Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Nledpfx Ahjmhh Anonsf 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Separator element for pallet racking system. Suitable for frames with a depth of 1000-1050-1100 mm. Arm length: 500 mm For a 2700 mm bay with 6 arms, 24 pieces – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms, 46 pieces – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms, 4 pieces – 51 EUR + VAT/piece If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available include: Nlsdpfsk Tzzlox Ahnsf Frame, corner, and impact protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code, location, and the desired quantity of items. Further service offerings: Planning, shelving assembly/disassembly, purchase/sale Subject to changes and errors in technical data, specifications, and prices, as well as prior sale!

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Njdpfx Ahonwmwvenelf Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used!

Condition: good (used), Approx. 870 shelving units SSI Schäfer R3000, shelving units approx. 1m x 0.40m - used: Price per unit: only €8.50 (net), packaged and loaded on-site! Minimum order quantity: 1 pallet (approx. 180 units) Manufacturer: SSI Schäfer Type: R3000 Nljdpfx Aheki T Aksnef Year of manufacture: unknown Dimensions: approx. 1m x 0.40m 870 shelving units Load capacity per shelf: min. 100 kg Condition: good Available: immediately Location: Frankenberg / Saxony

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4300 Total length: approx. 390 mm Useful height: approx. 295 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,070 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Nledpfx Ahspbvgdjnsf Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Year of construction: 2019, approx. 554 shelves for racking system / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various - second-hand - : Price per shelf: 9.-€ (net)! Minimum purchase: 50 pieces Nlodpfx Aordgawohnef Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 49cm = bay depth: 50cm Width: approx. 1.28m (bay width 1.30m) = 434 pieces Width 1m = approx. 120 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: immediately Location: Frankenberg / Saxony Frankenberg / Saxony

Condition: new, Wide-span shelving unit, new Dimensions: L 2550 x H 2000 x D 600 mm Includes 4 shelves Shelf load capacity: ~250 kg with evenly distributed load Nedpfx Aecfb Alehnolf #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: 2x Shelf uprights, 600x2000mm Unassembled, includes cross and diagonal braces, Plastic footplates 8x Crossbeams 2450mm, Includes locking pins 4x Shelves 2440x545mm, Thickness: 22 mm

Year of construction: 2021, condition: new, 1 shelf unit with 4 uprights for €2,120.00 (net)! Surcharge for cantilever arms with stoppers for this shelf: €40.00 Price for transport within Germany (excluding islands): €490.00 (net)! Of course, you can also create longer or shorter shelf units by omitting or purchasing additional frames (or by using different center distances); this example with 4 frames is just the most common shelf solution! A cantilever shelving system, hot-dip galvanized, consisting of: Shelf uprights, single-sided, approx. 3500 mm high, hot-dip galvanized Nedpfxsddmqno Ahnolf Base and arm depth 1200 mm, each with 3 height-adjustable shelf arms Load capacity with load center at 600 mm: 750 kg per arm / 2250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3000 kg With longitudinal and diagonal braces, e = 1300 mm, standard is 1.30 m. Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! A small surcharge will be added to the stated price for lengths from 1.50 m onwards! Custom sizes (different center distances) are also available upon request, but they also incur a surcharge and have a longer delivery time as they need to be manufactured separately! If you do not specify any different center distances, we will supply the shelf with a center distance of 1.30 m. In this case, the length of a shelf row with 4 uprights (3 bays) is approx. 4 m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) can be selected! Please contact us!

Condition: good (used), SLP traverse, RTS 110, used, 3000 kg shelf load Price plus VAT. The product is also available in other quantities and configurations. This package includes: 1 x traverse, 2.70 m (orange) 2 x locking pins Optional: chipboard, 38 mm thick, incl. deep stringers for €90 per level Manufacturer: SLP Condition: used, good condition Traverse length: 2.70 m Shelf load: 3000 kg 5000 units available Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guardrails Grating Rear wall grating Deep stringers Barrier railings and much more... Just ask us! Nlodpfx Ahsigquaonof

Condition: used, Size: 200x1280 mm 3 EUR/piece 100x1280 mm 1.5 EUR/piece If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Further accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please request shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Nodpfx Ahoik E Npjnjlf Planning, shelving installation/disassembly, buying/selling Changes and errors in technical data, specifications, and prices, as well as sales pending, are subject to change!

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) Nlodpfxsh Ek Das Ahnjf - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: good (used), Price plus VAT. The goods are also available in other quantities and designs. This package includes: 8 x uprights, 5,000mm x 1,100m (blue) 56 x crossbeams, 2,700mm (yellow) 112 x locking pins This results in a shelving row with 7 bays, each with 4 levels + floor space = a total of 105 pallet spaces (800kg/pallet). Approximately 70 uprights and 1000 crossbeams are available for this system. Please contact us. Njdpfx Ahoibwrijnelf Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Length: approx. 19.70 running meters Shelf depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Bay load: 2400 kg Row load: 12000 kg Pallet spaces: 105 Accessories such as: Floor anchor Connector Load warning signs Impact protection Guard rails Grating Back panel grating Deep shelf support Barrier railing and much more… Just ask us!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: frame: IPE220, arms: IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Nledjfivg Rjpfx Ahnof Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: new, Load Weight Shelf 28000 kg Loading weight per level 2000 kg Nlsdpfx Ahefgyhhsnsf Number of load levels 2 x 7 Stk. Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard Nsdpfod Tqalex Ahnslf - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: good (used), For frame depth 750 mm. All other sizes are shown in the images. Price: 0.50 EUR In stock: 3000 pieces Nljdpfxof R Ha Io Ahnjf If you require shelving or accessories in other configurations or designs, please contact us. Shipping: Please inquire about the shipping costs, providing your postal code and city, as well as the desired quantity of items.

Condition: used, 0 . kg dimensions . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nedpfx Ajyycygohnolf If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical specifications Nlsdpox Dir Uefx Ahnof • Uprights: width 1000 mm, height 5000/5500 mm • Three loading levels with beams (length 2700/4000 mm) • Total of 32 beams • Certified load capacity • Complete with wire mesh panels (1000 x 900 mm) • Stock available: 150 linear meters

Condition: excellent (used), Year of construction: 2019, Flow rack Manufacturer: BITO 2880x2700x2500 mm Flow racks are divided into slightly inclined flow levels and designed for supplying goods using the FIFO principle (First-in-First-out). The racks are loaded from the rear, and the goods move over plastic rollers to the opposite side, from where they can be picked as needed. Advantages: Allows for high picking performance Prevents downtimes caused by missing replenishment Optimal for fast- and medium-movers Five times higher picking frequency compared to standard shelving We have several sizes in stock! Nedpfx Ahswwugtjnslf If interested, please contact me.

Condition: excellent (used), Cantilever rack, double-sided, 10 levels, arm extension 380 mm, extendable by 220 mm, height 2420 mm, total depth 1000 mm, length approx. 2700 mm, cantilever arms made of 80 mm U-steel, very robust design, the rack is hot-dip galvanized, weight 1190 kg, rack disassembled for transport. Nsdpjw Icyujfx Ahnjlf

Condition: good (used), Year of construction: 2019, Pallet Racking, Nedcon, Height 2.50 – 2.70m, Beam Lengths 3m and 4m, 500kg per pallet, max. 5,600 pallet positions, - used - : Nlodjw D Ewvopfx Ahnof Price ex location: only €65,000 (net), dismantled, packed, and loaded, for full purchase including numerous short beams and both short and long end-of-aisle protectors / guard rails (for double and single runs)! Price for partial quantities: Frames: €45 each Beams: 2m: €14 each 3m: €18 each 4m: €22 each Manufacturer: Nedcon Type: Pallet Racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500kg Number of frames: approx. 900 units Most frames are equipped with upright protectors Frame height: 2.50m and 2.70m Frame depth: approx. 1.10m Beam lengths: 4m min. 624 units (beam height e.g. 12.5cm / support approx. 5cm) 3m min. 518 units (beam height e.g. 8.5cm / support approx. 4cm) Some 1m and 2m also available Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Condition: used, Price plus VAT. The goods are also available in other quantities and configurations. This package includes: Njdpfx Asyg Ix Hohnjlf 11 x frames, 4,500mm x 1,100mm (blue) 11 x U-shaped column protectors, used 60 x beams, 2,700mm (orange) 100 x picking beams, 2,700mm (orange) 50 x shelf panels, 270cm x 110cm x 22mm 28m mesh rear wall, 300cm high -> 84m² This results in a racking row with 10 bays, each with 8 levels + floor level = total of 90 pallet spaces (800kg/pallet) 50 x picking levels 270cm x 110cm with 500kg/position Approximately 280 frames and 2,000 beams are available for this system. Contact us for more options. Manufacturer: Mecalux Condition: used, good condition Height: 4,500 mm Length: approx. 28.10 m Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Compartment load: 2,400 kg Bay load: 7,200 kg Pallet spaces: 96 Accessories such as: Floor anchors Connectors Load warning labels Collision guards Safety rails Wire mesh decking Rear mesh panels Depth support bars Partition railings ...and much more. Feel free to contact us for further information!

Condition: new, total width: 600 mm, total height: 2,000 mm, total length: 2,000 mm, shelf length: 1,850 mm, Mega-M FORTIS LIGHT storage rack – new. The Mega-M FORTIS rack is made of high-quality powder-coated steel. It has a solid and durable construction. It consists of a strong frame and steel crossbars as well as shelves with additional reinforcements. All this contributes to its durability and high load capacity. The shelving unit can be quickly and easily assembled and rebuilt to suit your needs. Therefore, it will never lose its versatility. The metal shelving unit can be used to store bulky items weighing up to 200 kg on a single shelf. It allows for the storage of storage containers, workshop accessories, production materials, tools, preserves and seasonal products. The modular shelving unit is ideal for both industrial and domestic use. Its wide range of applications allows the shelving to be used in: warehouses, shops, wholesalers, workshops, offices, archives, garages, basements and pantries. Fortis Light shelving facilitates access to products on the shelves. The offer applies to the following shelving: Item number: MPP000890 Number of shelves: 4 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Rack type: Base module Rack height (cm): 200 Rack length (cm): 200 Rack depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €135.00 net per set. Item number: MPP000891 Number of shelves: 4 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Shelf type: Base module Shelf height (cm): 200 Shelf length (cm): 200 Shelf depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €118.00 net per set. Item number: MPP000901 Number of shelves: 5 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Shelf type: Base module Shelf height (cm): 200 Shelf length (cm): 200 Shelf depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €158.00 net per set. Item number: MPP000902 Number of shelves: 5 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Shelf type: Base module Nlodoyfgdrepfx Ahnsf Shelf height (cm): 200 Shelf length (cm): 200 Shelf depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: £140.00 net per set. Item number: MPP000903 Shelf load capacity (kg): 200 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €29.00 net per set. Item number: MTP003781 Rack height (cm): 200 Rack depth (cm): 60 Net price: £25.00 net per set. * For larger quantities, the price is negotiable. * Transport possible throughout Europe. * Location: 39-442 Chmielów, Poland.

Condition: new, High-quality grid decking with high load capacities, a cost-effective alternative to grid grating – new product – Prices available upon request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (so, for a 2.70m beam, 3 deckings are required = 2,655mm) 1335mm Frame depths: 1.05m 1.10m 1.20m Other depths available upon request! Uniformly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1,000kg, i.e., also per pallet Grid spacing: 50 x 100 or 25x100mm When making an inquiry, please also specify the type of beam (crossbeam) you have! I.e., whether it is a box profile (or IPE beam) 50 or 40mm, or whether you have crossbeams with a step. Advantages: no sharp edges 200% safety factor – independent of the shelving beams Tested for permissible deflection and structural failure Wide selection of standard sizes and load capacities MantaMESH is our market-leading wire mesh decking solution. Nlodpeiuvxbefx Ahnjf MantaMESH provides assurance with more than 70% open area and a safety factor of 200%, exceeding the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR sprinklers. Compatible with ANSI MH 26.2 - 2007 Made in Germany Pre-welded, hemmed support channels Pre-galvanized finish Maximum deflection independent of the rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of the beam: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration – we would be happy to create a configuration for your application! Depth 1102mm Width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the beams Front: folds out 30mm Rear: folds down 30mm on the outside Item weight 9.43kg

Condition: excellent (used), Year of construction: 2019, Flow Rack, FIFO Rack Manufacturer: Bito 2050x1800x2100 mm We have various flow racks: - straight - straight/bent - bent Flow racks are divided into slightly inclined flow levels and designed for goods provision according to the FIFO (first-in, first-out) principle. The racks are loaded from the back, and the goods move on plastic rollers to the opposite side, from where they can be retrieved as needed. Advantages: Nljdswlg Rmepfx Ahnef Enables high picking performance Prevents idle times due to a lack of replenishment Ideal for fast- and medium-moving items Five times higher picking frequency compared to shelving We have several sizes in stock! If you are interested, please contact me.