Used Woodwork for sale (12,235)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 120 mm, TECHNICAL DETAILS Working height: 120 mm Working width: 230 mm Feed rate: 6 / 12 m/min Fgodpezrmpmjfx Adrof Spindle speed: 6,000 RPM Spindle diameter: 40 mm Tool diameter, vertical spindle: 100–180 mm Infeed table length: 2,000 mm Motor power 1st spindle, bottom: 5.5 kW Motor power 2nd spindle, left: 11 kW Motor power 3rd spindle, right: 11 kW Motor power 4th spindle, top: 7.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,250 x 1,550 x 1,500 mm Weight: 1,800 kg EQUIPMENT Documentation

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 2087, functionality: fully functional, overall weight: 4,000 kg, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 125 mm, TECHNICAL DETAILS Fgsdpfxezrmpae Adrsf Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed rate: 6 m/min Maximum feed rate: 28 m/min Number of spindles: 6 Spindle speed: 6,000 rpm Spindle diameter: 40 mm Spindle motors 1. Spindle, bottom: 5.5 kW 2. Spindle, right: 5.5 kW 3. Spindle, left: 7.5 kW 4. Spindle, top: 11 kW 5. Spindle, top: 7.5 kW 6. Spindle, bottom: 7.5 kW MACHINE DETAILS Main fuse: 105 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AB/224221, functionality: fully functional, operating hours: 19,402 h, working width: 900 mm, milling spindle speed (max.): 18,000 rpm, working length: 3,050 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,050 mm Working area, Y-axis: 900 mm Working area, Z-axis: 60 mm Controlled axes: 1 Milling spindle Number of milling spindles: 1 Max. spindle speed: 18,000 rpm Main motor power: 5.6 kW Tool clamping system: ISO 30 Table design: Flat table Table length: 3,960 mm Table width: 840 mm Material clamping system: Pneumatic Drilling unit Motor power: 2.64 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 11 MACHINE DETAILS Software: SCM Maestro Voltage: 400 V Current consumption: 35 A Fuse rating: 63 A Connected load: 10.0 kW Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 1,900 x 2,250 mm Transport dimensions (L x W x H): 2,500 x 1,900 x 2,250 mm Transport weight: 1,600 kg Transport packages: 1 Fedpfx Aozrmn Njdrjgf Operating hours: 19,402 h EQUIPMENT Tools Documentation CNC documentation on USB stick User keys/licenses CE marking Saw unit Door interlock switch Safety light curtain Drilling tool

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-205-11-7632, functionality: fully functional, working width: 1,600 mm, milling spindle speed (max.): 30,000 rpm, working height: 535 mm, working length: 5,800 mm, TECHNICAL DETAILS Working area X-axis: 5,800 mm Working area Y-axis: 1,600 mm Working area Z-axis: 535 mm Number of milling spindles: 2 pcs. Milling spindle 1 Controlled axes: 4 pcs. Max. spindle speed: 30,000 rpm C-axis: Yes Milling spindle 2 Controlled axes: 4 pcs. Max. spindle speed: 30,000 rpm Fgjdpfx Aezrmnpjdref C-axis: Yes Table type: Beam table Table length: 2,500 mm Table width: 1,500 mm Tool clamping system: HSK-F63 Tool changer slots: 36 pcs. Material clamping system: Pneumatic MACHINE DETAILS Software: WoodWOP Dimensions & Weight Installation dimensions (L x W x H): 12,200 x 9,000 x 3,500 mm Overall length: 26,000 mm Empty weight: 9,000 kg Transport packages: 8 pcs. Vacuum system Number of vacuum pumps: 2 pcs. Vacuum pumps: Elmo Rietschle 2BL2141 Connection diameter: 50 mm Voltage: 400 V Current consumption: 91 A EQUIPMENT Infeed and outfeed system Loading system Unloading system Labeling machine Hand control Chip conveyor Vacuum pumps Tools USB stick with CNC documentation CE marking Documentation Safety fence Door interlock switch Safety light curtain

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Fsdszmtpvjpfx Adrogf Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: used, Year of construction: 2006, power: 25 kW (33.99 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, TECHNICAL DETAILS Max. panel width: 4,300 mm Max. panel length: 4,300 mm Min. cutting height: 3 mm Max. cutting height: 110 mm Max. saw blade overhang: 125 mm Feed and Grippers Number of grippers: 9 Number of grippers on the sliding stop: 9 Max. feed rate: 80 m/min Max. feed rate of the saw carriage: 120 m/min Saw Carriage Max. tool diameter: 450 mm Motor power: 18 kW Speed: 2,870 rpm Scoring Unit Design: Postforming scoring unit Max. tool diameter: 340 mm Motor power: 2.2 kW Fgsdpfjzmtn Sox Adrof Speed: 2,880 rpm MACHINE DETAILS Control system: Windows XP Machine programming software: CADMATIC 3 Total connected power: 25 kW EQUIPMENT CE marking 4 front support tables 9 grippers on the sliding stop Postforming scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8206

