Spraying machine VEN SPRAY Perfect, 2018

Venjakob VEN SPRAY Perfect

Condition: used, Year of construction: 2011, Technical data: - VEN SPRAY PERFECT automatic spraying machine - Year of manufacture: 2011 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Parts detection via light curtain - CNC 7000 control system - Right-hand side operation - Z16 dual gun drive - Water-sprinkled extraction system - Extraction system in stainless steel design - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Paint recovery system via V-band - Feed speed continuously adjustable 3 - 9 m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 2 pcs. - Number of installed spray devices 4+4 pcs. - Number of material pumps 2 pcs. - Supply air filter ceiling G5 - Length ~ 6,590 mm - Width 3,666 mm (+1,152 mm) - Height 2,500 mm - Total connection 22 KW Hedpfx Aaeytuade Sjff - Volts, Hz 400 / 50 - Colour RAL 7035 - Location, in stock from Voltage fluctuations max. +/- 5 % The photos show the spray machines before the overhaul. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NCG3021L(LL) is a high-performance CNC nesting machining center engineered for automatic cutting, drilling, grooving, and part labeling, all within a fully integrated and automated workflow. This model incorporates automated loading, unloading, and labeling systems, delivering comprehensive automation, intelligent operation, and IT-driven production efficiency. Its open software interface enables seamless connectivity with furniture design suites and ERP platforms, ensuring fully optimized and data-driven panel processing. The professional FCC optimization software enhances cutting efficiency, minimizes material waste, and facilitates streamlined production management. This machine represents an ideal solution for advanced furniture manufacturing by reducing labor expenses while maintaining high standards of precision and productivity. Key Features - Automatic loading and unloading system equipped with a 3-ton lift table, pre-push device, and safety curtains for efficient material handling. - Rotary labeling system with integrated Honeywell printer, facilitating simultaneous labeling and machining operations. - Robust vacuum worktable (3100×2150 mm) segmented into 10 independently controlled zones, guaranteeing powerful and uniform vacuum suction. - Dual 7.5 kW oil-cooled vacuum pumps deliver maximum suction power at low noise levels. - High-rigidity gantry frame ensures enduring precision and operational stability at high processing speeds. - Italian-made 12 kW main spindle (HSK-63F, ATC, 24,000 rpm), featuring internal and external air blast for optimal dust extraction. - 12-position automatic tool changer (ATC) enables rapid tool changes, supporting a wide range of complex machining tasks. - 21-spindle drilling block designed for precise vertical and horizontal drilling operations. - Automated lubrication system minimizes maintenance needs and prolongs component life cycle. - Advanced dust extraction system with front and rear collection points maintains a clean working environment. - Comprehensive safety design includes a protective fencing system and optional optical barrier for maximum operator security. - User-friendly SYNTEC CNC control system compatible with MPR, DXF, TCN, and standard NC file formats. Technical Specifications - Working area: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Worktable height: 1010 mm - Maximum traverse speed: X/Y axes 70 m/min, Z axis 20 m/min - Main spindle: 12 kW, HSK-63F, 24,000 rpm - Tool changer: 12-position servo-driven ATC - Drilling block: 21 vertical spindles, 2.5 kW, 4000 rpm, max drilling diameter 35 mm - Vacuum pump capacity: 2 × 7.5 kW, 250 m³/h - Total installed power: 47 kW - Machine dimensions: 13,800 × 3,950 × 2,600 mm - Weight: 6,000 kg - Power supply: 380V / 50Hz / 3-phase Applications - Panel furniture manufacturing (kitchen cabinets, wardrobes, office furniture) - Nesting-based cutting and drilling of MDF, particleboard, and plywood - Automated production lines with integrated labeling for Industry 4.0 smart factories Hfsdpexcwnbofx Aa Sef Advantages - Complete solution: automated loading, nesting, drilling, grooving, labeling, and unloading in a single workflow. - Outstanding efficiency: optimized software paired with dual synchronized gantries doubles processing throughput. - Labor saving: minimal operator involvement required. - Ideal for large-scale production: stable operation, precise machining, and consistently superior product quality.

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm Hedpsv I Akvsfx Aa Soff - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Hodpfx Aewuz E Rja Soff Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: new, Year of construction: 2024, Tunnel type parts washer for metal and plastic parts. Used in different sectors like automotive, food, metal machining, sheet metal, plastic crates etc. Operation Principles The work piece enters in tunnel by means of belt conveyor system; the positioned nozzles wash every piece of the work piece. The work piece, while passing through the tunnel is washed by pressurized and heated water + chemical mixture. All oil, chip and other industrial contaminations are removed from the surface of work piece during this washing process. Tunnel washing machines are standardized as well as specially tailored according to application by INTERSONİK engineering department. Washing Process Flow Washing, passivation and drying are designed exclusively by the Intersonik Process Engineers in accordance with the desired results supported by Intersonik environmental friendly chemicals. Operation Process ► Pre wash ► Main wash ► Rinsing Hfsdpfsd I Azvox Aa Sof ► Passivation ► Drying Application Areas ► Automotive industry ► Military defense industry ► Food industry ► In all manufacturing industry for mass production and maintanance purpose ► Metal furniture industry Conveyor is specially designed and manufactured by INTERSONIK according to your needs and work piece. Conveyor speed is adjustible. Automatic liquid fill is standart. Electrical heating is standart heat exchanger and burner heating types are optional. All data is visible and controllable via digital screens PLC control is optional. All liquid tanks are isolated for heat retention. Mist collecting vacuum pump and unit is standart. Please feel free to contact with us for other options and details. tunnel washing, automatic washing, automotive parts washing, metal washing, parts washer, degreasing, spray washing, pressurised washing machine

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: Hodpfx Aasu Afu Rj Ssff - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: excellent (used), Year of construction: 2018, laser wavelength: 1,030 nm, power: 5 kW (6.80 HP), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 2: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 4: ≥ 4mm x mrad, ≥ 100µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Processing optics cooling: yes Water connection set: yes Ethernet in user area: multiple Number of occupied fiber links (LLK): 4 Hjdpjr Izwmsfx Aa Soff Number of intelligent optics: 4 Number of active couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA declaration: Installation declaration with annex

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Hodpfx Ashlp Efsa Sjff

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Technical Specifications: Hfjdpfxsv Np H Hs Aa Sof Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Max. operating temperature: 180 degrees Celsius Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Hfedpfxouiy Nys Aa Sef Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees