Optimization cutting saw

STROMAB TR-500 MATRIX-6000

Condition: new, Year of construction: 2025, machine/vehicle number: MR006589, High-quality, high-speed crosscut saw with automatic feed system and optimization software. This machine is equipped with a feature to detect faults in the material using chalk markings and comes with the following options: - Pneumatic feed cylinder right of the saw - Pneumatic feed cylinder left of the saw - 'OPTI' package with material length detection and additional optimization criteria - 'OPTI PLUS' package with photocell recognition of material defects - Machine with outfeed table (per meter) - Label printer - MO9416XLTD Technical specifications: - Mitre angle: 90° - Maximum cutting length: 360 mm - Maximum cutting height: 135 mm - Maximum feed length: 6000 mm - Saw list import: Yes - Chalk mark sensor: Yes - Maximum saw blade diameter: 500 mm - Motor power: 10 hp - Serial number: 10561 Bwsdjy I N Akspfx Aigor

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Bwodpfehuthyjx Aigor Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use.

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Bwedpshw Ng Ijfx Aiger Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Bwedpfx Aiewgbxzegjr A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, total length: 9,500 mm, total width: 4,500 mm, total height: 2,050 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, VS-3015CE 6KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Bjdjv Ngrajpfx Aigswr Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 Bwsdpfx Aowl Hyusigjr At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, DCV series extractors in the TC Viber version have been created. Designing a new technological line has allowed us to create high-class extractors Advantages has an additional pair of doors for easier bag replacement DCV 6500TC extractor is another milestone in the production of efficient sawdust and dust extractors whose aim is to constantly provide the same extraction parameters during the entire work cycle. the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Failure-free filter shaking system with the possibility of working in an automatic cycle Bsdeuc U N Uspfx Aigswr The new patented security system on the market guarantees failure-free operation of the device, durable, massive construction guaranteeing quiet and vibration-free operation of the extractor takes up little space and yet can extract large amounts of dust and chips > strong and quiet fan guaranteeing high vacuum efficiency! failure-free operation confirmed by production plants dealing with large orders every day they have a special blade design, making them more efficient and effective, and also contributing to energy savings very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 6500 extractors quick replacement of waste containers designed in such a way as to maintain 99.99% airtightness of the system, metal waste containers with a mobile driving system facilitating trouble-free movement. Also equipped with a peephole to help check the level of filling of the containers low noise and high efficiency are ensured by a balanced metal rotor and an improved engine ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. Control cabinet for switching the device on / off We guarantee high quality of cleaning !!! polyester filter stops dust up to 5 microns in diameter, to filter smaller particles, use a filter such as HEPA It is forbidden to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw material, e.g. wet sawdust) Before starting the extractor, dismantle the lower beam to have free access to the containers for shavings POLISH PRODUCTION Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION EFFICIENCY 6500 m3/h SUCTION PORT DIAMETER 280 mm SPEED SUCTION 28-32 m/s FILTER SURFACE 16 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 32 WASTE CONTAINER CAPACITY 500 L DIMENSIONS 2440 x 930 x 2270 mm WEIGHT 440 kg

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Bodpfexraucox Aigewr Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, total height: 1,895 mm, total width: 1,980 mm, overall weight: 1,580 kg, spindle motor power: 5,000 W, product length (max.): 2,950 mm, spindle speed (max.): 24,000 rpm, This 3-axis HOMAG WEEKE OPTIMAT BHX 055 was manufactured in 2018. It features a workpiece length capacity of 200 - 3,050 mm and a workpiece width of 70 - 850 mm. The machine includes 13 vertical drilling spindles and 4 horizontal drilling spindles, providing versatile machining capabilities. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG WEEKE OPTIMAT BHX 055 machine we have for sale. Contact us for further details. Bwodpfjzc R Hfsx Aiger Used Vertical CNC Machining CenterBrand: HomagType: Optimat BHX055Year of manufacture: 2018Technical data • Vertical CNC drilling and machining center • Workpiece length 200 - 3,050 mm • Workpiece width 70 - 850 mm • Workpiece thickness 12 - 60 mm • Milling spindle 1 unit • Main spindle power 5 kW • Max. speed 18,000-24,000 rpm (depending on configuration) • Tool holder HSK-F63 or ETP25 • Tool changer 4-position magazine • Vertical drilling spindles 13 • Horizontal drilling spindles (X) 4 • Horizontal drilling spindles (Y) 2 • Grooving saw X-direction • Control system Homag powerTouch / Power Control PC 86 • Software WOODWOP 7.x • Total connected load 11.5 kW • Compressed air requirement 7 bar • Machine weight approx. 1,580 kg • Footprint (L × W × H) approx. 2,950 × 1,984 × 1,895 mm • CE markingNote:The technical data and descriptions are copies of the original order confirmation. This information is provided for informational purposes only and is not binding.

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Bjdoxg Rhvopfx Aigewr