Briquetting press

RUF RUF 500

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, pressure: 6 bar, 3 units Netzsch Nemo progressive cavity pumps. Shaft stainless steel. Housing steel. These refurbished standby machines come from the spare parts warehouse. They were intended for the delivery of calcium hydroxide suspension. Images are in order from left to right: 1. Photos 1-9 Green pump on the left NM 038BY02S12B (new, unused) 2. Photos 10-18 Grey pump in the middle NM 045BY01S08B (refurbished) 3. Photos 19-26 Blue pump on the right NM 038 BY (refurbished) Knsdpfx Aew I Hniefdjb

Condition: used, Year of construction: 1999, operating hours: 1,05,000 h, functionality: fully functional, overall weight: 741 kg, total length: 1,940 mm, total width: 870 mm, total height: 1,300 mm, volume flow: 425 m³/h, operating pressure: 1 bar, final pressure: 1 bar, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 970 rpm, protection type (IP code): IP55, KSB KWP K 200-320 Pump Set, 18.5 kW – Complete Set, Documented 8 × KSB Centrifugal Pump KWP K 200-320 – Complete Industrial Unit, incl. Drive For sale are 8 identical, well-maintained industrial pump units from the renowned KSB KWP K 200-320 series. The units originate from a special order (KSB Pegnitz, order from 1999/2000) and were accepted and tested according to DIN 1944/III with customer acceptance. Sale of used KSB pump units (year of manufacture 1999, relatively low operating time of approx. 105,000 hours per unit) in as-is condition, without warranty or guarantee. Units have been dismantled; functional tests are possible upon request (without assurance of characteristics). Reference operation with identical units available. Sale preferably in packages; further units potentially available in the future (11 additional units). Spare parts and service obligations are excluded! Pump – KSB KWP K 200-320 Manufacturer KSB Aktiengesellschaft, Pegnitz Type / Series KWP K 200-320 (Impeller pump, radially split volute casing pump) Works No. 5-N01-541905 (Serial numbers on request) Flow rate Q 425 m³/h (118 l/s) Head H 10.25 m Min. Flow Rate 89.9 m³/h Speed 970 rpm (constant) Pump power 14.7 kW Motor power 18.5 kW Efficiency 80.8% NPSH 2.20 m Operating pressure max. 10 bar Suction nozzle DN 200, axial Discharge nozzle DN 200, upwards Flange DIN 2532 PN 10 Kedpfx Aezp U Tuefdjnb Impeller diameter 320 mm (Re-machining form A15, 3-blade) Bearing carrier P05AX Shaft seal Tandem-GLRD (non-pressurized quench), Type 4K M3 Materials Pump casing / Pressure cover / Impeller 9.4460 (stainless, abrasion-resistant) Shaft sleeve 1.4539 GLRD cover 1.4571 Shaft C 45 N Base plate GG (gray cast iron) Drive & Peripherals per Unit Electric motor VEM, IP55, IEC size 200L, 18.5 kW, 970 rpm, B3, 50 Hz, 400/690 V, Insulation F, 3 PT100 sensors Coupling Flender Eupex N-H / Size 140, Intermediate sleeve 180 mm Base plate ZN 24259-G-ISO, Size 9G, GG, 4×M24×320 stud bolts Quench tank incl. piping 1.4571, without fittings Coupling guard Steel Weights per Unit Pump 350 kg Motor 175 kg Base plate 200 kg Coupling + guard 16 kg Total 741 kg Available Documentation (per unit) • Acceptance / Test report of the initial commissioning EN 10204 / DIN 1944 Class III (5 measuring points) • Q-H curves (Curve No. K 95231) • Installation plan / Dimension table with nozzle connections • Installation drawing of the mechanical seal (Drawing No. 0W244223) • Piping plan quench tank • Operating and maintenance instructions Application area / Application notes The KWP K series is a proven process centrifugal pump for: • Wastewater treatment and sewage treatment plant process technology • Biogas plants and fermentation substrate conveying • Sugar factories, paper mills, food production • Biotechnological processes (algae suspensions, fermentation) • Cooling water circuits and process water conveying in the chemical industry Further important (sales) information can be found in the attached documents.

Condition: good (used), Screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor -Design: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Housing and auger: made of stainless steel -Auger: Ø 150 mm -Auger: 130 mm -Trough width inside: 170 mm - Worm: Steel/stainless steel, higher torque Knodpfx Ajgqlhaefdob -Dimensions: see technical drawing in the photos -Transport dimensions: 2240/760/H520 mm -Weight: 278 kg

Condition: used, Year of construction: 2022, total width: 1,800 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 3,000 kg, Hydraulic briquette press Manufacturer: Winter Kodpfjzxlznox Afdenb Type: BP 450 Year of manufacture according to nameplate: 2022 Technical data: Capacity max. 450 kg/h Motor 35 kW / 400 V, 50 Hz Chip compression min. 1,000 kg/cm² max. 1,500 kg/cm³ Wood moisture < 14 % Briquette dimensions: Length 150 mm, Width 60 mm Dimensions L x W x H: 1,800 x 1,800 x 1,900 mm Weight 3,000 kg Purchase price net € plus applicable VAT. VAT will be shown separately on our invoice. Subject to changes, errors and prior sale. Sale is made without warranty and guarantee, and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Year of construction: 2012, condition: good (used), Derichs Stainless Steel screw conveyor Kedpfx Asyc Tt Usfdenb Screw conveyors are used to meter or convey product horizontally up to approximately 7 m or vertically up to 3 m. Depending on the application, either enclosed tubular screw conveyors or trough screw conveyors are used. The advantage of trough screw conveyors is that the trough lids can be opened for cleaning. The bulk material is given into the conveyor through the inlet. There it is conveyed by the screw spirals to the outlet. In the case of dosing and weighing processes, the drive is generally controlled by a frequency converter in order to achieve a coarse and finest flow, which allows a weight-accurate dosing. In order to prevent product trickling at the outlet an optional pneumatically operated outlet flap can be installed. Manufacturer: Derichs Model: FMS-T-400 Year: 2012 Screw Diameter: 400 mm Screw Length: 4.660 mm Power: 5,5 kW / 50Hz Capacity: 80 m3/h Motor Speed: 43U/min Machine Dimensions LxWxH: 5.800x700x530

Condition: used, Platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Material: stainless steel Knjdpfxecti Atj Afdob -for: pump transport -Area: 300 x 1610 mm -External dimensions: 2160/580/H400 mm -Own weight: 58 kg

Condition: good (used), Door magnet, door magnet, holding magnets, fire door -Type: GT 70 A 001 -Voltage: 24 V 8 W -Holding force: 2000 N -Number: 2 magnets available Kjdpfxscb T R Hs Afdjnb -Price: per piece -Dimensions: Ø 70 x 35 mm -Weight: 0.83 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, inner dimension width: 1,100 mm, total length: 10,000 mm, total width: 1,900 mm, Equipment: CE marking, Drying oven used for lacquered and painted sheets. Knjdpfx Aozbat Eefdsb

Condition: good (used), Manufacturer: PCM Type: M16C12S Year of manufacture: 01/2017 (used only a little for molasses) Knedpjztvpfsfx Afdeb Includes: control cabinet + one piece of hose Offer valid without warranty.