Dust collectors

Spänex TAW kompakt 215

Condition: good (used), Morsoe miter punch, machine number 48706, in good condition, available immediately. Hodpfx Ahjh Aka Ij Dsfr If you are interested, we will also inform you about other machines in our house. You are welcome to visit the machine in our house by appointment.

Condition: excellent (used), SCM F520 CE leveling machine Working width 520mm 4kw motor 4 knife shaft Traditional knives Hjdpfx Ahondhdtj Djfr Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm CE certificate

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 248, (Fast and functional drilling of series of holes thanks to interchangeable drilling gear system 32 with continuation examples) (5-spindle horizontal drilling gear allows simultaneous drilling of hardware and wooden dowels) Year of manufacture: 2009 Hfodpjt Ebibjfx Ah Der Machine number: 248 Maximum working pressure: 6bar Depth adjustment up to 550mm Vertical gear motor power: 1.6 kW Horizontal gear motor power: 0,75 Voltage: 380 V, 3 phases Injection pressure at 6 bar: 296 kg Weight without horizontal drilling device: 95 kg Weight with horizontal drilling unit: 118 kg Diameter of connection for chip extraction: 100 mm Volumetric flow rate: 141 m3/h Air consumption: 1.2 liters / stroke Work table: 800 x 970 mm Recommended base cabinet height: 950 mm Additional equipment: Extension rulers

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit Hodpfjv H D S Sjx Ah Dofr profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us. Hodpfx Ahoia Tauo Defr

Condition: good (used), Year of construction: 2022, Stow Hfsdpfx Ajqzhncjh Der Frames: 9000x1100x100 - 600 pcs - 95 EUR 9500x1100x100 - 200 pcs - 100 EUR 10000x1100x100 - 90 pcs - 105 EUR Beams: 2700x130 mm (3000 kg load capacity) - 8744 pcs - 11 EUR 3600x160 mm (4000 kg load capacity) - 378 pcs - 14 EUR Leg protections - 890 pcs - 6 EUR/pc

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ⭐€10,850 EXCL.VAT & SHIPPING⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Hfsdpfxjc Uthdo Ah Djr Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height : 561 [mm] ✔️Filter system : double layer water curtain ✔️Filtering material : city water, plate filter and mechanical separator with backwash ✔️Filter material cleaning : thin and thick grid ✔️ Pump output : 1.5 [kw/h] 940 [d/d] x 1 piece ✔️Number of fans : 1 piece ✔️Fan performance : 5,400 m3/h x 1 ✔️Fan motor power : 3 kw/h ⭐The cabins can be made of galvanized sheet metal or stainless steel. They can be designed to be integrated into the automatic and manual systems. ⭐At the pool there is a platform for material and personal safety. The platform covers the entire pool. ⭐In the Filterline wet painting booth, environmental pollution is prevented by the simultaneous use of 3 different filter systems. ⭐Wet paint particles, sucked in the air by a suction fan, are caught by the water curtain at the back of the cabin and transported into the pool. ⭐Wet paint particles in the trace amount that are not caught by the water curtain are caught by the separators on the suction ducts on the back of the water curtain, and the fresh air outlet is from the flue. ⭐The backwash system is applied in the separator section to help the process of retaining the wet paint particles of the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized. ⭐While paint dirty water accumulated in the basin enters the pump suction chamber, it goes through a coarse and a fine mesh to prevent clogging of the pump spray water, thus ensuring paint particles are retained. ⭐When the dirty water in the pool becomes unusable, it can be disposed of from the waste water valve located behind the grates in the suction department. ⭐By using a paint separator system, the water in the pool is cleaned from the paint and used continuously. ⭐The separated paint residues are drained by a filter press and must be disposed of properly. ⭐Price quoted is for the smallest standard size in stainless steel. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: used, Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg Surface planer F 410 N ----- Technical manufacturer's description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Hfedpfx Ajwzmu Djh Der Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----- Price of the above machine on request! ----- (technical data according to manufacturer - without guarantee!) All prices quoted are net and subject to VAT.

Condition: new, Holzkraft VPS 2241 VR Vertical panel saw 5600241 Precise vertical panel saw Smooth and ergonomic operation Pre-scoring device for tear-free cutting quality Slat deflection is manually operated by a lever Hsdskktcfepfx Ah Djfr Continuous central workpiece support Two dimensional stops Transport rollers lifted by pedal for easy movement of heavy panels without damaging them Fixed material support for stable workpiece position Modular welded machine frame torsion-free and self-supporting Saw unit with chain guide and two operating levers Large opening for saw blade change TECHNICAL DATA: General information Cutting height 2200mm Cutting length 4100mm Cutting depth 60mm Saw blade diameter 250mm Saw blade speed 4800min¯¹ scoring saw blade diameter 80mm Scoring saw blade speed 8500min¯¹ Stops 2pcs Sound pressure level 89,2dB(A) Dimensions and weights Height (product) max. 3100mm Length (product) approx. 5300mm width/depth (product) approx. 1800mm Height (product) approx. 3000mm Weight (net) approx. 600kg Connection suction Suction connection diameter 1 x 100mm Air requirement suction min. 1000m³/h Air speed min. 20m/s Electrical data Power drive motor 3kW Supply voltage 400V Mains frequency 50Hz SCOPE OF SUPPLY: Saw blade Ø 250 x 30 x 3,2 mm Z80 trapezoidal scoring saw blade Ø 80 x 2,8-3,6 mm Z20 Holkraft dealer - accessories available on request!

Condition: ready for operation (used), Technical characteristics Open cab Cabin dimensions: 2500 x 1500 mm 2 suction fans Motor power: 4 kW 2 neon lights for interior lighting Hfsdpfstv Thrsx Ah Dsr Power and Motors Overall dimensions