Used Wood Heating for sale (32,012)

Condition: used, Year of construction: 1995, machine/vehicle number: IDC000049, Vecoplan VZ 60/34 V shredder For shredding wood waste and other products. Inlet width 600 mm; Inlet height 340 mm; Number of cutting plates 28; Chedpferdykvsx Ab Sjc Cutting inserts 40 x 40 mm; Rotor speed approx. 450 rpm; Chip or shredded product size approx. 30 mm; Capacity 2 m3/hour; Input rotor motor power 11 kW

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. Chjdjwp Rqfopfx Ab Soc The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: excellent (used), Vecoplan 350/140 Chipper / Shredder Catalogue number 7742 TECHNICAL DATA - Infeed width: 350 mm - Infeed height: 140 mm - Shaft width: 345 mm - Shaft diameter: 290 mm - Number of knives: 2 pcs - Screen size: 55x55 mm - Toothed feed shaft from top and bottom - Shaft motors: 2×1.5 kW - Electric autoreverse (adjustable) - with vibrating feeder tray - Vibrating tray length and width: 3750×355 mm - Total vibrating tray dimensions: 3750x620x1210 mm - Receiving conveyor: 2970x340 mm Chjdpfx Ajxcx S Ijb Sjc - Conveyor belt discharge dimensions: 3000x630x750 mm - Main motor: 22 kW - Dimensions (L/W/H): 3000x1100x1500 mm - Weight approx.: 2500 kg ADVANTAGES – German production – with vibrating tray – with receiving belt conveyor – autoreverse function – used chipper, in very good condition Net price: 47,900 PLN Net price: 11,270 EUR depending on exchange rate 4.25 EUR (Prices may change in case of significant rate fluctuations)

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Csdexbupaopfx Ab Sshc Application Types Complete Production

Year of construction: 2013, condition: new, wood baking oven with direct heating Chsdpfxjygm Us Ab Sec baking area 1,0 x 0,7 x 0,25 m (L x W xH) 8cm heatingstones also available with fully automatic pelletfiring system

Condition: used, Year of construction: 2016, operating hours: 6,257 h, Auction item. Wood chipper with tractor Class Xerion 3800 in working condition. 7 months ago was made an overhaul of tractor engine. Tractor: power- 268 kW, year - 2010, weight - 13 400 kg, technical inspection valid till 2026-01-31. Crane: Palfinger M70F101, year - 2016. Tractor tires size 800/70R38. Items location may be different. Chsdpfxsxfz A Io Ab Sjc

Condition: used, Chain conveyor IDC000113 - total length: 30 m Csdpfxsvlc Ngs Ab Sehc - width: 1 m - height: 850 mm - electric motor: 11 kW

Condition: excellent (used), For sale: Genini brand lathe in very good condition Chjdpfxjxf Nyuj Ab Soc

Condition: excellent (used), Catalogue number: 7741 TECHNICAL DATA ingress width: 400 mm ingress height: 210 mm shaft width: 430 mm shaft diameter: 390 mm knife length: 430 mm number of knives: 2 pcs screen dimensions: 38x24 mm / 27x27 mm bottom gear-driven feed shaft lower shaft motor: 0.75 kW top gear-driven feed shaft top shaft motor: 0.75 kW Chedpsxcx R Djfx Ab Sjc belt feeder feeder belt length: 1950 mm feeder belt width: 400 mm discharge conveyor with adjustable height: 3 kW conveyor dimensions: 6100x550 mm overall discharge conveyor dimensions: 6550x1850 mm main motor: 30 kW auto-reverse (adjustable) overall dimensions (L/W/H): 3750x1720x1750 mm weight approx.: 3500 kg – German-made – auto-reverse – belt feeder – discharge conveyor with adjustable height (mobile) – used chipper, in very good condition Net price: 86,900 PLN Net price: 20,450 EUR depending on the exchange rate 4.25 EUR (Prices may change subject to significant fluctuations)

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 9294.05 mm Measurements depth 32183 mm Measurements height 820 mm Main Drive Spindle speed range 1795 This FURNIMATE SAT-660-F it's a Finger Jointing line Machine which was manufactured in 2018. It features a machine length of 32,183 mm and a width of 9,294.05 mm. The machine operates with a SAR-1 control system, achieving a carriage forward speed of 40 m/min and a backward speed of 90 m/min. The spindle speed reaches up to 1,795 RPM. Consider the opportunity to buy this FURNIMATE SAT-660-F Finger Jointing line Machine. Contact us for more information. Csdpfxexa H Tne Ab Sehc Application Types Other Woodworking Machinery

Year of construction: 2015, condition: new, Beer short-time-heating steamheated capacity 2000 l/h Chsdpfx Abscltpyo Ssc preheating, backcooling and icewaterplateheatexchanger

Condition: excellent (used), Year of construction: 2003, CNC UNICA Wood production year 2003, Uniteam brand since 2016 belongs to Biesse Max. useful working area (X-Y-Z) mm 3440 x 1300 x 200 mm Vertical electrospindle motor power 9 kW Machine size 5000 x 2350 x 2200 mm Weight 4000 kg Machine in good working condition. Cedpfx Aowk Ekcsb Sohc

Condition: used, Manufacturer: Bruks Model: 1500M Cedpfjwagnbjx Ab Sohc Productivity: 50-100 m3/h Electric motor: 110 kW After overhaul

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW right head motor 7.5 kW left head motor 11 kW feed motor 7.5 kW Chedpfx Asiqflbsb Sjc electric height adjustment smooth change of feed speed

Condition: good (used), Year of construction: 1973, fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4122/4031/4410 -Power: 18750 kcal/h / 21.75 kW -Nominal air flow: 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max. 8 bar -Number: 3x air heaters available -Price: per piece -Dimensions: 800/550/H600 mm Chjdpfx Aeu Tlhpsb Soc -Weight: 53 kg/piece

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 5 Codpfxsxfctbe Ab Sshc Additional Equipment Central Lubrication Vacuum Supply: 1 vacuum pump (Busch-Mink) Output approx. 250 m3/h 1 unit for manual operation (emergency stop, feed, hood open/close) Protective Fencing Remote Diagnosis Available This 5-axis MKM UNI Portal 50/15 RO was manufactured in 2008, designed for versatile machining of wood, plastics, and light metals. It features a large working area with dimensions of 5000mm x 1500mm, and a clearance height of 200mm. The machine includes a high-performance electric spindle with HSK 63 F connection and a 12-position automatic tool change magazine. Ideal for complex, multi-axis operations. If you are looking to get high-quality milling capabilities consider the MKM UNI Portal 50/15 RO machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Capacity 3000 l juice per hour (depending on juice temperature). Chedpfx Aocx R Ddob Sec

Condition: new, Year of construction: 2025, functionality: fully functional, Filling system consisting of the following components: 1. Cross Trough: Trough width: 2.8 m Trough height (lower side): only 0.8 m Trough depth: 1.2 m incl. protective grid on top incl. 3 kW gear motor left and right versions available Optional: chassis, forklift adaptation, .... 2. Inclined Screw Conveyor: Length: 2 m (other lengths available upon request) Variable inclination incl. 3 kW gear motor 3. Feed Screw: Length: 2 m (other lengths available) Open on the end face All screw conveyors have a diameter of 200 mm and are continuously welded onto a steel tube! (Larger screw diameters also available upon request!) Without wiring and control system Cedovrcfujpfx Ab Sehc We are also happy to offer you custom-made designs! Prices excl. VAT.

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers - Manufacturer: Passimo OY - Screen area: 15 m2 Codpfx Abotmtf Rs Sshc - After renovation.

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm Chsdevzw Tfjpfx Ab Soc - without electric motor

Condition: used, Belt conveyor for wood pellets Chjdpfx Abswv Sn Eo Sjc Manufacturer: Sew-Eurodrive Length: 23cm Width: 1 m Power: 9.2kW

Condition: used, Wood chipper Bruks 1500M IDC000079 - Manufacturer: Bruks - Chip screen: BS2 - Scraper conveyor - Belt conveyor - Cyclone Cedpfx Abst D Dhde Sjhc - capacity: 50 m3/h

Condition: used, Drum wood chipper IDC000025 Chjdpfx Aotqz Sfeb Sjc - Manufacturer: Erjo, - Model: 204 MA, - Electric motor: 55 kW, - Capacity: 20-40 m3/val.

Condition: used, Wood chipper with outside building IDC000125 Codpfsvy Tqqsx Ab Sohc - manufacturer: Mario Ferrari - Year 1995 - complete with vibrating conveyor - soundproof room - with sawdust fan - with electric cabinet

Condition: used, Kahl - Wood Pellet cooler Codpfx Asv R Tdfsb Sshc 3-5 tons per hour