Surface planer

SAC FS 430

Condition: used, Year of construction: 1987, machine/vehicle number: 8748, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: manual, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, overall weight: 745 kg, SAC surface planer FS 430, max. planing width 430 mm, table length 2,900 mm, infeed table 1,550 mm, outfeed table 1,310 mm, segmented cutterhead 430 x 35 x 3 mm, planer fence 1,300 x 160 mm, tiltable 0 - 45°, motor 3 kW (4 HP), weight approx. 745 kg, as inspected, ex location Seevetal, without transport, subject to prior sale. Lodpfxey Slzqo Aqvsrl

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Lrjdpfx Aqsu Egp Ijvjl Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence Ledpfex Nrvvjx Aqvsrl - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: used, Year of construction: 1989, For sale: Used SAC surface planer with a planing length of 2900 mm. The machine is in good condition and has been refurbished and inspected by our specialist staff. Lodpfx Aqeyh Auiovorl Technical specifications: - 4-knife cutterblock - Planing width: 430 mm - Planing length: 2900 mm - Extractable, suction diameter Ø 140 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1989 The planer is located in A-5431 Kuchl and can be inspected any time during our opening hours. Subject to prior sale! Related terms: planer, surface planer, jointer. Reference: R-G00 V0

Condition: used, functionality: unexamined, Year of construction: 2017, Ponsse Fox 8W Timber Harvester (2017) Lrodpexw U I Usfx Aqvjl with H6 harvesting head

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, type of input current: three-phase, planing width: 430 mm, rotational speed (min.): 5,000 rpm, total width: 950 mm, total height: 1,350 mm, overall weight: 650 kg, total length: 3,970 mm, working width: 430 mm, extraction connection diameter: 120 mm, extraction nozzle diameter: 1 mm, number of planer blades: 4, planer shaft diameter: 120 mm, Planer, jointer SAC FS 430.S Specification: • Condition: used, fully serviced • Manufacturer: SAC • Model: FS 430.S • Working width: 430 mm • Table length: 3960 mm • Infeed table length: 2500 mm • Adjustable tilting fence, dimensions 1800x160 mm • Motor power: 3.0 kW • Spindle speed: 5000 rpm • Chip thickness indicator • Max cutting depth: 8 mm • Electrically adjustable planing height from control panel • Electronic chip thickness indicator • Anti-noise combs on the shaft • Motor brake • Safety guard over the shaft • 4-knife shaft, 120 mm diameter, Tersa knife system Lredpfsxtd Ngsx Aqvjl • Star-delta starting • Sawdust extraction outlet: 120 mm diameter • Year of manufacture: 1993 • Weight: 650 kg • Overall dimensions: 396 x 95 x 135 cm (L x W x H) Additional information: • Very good technical condition • Posted photos show actual condition of the item for sale • Test run and inspection on site possible.

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle Lrsdpfxoh Nvyze Aqvsl -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler Lredpeu Rnqqsfx Aqvel 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: - grinding width 1100 mm - grinding height 1-150 mm - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. Ledogi Dryopfx Aqverl 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Year of construction: 2026, condition: new, Specifications: - Performance: 2000 L/h - Electric demands: 0,5 kW, 230 V, 6 A, monophase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 550x1075x350 mm - Weight: 50 kg Lredpfofhb I Hsx Aqvol - IP65 certified electronics - Food industrial impeller pump - Juice level sensors - Fully automatic operation, very easy to clean. - With 4pcs wheels. Requires minimal maintenance. - The machine is suitable for any Maurer press.