Panel sizing circular saws

Steton Typ SC 400/3200

Condition: used, power: 5.5 kW (7.48 HP), planing width: 520 mm, actuation type: pneumatic, Usable working width 520 mm Total table length 2310 mm Knife shaft diameter 120 mm Planer shaft speed 5000 rpm 4 knives 35x3x520 mm Aluminum fence 1200x190 mm Fence angle adjustment from 90° to 45° Min./max. planing height 3 / 250 mm Feed rate (thicknessing) 5-8-12-18 m/min Dust extraction port diameter (planing) 120 mm Dust extraction port diameter (thicknessing) 120 mm Iodpfxez Aukao Aniotn including: Tersa knife shaft Auxiliary fence Planer safety guard Electric thickness table adjustment

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm Itjdeh Nvyzopfx Anisn -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Itodpfx Asmiik Tjnion Height: 1560mm

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm Itodpfjuh R R Eox Anien - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right Itjdpfx Anorg Exrsion 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave

Condition: used, Year of construction: 1990, with hydraulic height and swivel adjustment Used, good to excellent condition Manufacturer: Panhans Model: 690 Year of manufacture: 1990 Machine no.: 705 GS-tested Upgraded motor 5.5 kW Cutting width approx. 1250 mm Cutting length approx. 2700 mm Max. cutting height 145 mm Swivel up to 45° Parallelogram guard Isdpfxowkvwto Anijtn Table extension approx. 1000 mm Hydraulic height adjustment Hydraulic swivel adjustment Extraction connection D 120/80 mm Required space approx. 3200 mm x 3500 mm x 1400 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without guarantee or warranty.

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Itjdpfxsuzkxxo Anisn Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit Isdpfottakhex Anijtn - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: new, functionality: fully functional, input voltage: 400 V, Application of a spiral shaft with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional knife shaft. A key advantage of carbide inserts is the ability to replace or rotate individual knives in the event of damage, significantly reducing operating costs. Carbide-tipped blades enable chip-free planing and optimal smoothness on any type of wood. Perfectly even thickness planing ensured by the centrally guided column table with central support. Processing accuracy of 0.1 mm, adjustable via a digital indicator on the handwheel. High working comfort due to the noise-reducing guard. Precision-ground thicknessing table for workpieces up to 230 mm in height. Standard equipment includes table extension with integrated rollers. Iodpfx Ansytc Suoiotn Chain drive ensures precise feed of the workpiece. Numerous safety features: no-voltage release switch, limit switches to prevent unintentional activation, emergency stop switch. Technical specification Thickness planing width: 410 mm Material height clearance (min.): 5 mm Material height clearance (max.): 230 mm Table size (width): 930 mm Table size (depth): 410 mm Maximum chip removal in thicknesser: 5 mm Minimum planing length: 150 mm Cutterblock diameter: 95 mm Number of knives/inserts on cutterblock: 72 pcs Cutterblock speed: 4050 rpm Feed speed: 6 m/min Extraction port diameter: 100 mm Motor power: 4.2 kW Motor power S1 100%: 3.0 kW Voltage: 400 V Dimensions (width): 1110 mm Dimensions (depth): 710 mm Dimensions (height): 1020 mm Weight approx.: 239 kg Scope of delivery Spiral cutter head with 72 TCT knives Spare TCT knives (5 pcs) Digital thickness table height indicator Table extension with rollers

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Itsdpfx Anexbnyrsisn Spindle diameter: 35 mm Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator CE certified DTR technical documentation Year of manufacture: 2005