Condition: used, Year of construction: 2008, power: 36 kW (48.95 HP), cutting height (max.): 105 mm, cutting width (max.): 4,400 mm, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 4,400 mm Max. panel length: 2,200 mm Max. cutting height: 105 mm Thin panel feed: Yes Post-forming process: Yes Gripper system Number of grippers: 10 Flexible, NC-positionable grippers: Yes Grippers on the sliding stop: Yes Sawing unit Fjdpfx Ajzmtnxedregf Main saw blade overhang: 120 mm Max. saw blade overhang: 120 mm Max. tool diameter, main saw: 450 mm Scoring unit: Yes Post-forming scoring unit: Yes Max. tool diameter, scoring saw: 300 mm Max. feed rate: 130 m/min MACHINE DETAILS Control system: Windows Machine programming software: OSI Total connected load: 36 kW EQUIPMENT CE marking Tilting table with 4 tables Saw carriage 1 Barcode label printer Zebra S4M The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8409

Condition: used, Year of construction: 2010, power: 30 kW (40.79 HP), cutting width (max.): 3,800 mm, controller model: POWERCONTROL, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 3,800 mm Max. panel length: 2,200 mm Min. cutting height: 6 mm Max. saw blade overhang: 130 mm Number of tables: 3 Number of grippers: 7 Gripper arrangement: On the sliding stop Max. feed rate: 90 m/min Sawing unit Fgedpfx Adozmtnlorjf Number of saw carriages: 1 Positioning: NC-controlled Max. tool diameter: 480 mm Motor power: 18 kW Scoring unit Positioning: NC-controlled Max. tool diameter: 200 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Machine programming software: CADMATIC 4 Total connected load: 30 kW EQUIPMENT CE marking Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7875

Condition: used, Year of construction: 2004, saw blade diameter: 180 mm, tool diameter: 450 mm, Equipment: scorer, TECHNICAL DETAILS Sawing carriage Fgsdpszmtm Usfx Adrof Max. saw blade overhang: 125 mm Number of grippers: 11 Max. feed rate: 80 m/min Max. tool diameter: 450 mm Motor power: 21 kW Scoring saw Max. saw blade diameter: 180 mm Motor power: 2.2 kW Max. feed rate: 150 m/min EQUIPMENT Lifting table Scoring unit Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6645

Year of construction: 2010, condition: used, controller model: POWERTOUCH, power: 30 kW (40.79 HP), workpiece length (max.): 18,800 mm, workpiece width (max.): 15,000 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Workpiece length: 18,800 mm Workpiece width: 15,000 mm Min. plate length: 2,000 mm Max. plate length: 4,300 mm Min. plate width: 800 mm Max. plate width: 2,200 mm Max. feed rate: 80 m/min Fsdpszmtmnefx Adrsgf MACHINE DETAILS Control system: POWERTOUCH Total connected power: 30 kW EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5107

Condition: used, Year of construction: 2004, number of axes: 4, controller model: POWERCONTROL PC85, working width: 1,220 mm, milling spindle speed (max.): 24,000 rpm, working length: 3,250 mm, TECHNICAL DETAILS Working area X-axis: 3,250 mm Working area Y-axis: 1,220 mm Number of working areas: 2 Table system: Pod-and-rail table Number of vacuum pod holders: 6 Number of controlled axes: 4 Number of drilling units: 1 Number of milling spindles: 1 Number of grooving units: 1 Drilling unit Position: top Vertical drilling spindles: 12 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Position: top Controlled axes: 4 Motor power: 12 kW Speed: 24,000 rpm Cooling: Liquid cooling Tool change: automatic Grooving unit Position: top Fodpfx Adozmtl Rsregf Design: fixed, for producing grooves in the X-direction Maximum tool diameter: 100 mm Motor power: 2.2 kW Speed: 7,500 rpm Number of tool change stations: 16 Tool magazine on the machining head: 8 slots Tool magazine on the rear of the machine: 8 slots MACHINE DETAILS Control system: POWERCONTROL PC85 Programming software: WOODWOP 5 Main spindle power: 12 kW Total connected power: 22 kW Vacuum pump capacity: 100 m³/h EQUIPMENT CE marking Pod-and-rail work table 6 vacuum pod holders Vacuum pump Automatic tool changer 2 tool magazines, each with 8 slots Protective device for machining units with safety sensors Front safety mats Liquid cooling of the milling spindle The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7716

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW Fgjdpfx Aozmtlkjdref EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min Fgsdpfxszmtldo Adrsf MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Fgodozmtkaspfx Adrof Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Fedpfxszmtivs Adrjgf Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Manufacturer model: WD60 Motor power: 0.35 kW Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Total connected load: 22 kW EQUIPMENT Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, operating hours: 65 h, travel distance X-axis: 3,720 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 225 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 85 mm, Equipment: CE marking, The machine is a former trade show model with only 65 operating hours! An inspection with the machine running is possible at the end of August, as the contact person will be on-site then. TECHNICAL DETAILS Travel range X-axis: 3,720 mm Travel range Y-axis: 2,500 mm Travel range Z-axis: 225 mm Workpiece width max.: 2,100 mm Workpiece height max.: 85 mm Number of axes: 3 Tool magazine capacity: 15 Table length: 3,720 mm Table width: 2,100 mm MACHINE DETAILS Type of operation: electric Dimensions (L x W x H): 9,766 x 4,789 x 2,288 mm EQUIPMENT CE marking Fgedpfx Aszrfhbodrsf Documentation/Manual

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Fodpfx Adozmvqvsrsgf Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Condition: used, Year of construction: 2015, edge thickness (max.): 22 mm, feed rate X-axis: 25 m/min, milling spindle speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Manufacturer/Model: RT-E Motor power: 4 kW Gluing Preheating lamps: for heating the panel side PUR pre-melter: Nordson PURBLUE 4-HO Glue application unit: 100 V End-capping unit Manufacturer/Model: YU/SP750 Number of motors: 2 Positioning: NC-controlled Milling unit Manufacturer/Model: Type U Motor power: 4 kW Speed: 12,000 rpm Engagement: automatically time-controlled Polishing unit Number of motors: 2 TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 62 mm Min. panel length: 380 mm Min. panel width: 55 mm Min. edge thickness: 0.4 mm Max. edge thickness: 22 mm Max. feed rate: 25 m/min Pressure: rubber belt MACHINE DETAILS Control system: PC control EQUIPMENT CE marking Rubber belt pressure Panel support guides Pre-milling unit RT-E Preheating lamps for panel side PUR pre-melter Nordson PURBLUE 4-HO Fgjdpfxjzmvpxo Adref End-capping unit YU/SP750 Milling unit Type U Polishing unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6527

Year of construction: 2025, operating hours: 24 h, condition: new, functionality: fully functional, empty load weight: 6,500 kg, machine/vehicle number: AVB-68HELIX, Heavy duty and robust body type of wood shaving machine, AVB-HELIX68 wood shaving machines are one of our most popular machines with a higher industrial capacity for the market. Designed to process both logs and offcuts with a minimum material size, this machine is suitable for round log shaving and wood waste processing. It is equipped with T.C.T. carbide blades and also fitted with a hopper pressing system for small pieces and the offcuts (optional). The working principle with a planer blade and carbide blades is available. TECHNICAL DETAILS; TECHNICAL SPECIFICATIONS AVB-68HELIX Number of Cutterheads 6 Length of Cutter Head 80 cm Number of Blades 240 blades/cutter head Power Supply 6 *11 KW = 66 KW (88,5 HP) Hopper Working Hydraulic Hopper Dimensions 2300*800*1100 mm Working Voltage 380 V 50-60 Hz Conveyor Band Motor 1,5 KW Hydraulic Motor 11 KW Total Power 78,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Shaving Depth 0,2 mm - 2 mm Max.Log Input Length 10-220 cm Max.Log Input Width 10 - 75 cm Working Distance 2400 mm Machine Dimensions L5700 x H1700x W1600 mm Fedpfjidxu Hsx Adrogf Weight 5.600 kg Production Capacity 2000-2500 kg/h

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Fedeztq Hxepfx Adrsgf Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: used, Year of construction: 2017, functionality: fully functional, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, Equipment: documentation/manual, We offer this Format4 Tempora 60.12 edge banding machine, used, manufactured in 2017. Manufacturer: Format4 Fgjdpoztmbrefx Adref Model: Tempora 60.12 Year of manufacture: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, machine/vehicle number: 008698, X axis working area: 4200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 18 Fgsdjztka Ejpfx Adrof Total number of tool changer positions: 22

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW Fodsztrfcspfx Adrjgf - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7610 Technical data: - Inlet width: 410mm - Inlet height: 140mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 80x130mm - Top: single driven, toothed shaft - Bottom: 2 driven, toothed shafts Fgjdpfx Asztq Uvodrsf - Infeed belt length: 2850mm - Infeed belt width: 390mm - Autoreverse - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4800x1550x1200mm - Weight: approx. 2200kg ADVANTAGES – Manufactured in Poland – Autoreverse – Equipped with conveyor – DTR technical documentation – Used chipper, very good condition Net price: 75,900 PLN Net price: 18,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7411 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW Fodpfxeztq T Ee Adrjgf - Belt feeder - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations)