Perndorfer waterjet cutting machine

Perndorfer WSS 4020

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting machine Perndorfer type WSS4020, table size 4000/2000 mm, BFT high-pressure pump with 37 kW and 4000 bar cutting pressure, 3-D cutting head for contour cutting. The machine is used and in good condition; an overhaul by the manufacturer was carried out recently. The machine can be inspected and tested at any time. Cedex H Ny Tjpfx Agkjgp

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment Cjdpfx Agox D Nwdekogp • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump

Condition: used, functionality: fully functional, Year of construction: 2019, laser hours: 5,780 h, laser power: 4,000 W, TRULASER TUBE 7000 FIBER 4kW Year of manufacture: 07/2019 Laser power: 4kW fiber Laser on: 5780 h (!) Technical information: - Max. outside diameter: 254 mm - Loading and unloading - Loading with LoadMaster Tube: 6,5m / Automatic unolading: 4,5m - RapidCut  Use of a dynamic additional axis  More than fourfold accelerations possible Bevel cut technology package  Bevel cutting up to 45°  Contains electrically movable feed-through chuck - PierceLine Cjdpfeyalb Esx Agkegp  Optimized piercing process - Technology package for tapping • Additional machining processes such as flow drilling, tapping and twist drilling • NC controlled spindle with standard clamping system (standard interface HSK-A32) • The application and technology parameters of the tool adapter and tools should be requested from the respective supplier • 8-fold tool changer ...and many more options!

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. Cgedpfx Aoxnvq Eegkjp 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM Csdpfxstqd Nde Agkogp ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 2013, turning diameter over bed slide: 435 mm, turning diameter over top slide: 245 mm, center height: 210 mm, center width: 1,500 mm, overall weight: 1,700 kg, Technical data Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre height: 210 mm Centre distance: 1,500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions (approx.): L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Equipment • Stepless speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks, manufacturer Röhm Duro • Multifix toolholder + 10 inserts • Collet chuck Fahrion + approx. 33 collets • Fixed and travelling steady rest Csdpsykakpsfx Agkjgp • Various live and dead centres + drill chuck • Coolant system • Documentation HEIDENHAIN ND 780 digital position display • 3-axis readout for bed, cross slide, and top slide • Tool memory for 16 tools, with one reference point per axis • Summation key for Z and Zo • Switchable between imperial/metric • X-axis traverse as radius or diameter display • Delta key for "distance-to-go" display to zero • Display resolution up to 1 µm • "Freeze" actual position • Taper calculator All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm Csdsxtqxbjpfx Agkogp z-travel , mm STM MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Machine type: Amada - Schubert High Performance Saw used Make: AMADA - Schubert Type: CMB-100 CNC / TRB-SAV Year of construction: 2019 with thin blade technology in standard version, fully automatic Cutting range: 25-101 mm Blade feed: 0-30 mm/sec Saw blade: 360 x 40 x 2.5 Cutting speed: 56-210 min Weight: 2800 kg further technical details on request Heavy duty feeding system for automatic separation of round and square material from 30 - 100 (140) mm and up to 8 m in length Brief description: Our feeding systems are particularly low-maintenance and robust. They are mainly used in heavy-duty areas and forging operations. 1 piece SAV 140/8 V-conveyor in standard design for processing bars up to 8 m in length. Make: Schubert General: Dimensions (L/W/H): 6500 mm/ 1500 mm/ 1500 mm Support weight: approx. 5 tons Transfer height: variable Codpeuv Hlkjfx Agkjgp Number of supports: 4 pieces at a distance of approx. 1600 mm Drive: 2.2 kW geared motor with brake + friction clutch

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, rotational speed infinitely variable, DMG-MORI DMU 60 EVO linear Year 2014 Travel X/Y/Z: 600 mm x 500 mm x 500 mm Motor spindle SK40 with 18,000 rpm NC tilting rotary table, B and C axes Tool magazine with 60 stations Heat exchanger for spindle and table Dynamic package Control: Siemens 840 D SL with Shop-Mill Infrared probe Heidenhain TS 649 Blum laser tool measurement Scraper belt conveyor, HPC with paper band filter and 80 bar Cgsdpfx Agexvhrwoksp Oil mist emulsion separator Programmable coolant nozzles Electronic handwheel, mode 4 Turning and milling cycle

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, Technical Data – HERMLE C 40 UP Control System: - Heidenhain iTNC 530 - Travel X/Y/Z: 850/700/500 mm Options: - Heidenhain DNC - DXF Import - Kinematic Opt iTNC Main Spindle: - Speed: 18,000 rpm - Tool Holder: HSK-A63 Tool Magazine: - Additional Magazine ZM43 Feed / Axes: - Linear guideways – Dynamic Version - Table variant: NC-SRT Ø 420 mm, worm gear drive - Table axis: A-axis offset from center - Table specification: Pallet clamping system Coolant System: - Internal coolant supply 80 bar - Coolant filter type: Paper band filter for internal coolant system Chip Disposal: - Scraper belt conveyor Cab / Safety: - Base structure - Automatic cabin door - Manual roof cover - Laminated safety glass window Electrics: - Frequency: 50 Hz - Country key: DE Pallet Automation: - Pallet changer: PW160, 400 × 400 mm - Pallet storage Cedpfx Agoxx Rxrjkegp MMS / Measuring Systems: - External MQL (Minimum Quantity Lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Prepared for additional touch probe Software / Options: - Event Messenger - Tool identification HSK - Machine license: TCS-Soflex - System monitoring Free Accessories: - Electronic thermal compensation - Electronic hand-held control module - Oil mist extraction (prepared & with post filter) - Flange for oil mist extraction - Sealing air for scales - Chip washdown gun - Bed flushing - Internal & external air blast - Signal light - Test documentation - Test protocol: C 40 iTNC 530 PW160