Used Wire Erosion for sale (3,543)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES Ksdpfxov Rfm Se Af Sond from 2001 Model: ROBOFIL 290 P 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Features: - Maximum part dimensions: 850 x 500 x 200 [mm] - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 - tank capacity: 300 [l] - generator: 10 [kVA] - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg]

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. Kedpfx Afemk S Sls Sjnd At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Kjdpfextwddjx Af Ssnd

Condition: good (used), Zip Wire closed spiral in spools Kjdpfx Afswunmbj Send 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: used, Module converter, electronic module Kjdefcl H Uopfx Af Send -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. Ksdpfsf Nku Rex Af Sond On the last three photos you can see plants of this design in operation.

Condition: used, Module converter, electronic module Knsdofcl H Ispfx Af Ssd -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg Knjdpeq Rxz Tofx Af Sod

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 25101.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Kedpfxjxrrbbo Af Ssnd Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Operating hours: 1,657 hours Battery: 48 v / 750 ah Options: - VNA truck - with wire guidance Condition: LIKE NEW!!

Year of construction: 2001, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 220 mm U/V-AXIS TRAVEL: ± 80 mm MAX  PIECE WEIGHT: 450 Kg Kjdpfxjrhl Iis Af Sond TANK SIZE: 895 x 650 x 220 mm TABLE SIZE: 600 x 400 mm DRAFT ANGLE / DRAFT HEIGHT: 20 °; 80 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,1-0,3 mm WEIGHT: 3000 Kg OVERALL DIMENSIONS: 1650 x 2125 x 2080 mm ACCESSORIES: ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT

Year of construction: 2012, condition: ready for operation (used), General Data Machine weight 3950 kg Measurements height 2220 mm Measurements depth 2395 mm Dimensions Machine Length 2225 mm Main Drive Number of axis 5 Movement X-Axis Movement 400 mm Z-Axis Movement 250 mm Y-Axis Movement 300 mm This 5-axis Sodick AG 400 L wire EDM machine was manufactured in 2012. It features a work tank of 850 × 610 mm, supports a maximum workpiece weight of 500 kg, and offers extensive travel with X-axis at 400 mm, Y-axis at 300 mm, and Z-axis at 250 mm. Wire diameters range from 0.15 to 0.33 mm with a feed speed up to 420 mm/sec. Consider the opportunity to buy this Sodick AG 400 L wire EDM machine. Contact us for more information. Kjdpfxsxx Dzmj Af Sond Application Types EDM

Condition: used, offer consist of: - control for stitching wire Horizon stitching wire control function: prevents the stitching wire is used up completely and must be threaded into the stitching head Kjdpfxju Srv He Af Sond - compatibel with: Horizon SPF-200A

Condition: used, x-axis 370 mm y-axis 270 mm z-axis 250 mm control Sodick LQ33W Ksdpfxsxx A Ixo Af Sond workpiece length 570 mm work piece width 420 mm max. workpiece weight 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, High-precision wire EDM machine at a special price! AGIECUT Excellence 2 Year of manufacture: 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Knsdpexx Tgxefx Af Sod Best achievable surface finish: 0.1 µm Ra Maximum cutting rate in cylindrical cut: 300 mm²/min Available wire diameters: 0.10 - 0.33 mm Including AGIE universal clamping frame Including AGIE Jogger handbox Including console with 4x USB ports Including AGIE-Setup 3D The machine has been cleaned, overhauled, and thoroughly tested by our technicians. We are also happy to offer commissioning and training on request.

Condition: used, Year of construction: 2015, functionality: fully functional, load capacity: 600 kg, total height: 900 mm, total width: 800 mm, total length: 1,200 mm, overall weight: 49 kg, Metal Wire Baskets with Solid Bottom Dimension: 1200x800x900 mm Material Weight: 48–49 kg/pc Wire & Mesh: Wire diameter 6.0 mm, mesh pitch 50×100 mm Solid Bottom: 0.8 mm thick steel plate Load Capacity & Stacking: Load 600 kg/pc in use, stackable up to 6 layers Quantity: 3,000 pcs. Ksdpfxsxwwfpe Af Ssnd

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Knodpfxsxx Uate Af Sed Weight: 3,000 kg

Year of construction: 2011, condition: ready for operation (used), Movement X-Axis Movement 600 mm Z-Axis Movement 300 mm Y-Axis Movement 400 mm Kjdpexx Dv Rsfx Af Sond This 5-axis Sodick AQ 600L wire EDM machine was manufactured in 2011. It features a large workzone with internal tank dimensions of 1135 × 890 mm, capable of handling workpieces up to 930 kg and 300 mm in height. It supports wire diameters from 0.15 to 0.30 mm and offers taper cutting of ±20° on 100 mm thickness. If you are looking to get high-quality EDM capabilities, consider the Sodick AQ 600L machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder Knsdpfx Afein Rn Aj Sed -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Year of construction: 2016, condition: ready for operation (used), This 5-axis FANUC ROBOCUT C600IB was manufactured in 2016, featuring a maximum workpiece size of 1050 × 820 × 400 mm and a weight capacity of 1000 kg. It includes XY table travel of 600 × 400 mm and Z-axis travel up to 400 mm. The machine supports a wire diameter range of 0.10 to 0.30 mm and is controlled by the FANUC 31i-WB system. Consider the opportunity to buy this FANUC ROBOCUT C600IB wire edm machine. Contact us for more information. Application Types Kedpfx Afsxxnhqo Sjnd EDM

Year of construction: 1995, condition: ready for operation (used), General Data Machine weight 3800 kg Measurements height 2220 mm Measurements depth 3200 mm Movement X-Axis Movement 370 mm Z-Axis Movement 250 mm Y-Axis Movement 270 mm Main Drive Number of axis 5 Dimensions Machine Length 3200 mm This 5-axis Sodick AQ 327 L wire EDM machine was manufactured in 1995. It features a table/work tank of 570 × 420 mm, supports a maximum workpiece weight of 500 kg, and offers a taper angle of ±25° for 80 mm cutting height. If you are looking to get high-quality precision cutting capabilities, consider the Sodick AQ 327 L machine we have for sale. Contact us for more information about this machine. Ksdpfx Asxxnd Eef Send Application Types EDM

Year of construction: 1991, condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Z-Axis Movement 270 mm Y-Axis Movement 350 mm This 3-axis Sodick A500L wire edm machine was manufactured in 1991. It features a 500 mm X-axis, 350 mm Y-axis, and 270 mm Z-axis, providing precise and efficient operations. If you are looking to get high-quality wire EDM capabilities, consider the Sodick A500L machine we have for sale. Contact us for more information. Knjdpfsxxnkljx Af Sjd Application Types EDM

Year of construction: 2014, condition: ready for operation (used), Main Drive Number of axis 5 Movement Knsdpfxoxxdqzj Af Sjd X-Axis Movement 400 mm Z-Axis Movement 230 mm Y-Axis Movement 300 mm This 5-axis Sodick SL400Q wire EDM machine was manufactured in 2014, featuring a 400 x 300 x 230mm work envelope and U/V axes of 90mm each. If you are looking to get high quality EDM capabilities consider the Sodick SL400Q machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2017, condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Z-Axis Movement 310 mm Y-Axis Movement 400 mm This 3-axis Sodick VL 600Q wire EDM machine was manufactured in 2017. It features X-Travel of 600 mm, Y-Travel of 400 mm, and Z-Travel of 310 mm. If you are looking to get high quality EDM capabilities consider the Sodick VL 600Q machine we have for tact us for more information. Application Types EDM Knedpfx Aoxxdtcjf Sjd

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 1200 kg Control Unit Brand FANUC Model 180is-WB Main Drive Ksdpfx Afoxxdwhs Send Number of axis 5 Movement X-Axis Movement 320 mm X-Axis Rapid Traverse 900 mm/min Y-Axis Movement 220 mm Y-Axis Rapid Traverse 900 mm/min Z-Axis Movement 255 mm Z-Axis Rapid Traverse 900 mm/min V-Axis Movement 120 mm V-Axis Rapid Traverse 450 mm/min U-Axis Movement 120 mm U-Axis Rapid Traverse 450 mm/min Workpiece Workpiece weight 500 kg Media Power consumption 13 KVA This 5-axis FANUC Alpha-0iC wire EDM machine was manufactured in 2007. It features a robust design with a maximum workpiece weight of 500 kg and a machine mass of 1.2 tons. It offers X, Y, U, V, and Z-axis strokes of 320 mm, 220 mm, 120 mm, 120 mm, and 255 mm respectively, all with high rapid traverse rates. Consider the opportunity to buy this FANUC Alpha-0iC wire EDM machine. Contact us for more information. Application Types EDM

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Kedpfexvty Hsx Af Sond Workpiece weight 1500 kg Additional Equipment Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM