Perforated plate press

Schafberger & Sprödhuber LPP

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Ndsdpfx Abju T Nknousd Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction Ndsdpsqy E Rlefx Abujd spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: used, Year of construction: 1999, machine/vehicle number: 99T318, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - 4.5 kw - Blade diam. 330 mm - V. 380/50 - S/N 99T318 Nsdpfx Aeqmpnajbuedd - Year 1999

Condition: used, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Driving device with flanged rollers RU-DKFA and RU-4SSP 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- (technical data according to manufacturer - no guarantee!) Njdpjvu Hfdofx Abuedd

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Nedpfx Abeu Uh T Doujdd Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: new, Year of construction: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Units: 2 brush units centrally adjustable and each with individual fine adjustment Nodpfx Abemftk Asuodd Diagonal brush technology: Yes, infinitely adjustable from -7° to + 7° 1st brush: Metal brush diameter 220mm 2nd brush: Tynex brush, grit 80, diameter 220mm Height adjustment: electric Height indicator: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 4 kW Motor power feed: 0.37 kW Machine length: 1.5m Machine width: 1.5m Weight: 700kg

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Njdpfxoi Hpk Ue Abuodd Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Weight: 500kg

Condition: new, Main features of the machine: The TOP CUT 500 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work -accuracy and repeatability of cutting up to 0.01 cm Technical data: Maximum dimensions of the workpiece: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Max cutting height: 300 mm Minimum element height: 5 mm Saw band diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Ndjdpjiim Tqofx Abuod Voltage: 380V Main engine power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Nodpod Exwgjfx Abujdd Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Nsdpocqvhwsfx Abusdd Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -