Briquetting press

Schuko CT 1100 S-20 PLUS

Condition: used, Machine: Screw conveyor, Screw conveyor Type: Askania Maschinenbau GmbH, screw conveyor Model: TSF 315, No. 197 Year of construction: 1999 Fsdpfx Adern U H Hoaspd Mass: 350 kg Rated voltage: 230/400 V/ Connected load: 4 KW Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. Fpedjcnw U Depfx Adaod All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Length of the rolling table 2800 mm cutting width 1440 mm Fjdpfjxcg Hgsx Adaopd Motor output 7,5 kW Cutting height 150 mm Saw blade diameter 450 mm weight of the machine ca. 1200 kg range L-W-H 3,2 x 3,4 x 1,7 mm

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Fpsdpfx Aomdn Dxjdaod

Condition: used, Year of construction: 2017, functionality: fully functional, total width: 400 mm, power: 26 kW (35.35 HP), TECHNICAL DATA Maximum working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: 150 mm Worktable height: 900 mm Electric motors: Thin sheet planer motor power: 22.0 kW Fjdsw Thpfopfx Adaopd Drive motor: 3.0 kW Lifting motor: 0.50 kW Tool: Rotor speed: With adjustable drive speed: 2,100–3,000 rpm Number of knives: 48 pcs.

Condition: good (used), functionality: fully functional, number of engines: 4+4 Fpsdpfx Adsw D Nq Tjaod opening: 6 meters

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Fsdpfsvviytjx Adaepd

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm cutting height 100mm Fpjdpfx Aeucnuksdaod Total connection 39kW

Condition: new, Year of construction: 2025, ZGR-2140/1,2 with additional equipment Our products are best quality and have certificate CE. Plate Bending Machine ZGR-2140\1,2 Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 2,0 mm Cooper plate 1,7 mm Fpsdpfx Adscntlljasd - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 290 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs.

Condition: ready for operation (used), Year of construction: 2008, A CNC woodworking center Homag is available. Travel path X/Y/Z: 4000mm(4200mm)/1235mm/182mm, machine dimensions X/Y/Z: approx. 8000mm/5500mm/2950mm, operating hours: approx. 33226h. The machine is impact-sensitive at the terminal, and the laser shows problems with stone detection. Including spare operating equipment, chiller as well as various clamps and suction units. Documentation available. An on-site inspection is possible. Fpedoyddz Sopfx Adaed