350 Min/max workpiece thickness mm 2/50 Spindle motor 22 Kw Tool-holder spindle dimensions Ø 80 x 1310 mm Spinde speed 4000 rpm Advancement speed from 5 to 30 m/min' (up to 30 pieces/minute of productivity) Working table height 990 mm Max tools diameter 275 mm - Blade bore mm 80 Projection of the tools from the working table, adjustable from 27 to 47 mm with tools Ø 250 mm or from 40 to 60 mm with tools Ø 275 mm max Max milling depth 12 mm with mills Ø 180 mm - 22 mm with mills Ø 200 mm Total installed power Kw 25 Suction port diameter mm 200 Compressed air 7/8 bar Machine dimensions mm 2100 x 2260 x 1500 h Machine weight 1850 Kg. approx.

Condition: used, Year of construction: 1962, Banbury Kneader / Mixer #3 with peripheral equipment Documented modifications / upgrades: Year Modification / Upgrade 1962 Gearbox upgrade Kneader III 1973 Carbon black weighing & dosing system for Kneader III 1981 Exhaust extraction system for Kneader III 1985 Batch-Off machine for Kneader 3 Iisdpfxsxb T T Rs Aabjh 1985 Temperature control unit for Kneader 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Kneader III 2007 Hose scale for Kneader #3 2008 Vibration measurement system Mixer III 2008 Column-mounted slewing crane for bale handling Mixer III 2009 Vacuum hoist system Kneader III 2010 CMS system for Mixer III 2013 Long-strip cutting device for Kneader III 2014 Slab feeder for Kneader III 2014 Overnose conveyor Kneader III 2014 2 × floor scales for Kneader III 2014 New control system for Kneader III 2014 Cooling register MUAFAN 1+2 – cooling line mill Kneader 2+3 2015 Monitoring system (Kneaders I–III) for CMS Kneader III 2017 Mixer body replacement Kneader III 2023 Rubber kneader III KSBI-L270 Control system: New control system 2014, CMS system 2010, DC Drive / Automax, PLC Batch-Off & Conveyor, AC Drives documented Maintenance / condition: Regular modernizations and upgrades documented 1962–2023 Accessories / options: Batch-Off machine, slab feeder, put-up conveyor, long-strip cutter, floor scales, bale handling crane, vacuum hoist system, carbon black silos & weighing system, extruder, roller die, roller head with conveyor, cooling systems (dip tank, cooling line, laydown), control systems (DC Drive, AC Drive, Automax, PLC)

Condition: used, Year of construction: 1994, machine/vehicle number: 940082, Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Iedpfxsuqc Hre Aaboih Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Condition: used, Year of construction: 2012, Year Modification / Upgrade 2012 Installation of Quadruplex Extrusion Line No. 02 for single tread production 2012 Foundation work for Quadruplex Extruder No. 02 2012 Installation of induction heating insert and die on Quadruplex Extruder No. 02 2013 Expansion of extrusion tooling for tread and sidewall production 2014 Two Siemens compact asynchronous motors 2017 New extruder screw (150 mm base size) for Quadruplex Extruder No. 2 2019 Closed-loop system upgrade (extended) 2021 Closed-loop system upgrade (extended) 2022 New 200 mm screw for Troester extruders Iiedpfjxb Uimex Aabsh Control system: Modern control and visualization units (control desks, operator panels) Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Maintenance / condition: Regularly modernized and upgraded from 2012–2022 Accessories / options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding equipment

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Ijdpfx Aaeuqfa Ijbeih Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, 700-1400 creels per line, pneumatic beaks Iedpexcnr Refx Aabsih

Condition: used, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Iijdpfjvg Iqxox Aabsh Feeding speed: 3 - 30 m / min Standard configuration Extended machine accessories Insertion aidLoop bridge