Edgebander

SCM olimpic k 560 HP

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Ksdpsyux Riofx Abcjww Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Kwodpsxxpgbefx Abcsw Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, operating hours: 336 h, edge thickness (max.): 8 mm, total length: 4,764 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edge banding machine with only 336 operating hours & comprehensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control: Maestro Pro Edge Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edge Banding Machine Configuration: Flush trimming and scraper unit, radius: 1 mm Flush trimming and scraper unit, radius: 2 mm Spraying unit for edge finishing Spraying unit for delicate edges Surface scraper "RC-V" Brushing unit "SP-V" "SAVENERGY" kit "EASY SIZE" device Internal lighting for the enclosure and gluing area Ceramic lamp with infrared rays Electronic positioning of the pressure rollers Kwodpfeydc Absx Abcew Spare adhesive tank "SGP" with NC dosing system Additional adhesive tank "SGP" with NC dosing system Manual feed "Nesting" tracing rollers Diamond tools H=64 for pre-milling unit, 2 teeth Base

Condition: good (used), Year of construction: 2007, Technical characteristics : Kedpfst R T Hcsx Abcjww - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Working width 500 mm Kwedpfx Aox Eykgebcew Number of knives 4 St. knife system Streifenhobelmesser

Condition: used, Year of construction: 2018, functionality: fully functional, SCM Olimpic K 560 Automatic Edge Gluing, year 2018 for sale! Complectation: Chain feed speed 12/18m/min Edge thickness 0.4/3mm EVA glue Panel milling unit "RT-V" Glue application unit "VC-S4.1" Edge trimming unit "K-SEL" Edge milling unit "R-K" Edge corner rounding unit "ROUND X" Edge scraping unit RAS-K Polishing unit SP-V Technical characteristic: Conveyor speed (two speeds) m/min 12 - 18 Min / max part thickness mm 8 - 60 Kjdpfx Abow Sw Tkscjww Thickness of glued wooden edge mm 0.4 - 6 (8mm HP composition) Thickness of glued roll edge mm 0.4 - 3 Maximum area of ​​glued roll edge mm² 135 Diameter of reel support "plate" mm 780 Maximum overlap of glued edge, relative to the part mm 2+2 Minimum distance between transported parts mm 600 Minimum length of part (when the width of the part is min. 100 mm) mm 140 Minimum length of roll edge mm 180 Minimum length of wooden edge mm 220 Minimum width of the part (when the length of the part is min. 210 mm) mm 95 (60mm opc.) Width of the extension support mm 560 Height of the worktable from the floor mm 900 Plate milling unit "RT-V" Max. chip removal area mm2 55 Max. milling thickness mm 3 Min. / max. thickness of the part mm 8 - 45 (60mm opc. Motor power kW 2 x 1.5 Mill diameter mm 100 Mill height mm 49 (64mm opc.) Tool rotation speed rpm 9000

Condition: used, Number of boring spindles 10 St. Kedjw H Iv Tjpfx Abcsww Working width 230 mm Working height 160 mm Feed motor 5,5 kW Feed speed 6-36 m/min.

Condition: new, table length 2200 mm table width 1500 mm Kwsdpoupxwkefx Abcow stroke height 1850 mm weight max. in kg 2000 kg 260 mm total power requirement 1,5 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,45 t dimensions of the machine ca. 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, Year of construction: 2025, machine/vehicle number: 2128, functionality: fully functional, workpiece height (max.): 65 mm, edge thickness (max.): 15 mm, feed rate X-axis: 18 m/min, warranty duration: 12 months, HOLZ-HER Edge Banding Machine SPRINT 1329 multi, year of manufacture 2025, ex works delivery - Motorized pressure bridge adjustment - iTronic – automatic pressure and glue quantity control Kwjdpfx Abex Nqn Recow - Motorized adjustment of the infeed fence 1350 mm - Automatic chain lubrication - Vertical bottom nesting shoes - Edge-Control PPC 322W control unit with 21.5" color touchscreen - ECO-MODE energy-saving mode - Pre-milling unit FG501 with 2 milling aggregates - Glue application system GlueJet GJ725 for EVA and PUR in cartridge and granule form, swiveling 90 degrees - Storage chute for 1.5 kg EVA granulate - Motorized pressure unit D501 - End trimming unit KA501 - Milling unit FR701 Mot6 multi - Profile milling unit FF701 with 100% repeat accuracy - Scraping unit ZT502 Mot6 multi with motorized 6-axis adjustment - Surface scraper FK701 - Spray unit TR501 for infeed and outfeed - Spray unit GM501 after pressure unit for high-gloss edges - Buffing unit SW501 - Delivery time: immediately available

Condition: good (used), Weinig Hydromat H23 Kwedpfx Abewmw Nvecjw 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.