Used Wood Chipper for sale (6,254)

Condition: excellent (used), Catalogue number: 7924 TECHNICAL DATA hopper top opening (L/W): 500x600 mm Ljdpoy R Dq Ijfx Aqvjrl hopper length: 2070 mm shaft width: 550 mm motor: 55 kW number of knives: 4 pcs outlet for shredded wood: rectangular 560/360 mm dimensions (L/W/H): 3950x1520x2820 mm weight approx.: 2500 kg – drum chipper – 4 knives on the shaft – additional built-in fan for chip discharge – condition: very good – used chipper Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Ljdey R Az Sopfx Aqvorl Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Lsdpfx Aqod E R D Sjvorl Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: new, Year of construction: 2024, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start Lrjdpfx Aed Hkqheqvjl - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2026, CORMAK LUP10T 10T 400V Log Splitter The compact vertical hydraulic CORMAK LUP10T is a new addition to the range, designed for efficient splitting of firewood and heating wood. The machine offers a splitting force of 10 tons, a 4 kW motor, and 400 V power supply, making it ideal for working with logs of various diameters and lengths. 🟠 Technical Specifications Model: CORMAK LUP10T Type: Vertical hydraulic log splitter Splitting force: approx. 10 tons Power supply: 400 V Motor power: 4 kW Maximum height: 1700 mm Minimum height: 1300 mm Width: 630 mm Depth: 900 mm Wedge depth: 180 mm Maximum log length: 650 mm Minimum log length: 150 mm Maximum log diameter: 450 mm Minimum log diameter: 80 mm Wheels: Rubber wheels Weight: 153 kg 10 tons of splitting force in a compact design — more powerful than typical 8T splitters while still easy to store and transport. 🔴 High Power in a Compact Design Ljdpfx Aey T E Iyoqvsrl The biggest advantage of the CORMAK LUP10T is the combination of high splitting force and compact construction. The splitter features an adjustable working height ranging from 1300 to 1700 mm and base dimensions of 630 × 900 mm, making it easier to position, store, and transport. Despite offering greater force than standard 8-ton models, the design remains compact and user-friendly. Key Advantages ➡️ Approx. 10 tons of splitting force: efficient splitting of larger and harder logs ➡️ Compact design: easier storage and comfortable operation in limited spaces ➡️ 4 kW motor: stable performance when working with demanding materials ➡️ 400 V power supply: well suited for more intensive workshop and farm use ➡️ Maximum log diameter of 450 mm: capable of handling large firewood logs ➡️ Maximum log length of 650 mm: convenient preparation of standard fireplace and heating wood ➡️ Rubber transport wheels: easier machine mobility ➡️ Weight of 153 kg: high stability during operation Choose greater power in a compact form. Select the CORMAK LUP10T and prepare wood more conveniently, efficiently, and with less effort. Benefits of Using the Log Splitter ➡️ Approx. 10 tons of splitting force: effective splitting of larger and harder logs ➡️ 4 kW motor: stable operation with demanding wood types ➡️ 400 V power supply: an excellent solution for intensive work on farms, in workshops, or around the home ➡️ Maximum log diameter of 450 mm: suitable for processing large pieces of firewood ➡️ Maximum log length of 650 mm: convenient preparation of wood for fireplaces, stoves, or boilers ➡️ Compact construction: easier storage and comfortable use in limited spaces ➡️ Rubber transport wheels: smoother repositioning of the machine in the workplace ➡️ Weight of 153 kg: excellent stability while splitting wood ➡️ Less effort than using an axe: more comfortable firewood preparation without heavy physical strain Choose high power in a compact form. Select the CORMAK LUP10T and prepare wood faster, more comfortably, and with less effort.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Ljdpfx Aqsx Twcpoverl

Condition: excellent (used), Year of construction: 2017, operating hours: 164 h, Residual Wood Shredder WEIMA WL 4 - 164 operating hours Feed opening: 600 mm x 1050 mm Throughput capacity: dependent on material and screen Rotor diameter: 260 mm Rotor speed: 80 - 125 rpm Motor power: 18.5 kW Number of knives: 28 knives, V-rotor Knife dimension: 40 x 40 mm, hollow ground Screen perforation: 30 mm Extraction nozzle diameter: 160 mm Air velocity: 28 m/sec. CE Weight: approx. 1,300 kg Dimensions L x W x H = 2,045 x 1,190 x 1,640 mm Lodjy Rncuepfx Aqverl including option with free-cutting hopper including all documentation

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Lsdpfsw S Eylex Aqvsrl

Condition: new, Year of construction: 2025, functionality: fully functional, Chipper heads for chipper canter sawmachine R200, 250 Lrodpfx Aqox I Skdsvsl

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Minimum log length: 2.4 m Lrjdpfx Aqoxfrmwevol Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, Bruks 700 / 400 Chipper Year of manufacture: 2001 Condition: perfect, refurbished Technical data: * Main electric motor power: 130 kW * Number of knives in the rotor: 3 pcs * Infeed material size: 700 / 400 mm * Vibrating feeder length: 40 m Lrsdpfx Aqey T Sn Hovjl * Outfeed conveyor length, inclined: 20 m * Number of feed rollers: 12 pcs – lower: 9 pcs, upper: 3 pcs * Weight of the chipper including feeder and outfeed conveyor: approx. 30 tons

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm Ljdpfsr R Ewlox Aqvjrl - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: excellent (used), CATALOG NUMBER 6943 TECHNICAL DATA - loading hopper inlet: 1600x1500mm - rotor working width: 1500mm - main motor: 45kW - pump motor: 5.5kW - number of knives: 44 pcs - knife size: 50x50mm - screen: 59mm - pusher drawer - autoreverse feature - dimensions (L/W/H): 3430x2800x2850mm - weight approx. 9000kg ADVANTAGES – French production - New knives installed Lredpfx Ajy Nz Syoqvsl – Autoreverse – Pusher drawer – Very good condition – Used shredder Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Lrsdpfxsy Iyvno Aqvjl Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm Lsdpsy Nyq Uefx Aqvsrl - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW Lodpsy Nym Aefx Aqvjrl - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Lrjdey Iwf Hepfx Aqvjl Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: used, Year of construction: 2026, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Lrsdpfxjy S U Sle Aqvsl Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 230V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 230 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg PLEASE NOTE!!! This machine is a return item. 5 units available. No cross-braces, fully functional NO WARRANTY!

Condition: used, splitting force 5 Tonnen Kind of drive Elektro 230 V weight ca. 50 kg Holzkraft HSE 5-520 KH wood splitter for convenient and safe splitting of short logs for private or semi-professional use. The compact design and simple operation enable efficient working even in confined spaces. Ideal for preparing firewood. Lsdpfx Aowxc Dioqvjrl Splitting diameter: max. 250 mm Splitting length: max. 520 mm.

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and technical data: - Fully installed dryer with trolley, high-performance radial fan, electric heating Lrodpey R Ha Sofx Aqvsl - Supply and exhaust air dampers, safety thermostat, spray device - Lift-swing door for easy opening and closing of the dryer - Interior cladding: all side walls are made of sea-water resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood components such as tannic acid, etc. - The sealing of the connection joints is absolutely durable and also allows steaming in the unit - Stack dimensions: 530 x 105 x 115 cm - Stack volume: 6.4 m³ - External dimensions: 690 x 176 x 140 cm - Heating: 12 kW - Motor: 1.1 kW / 400 V - With MP 902 control Availability: short-term Location: 63934 Röllbach

Year of construction: 2026, condition: new, I´m offering brand new stackers incl brand new belt conveyors to go with the stacker New design New Program New control system CE Marking Sew Motors for Sweeper, Length adjustment and Lift Sweeper cycle time 0,5 sec Wood Stack for boards from 450mm to 3000mm. With brick, zigzag and normal stacking. Lsdey Tb Ivspfx Aqvorl Sticks can be added as an optional. Technical info: Board length 450-3000mm Width 50-200mm Thickness 16-100mm Pack size 1200x1200 incl. pallet ( Max 2000 Kg)

Year of construction: 2026, condition: new, functionality: fully functional, I´m offering brand new stackers with CE marking New design New Program New control system Sew Motors for Length adjustment and Lift Lredpfx Aqsy Tb Hxjvsl Sew Motor for Sweeper, 60 boards pr Min / Or upgrade to servo 120 boards pr min Wood Stack for boards from 450mm to 1500mm. With brick, zigzag and normal stacking. Sticks can be added as an optional. Technical info: Board length 450-1500mm Width 50-200mm Thickness 16-100mm Board weight max 15 Kg Layer weight max 100 Kg Pack size 1200x1200 incl Pallet ( Max 1500 Kg)

Condition: ready for operation (used), Year of construction: 1994, Mawera RZM 200 Main motor: 22 kW with electronic soft start Automatic idling shutdown Hydraulics: 1.0/1.4 kW, reversible Hopper opening: 844 x 1000 mm All-steel pipe: 270 mm Ø Rotor speed: 135 rpm Chopping teeth: 30 pieces, replaceable Chopping capacity: 500-850 kg/h Extraction: 30-35 m/s Weight: 2100 kg (without control cabinet) Control cabinet: with PLC microprocessor control 30 pieces, replaceable 500-850 kg/h with PLC microprocessor control Operating hours: only 2562 Difference between RMO and RZM: Ledpfxey T Ih No Aqvorl The RMO is an older model, a classic found on the used market. The RZM 200 is its modern evolution – more robustly built, intelligently controlled, easier to maintain, and more efficient when processing modern wood waste and pallets.

Condition: good (used), Year of construction: 2016, Type of fuel: Petrol Empty weight: 765 kg Technical condition: good Visual appearance: good Ledpsuckuaefx Aqvjrl Serial number: SG0732 Transport dimensions (LxWxH): 1,91x0,92x1,3 Rental currency: EUR Please contact PFEIFER GROUP, Pfeifer Heavy Machinery Poland or Pfeifer Heavy Machinery United Kingdom for more information Manufacturer: Barreto Typ: 30SG Building year: 2016 Fuel: Gasoline Serial number: SG0732 Hydraulically driven cutting wheel Ø 49 cm with 16 teeth Cutting head swing: 83°, 120 cm arc Cutting head operation: Joystick Max. working depth: 35 cm Max. working height: 81 cm Weight: 765 kg Dimensions 191 x 92 x 130 cm (l x w x h) CE (Declaration of Conformity)

Condition: new, Year of construction: 2026, Yanigav Log Splitter FBA26 Lrodpor D Nhfofx Aqvsl • Weight: 350 kg • Dimensions (LxWxH): 1.0 x 2.0 x 0.9 m (working width: 2.9 m) • Force: 26 t • Drive: hydraulic pump • Log length: up to 110 cm • Log diameter: min. 30 cm • Wedge length: 38 cm