Mitre saw

Omga

Condition: good (used), Year of construction: 2000, I sell the double mitre saw OMGA TR2A. Cutting length 390 - 3000mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Ihodpfx Astwbcysbcow Good condition. Available immediately.

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump Isdpfx Aecggy Sobcehw - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Ihedpfxexwumqo Abcow Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Saw blade bore: 30 mm Saw blade diameter: 220 mm Spindle speed: 5000 rpm

Condition: good (used), Year of construction: 1995, Automatic notching machine for cross joints (see attached prospect for technical data). Second-hand machine in good condition, tested in our workshop before delivery. Iodpoyr A Umjfx Abcehw

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" Ijdpfxodt Rgvj Abcshw VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Year of construction: 2014, total length: 5,200 mm, total width: 900 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 8.687 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Min. saw blade diameter [mm]: 350 Ihsdpeyna Ayefx Abcow - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 6.53 - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 5200mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2010 - Documentation available: No - CE certificate present: No - Serial number: 6.719 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 7.13 - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Ihjdpfoyna Aasx Abcow Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: repair required (used), Stroj za struženje manjših koškov iz lesa stroj dela debelino od 7 -45 mm Ihsdouknznjpfx Abcsw

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Ihedpexnlgcefx Abcjw Storage location: Garbsen

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, OMGA 1000 radial saw Specification: • condition - after inspection, fully functional • manufacturer - OMGA • model - 1000 • blade diameter max 400 mm • max dimensions of the cut element 140 x 1000 mm • guards on the saw to ensure the safety of the saw operator • cutting adjustment in three planes • extraction port fi 80 mm and 110 mm • tabletop dimensions 160 x 95 cm • 1998 year of production Ihsdjv Hqknopfx Abcew • manufacturer's documentation • dimensions - 175 x 170 x 155 cm (length x width x height) Additional information: • the machine is in excellent technical condition, ready for immediate use • the photos presented show the actual condition of the subject of sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: new, Deburring machine brand: Aboagye Model: AF 165 Condition: new machine Ihedpfx Abedurxnecsw Speed: 2,800 RPM maximum cutting width: 1 mm equipped as standard with: -Special flap disc K80-ST -Suction nozzle -Manual

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units Isdpfex Sq E Iex Abcshw – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Ijdpfxoxvh E Rs Abcohw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Machine weight 4500 kg Main Drive Spindle speed range 10000 Spindle motor power CAT40 / SK40 Number of axis 4 Isdpfx Abex D Ikpecohw Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, cutting height (max.): 80 mm, total length: 7,470 mm, total width: 1,100 mm, total height: 1,500 mm, overall weight: 450 kg, cutting length (max.): 2,500 mm, main saw diameter: 340 mm, OMGA T720 crosscut saw Specification: - condition - used - manufacturer - OMGA - model - T720 - working width - 250 mm - working height - 80 mm Isdpfxsr Ik I As Abcjhw - motor power - 2.2 kW - right table length - 400 cm ( 2 x 200 cm ) - left table length - 315 cm - tables with a width of 29 cm - pneumatic ratchets for cutting to the set length - 3 pcs. - adjustable cutting speed - max blade diameter - 340 mm - spindle - fi 40 mm - suction nozzle - fi 100 mm - weight - about 450 kg - overall dimensions - 742 x 110 x 150 cm (L x W x H) - body dimensions - 100 x 110 x 150 cm (L x W x H) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT