Universal milling machine Unimac FM 1

Unimac FM 1

Condition: used, Technical specifications: Lhodpfxsxtnn Tj Abysh X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm Lhsdpfsg Trvrex Abyoh 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: used, Year of construction: 2000, turning diameter over bed 440 mm turning diameter over slide rest 270 mm turning length 1.500 mm center height over bed 220 mm digital readout FAGOR 3 Achsen turning diameter in the gap 620 mm centre distance 1.500 mm bed width 280 mm spindle bore Ø 52 mm turning speed range 30 - 2.360 U/min 3-jaw-chuck diameter 250 mm quick change toolholder KLOPFER Typ GX2B drive capacity - spindle motor 6,3 kW taper in tailstock-quill MK 4 dia. of quill 60 mm quill stroke 200 mm voltage 380 V Ljdpoykb Hfsfx Abyshh total power requirement 6,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,90 x 1,10 x 1,75 m - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm - Coolant device

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Lodpfx Abjw Rlvqoyehh Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: good (used), NHH lathe Lhsdjmw Ukcopfx Abyeh Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Lodpfehakfajx Abyehh Year: 2003 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: Ledpfsv Rgzwjx Abyohh 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, Ljdpemhfrrjfx Abyohh RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg Ledpfeyf Ehijx Abyehh - Machine vice

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting Lhjdpfxeu Idhye Abyeh *