Used Broaching & slotting & drawing machines for sale (171)

Condition: used, Year of construction: 1986, overall weight: 6,500 kg, power: 42 kW (57.10 HP), input voltage: 380 V, broaching length: 1,600 mm, number of broaching positions: 1, workpiece diameter (max.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500kg Mach. No.: 3269 General / technical data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600mm Broaching stations: 1 piece! Passage width between the cylinders: max. 540mm Cutting speed: hydraulically stepless adjustable from 1 m/min up to max. 8 m/min Return speed: hydraulically stepless adjustable up to max. 18 m/min Required space for the machine: see image of machine layout plan Fpjdpfx Aaewqmaxobjn Power supply / connection value: 380 Volts 50 Hz / 42 kW Accessories / special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-mechanical locking (DIN 1417) in the pulling bridge. The tool feeder system is hydraulically-mechanically locked. The machine has a coolant system with integrated chip conveyor for installation in a pit. Remarks: The machine is still in its original paint. It is designed for use in mass production for medium and large batches; for optimal use, a foundation (pit) is ideally required. Pulling heads and needle pushers are available on request. The machine can be inspected at our warehouse. General information We constantly have a large selection of about 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock is ready for demonstration and inspection. If required, we can offer you used equipment such as pulling heads, needle pushers, broaching tools, and other specific accessories. We are also a contract broaching company and can assist you with technical questions from 50 years of experience in broaching technology.

Condition: ready for operation (used), Vertical - broaching machine Rausch Fpsdpfx Asdyp Rmjabjn Type RSIZ 6 / 1000 S Condition is used technical data: Working range : up to 1000 mm Cutting speed 3 to 5 m/min Return speed 10 m/min Interior: largest workpiece diameter 600 mm Outer chambers: area of the clamping plate 600 x 340 mm Coolant device Tensile force measuring device Automatic central lubrication Spindle protection by spring band spirals Chip conveyor shut-off counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight 1200 kg Self-collection or forwarding. We will be happy to help you organize an inexpensive forwarding agent. You are welcome to visit us for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their owners and serve only to identify and describe the products. The machines and tools are sold as is. The installation and electrical connection of the machine/device must be carried out or checked by a trained specialist. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: good (used), Grooving machine - Joint length: 300 mm - Groove width: max. 32 mm - Smallest bore: 40/17/6 mm - Cutting speed: 5 m/min - Face plate diameter: 360 mm - Driving power: 1,1 PS - Weight: approx. 220 kg - Outer dimensions: approx. 780 x 400 x 120 mm Good condition fully functional can be inspected and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. Fjdpfx Ajmidmzoabspn VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, Information on request Fsdpfx Aajwbudgobopn

Condition: used, functionality: fully functional, Year of construction: 1966, overall weight: 7,000 kg, input voltage: 380 V, broaching length: 1,500 mm, number of broaching positions: 3, workpiece diameter (max.): 575 mm, total height: 5,100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Fjdpfxswql Rve Aabopn Weight: approx. 6,700kg Machine No.: 2455 General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching stations: 3 units Distance between broaching stations: 2 x 145mm Mounting diameter of the draw heads: 3 x Ø 85mm Passage width between the columns: max. 580 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 up to max. 25 m/min Machine space requirement: (w x d x h) approx. 1,500 x 2,100 x 4,600 (h max. 5100 with raised tool feeder) Power supply / Connected load: 380Volt 50 HZ / 14kw Accessories / special features: The machine is equipped with a workpiece table with 3 holes for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, for optimal use, ideally a foundation (pit) is required or optionally a platform. Draw heads and ejector needles are available on request. The machine can be inspected under power at our warehouse. General information: We constantly have a large selection of approx. 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock are ready for demonstration and can be inspected. If required, we can offer you used equipment such as draw heads, ejector needles, broaching tools and other specific accessories. We operate as a contract broaching company and can also assist you with technical questions based on 50 years of experience in broaching technology.

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system Fpodpfx Aajtuuvzsbjn - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Fpsdpfx Aaeiw Dlkobsn Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable Fpsdpfx Aelpadyeabon maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Condition: not inspected (used), Forst RF 16 internal broaching machine -WKG 1371- Technical data: Manufacturer: Forst Fedpfxehu E N De Aabepn Type: RF 16 Max. Tractive force: 16t Max. Stroke: 1200mm Max. Cutting speed: 5,6m/min Max. Workpiece diameter: Ø 700mm Max. Tool diameter: Ø 120mm Workpiece seat: Ø 70mm Note: control valve missing

Year of construction: 1960, condition: not inspected (used), Forst RF 20x2000 internal broaching machine -WKG 189- Data: Fpedpfxehu E Ego Aaben Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. Tractive force: 20t Max. Stroke: 2000mm Max. Cutting speed: 5,6m/min Max. Return speed: 30m/min Max. Workpiece diameter: Ø 300mm Max. Tool diameter: Ø 90mm Weight: 3,5t Remark: without tub

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 60305, General / technical data: Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm Fpsdpoiqkb Rofx Aabsn maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Year of construction: 1964, condition: refurbished (used), machine/vehicle number: 2041, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 weight: 3,2 to broaching force: 8.000kg Fpjdpfsgyd S Dex Aabon With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1732, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI6DT Machine No.: 1732 Fpodpfx Aegyd Svjabsn Year of manufacture: 1960 weight: 3,2 to broaching force: 6.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1989, condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: Fpsdpfx Aaslu D Hksbsn The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Year of construction: 1966, condition: used, max. tractive force 5 t, max. stroke 850 mm, max. cutting speed 12m/min, max. return speed: 25m/min, clamping surface 410x575 mm, groove width 3 - 90 mm, bore 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base under floor 1.400 mm Fpedpfxjcm Elnj Aabon

Year of construction: 1961, condition: used, General / technical data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 weight: approx. 6.500kg tractive force: 10t clearing speeds: 1 - 11m/min return speeds: 7 - 25m/min maximum stroke: per machine unit 1250mm clamping area: 500 x 500mm passage width: 380mm power supply: 380 Volt / 50 Hz Remark: The machine is under power in our warehouse and can be inspected. Fpodpfx Aaelwu Hrsbjn

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in Fpsdpfxoixntws Aabon technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Year of construction: 1964, condition: good (used), functionality: fully functional, machine/vehicle number: 2016, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 16,000 kg clearing length: 1.250 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 2,200 x 1,550 x 4,200 (without pit) Power supply / connected load: 380Volt 50 HZ Accessories / special equipment: Fpedpfx Aast Dv I Aebjn The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and hydraulically mechanical in the feeder. The machine has been electrically (PLC Siemens S7) and mechanically modernized in 2004. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: used, functionality: fully functional, Manufacturer: Arthur Klink Year of construction: ca.1960 Type: horizontal broaching machine Model: RH 10-50 Machine. No.: 241 Fjdpfx Asr A Hdgjabopn Weight: 3.700 KG General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Clearing stroke: 1,500 mm Tractive force: 10,000 kg (100KN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece clamping surface: Ø 460mm Workpiece diameter: max. approx. 750mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: hydraulically infinitely variable from 5 m/min to 30 m/min Space requirement of the machine: (w x d x h) approx. 6500mm x 950 mm x 1,400 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 8kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter Accessories - 1 universal pulling head for flat shafts from 3mm to max. 25mm wide - Adapter sleeve for drawbridge from Ø 85mm to Ø 63mm Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is well suited for heavy profile broaching tools. The machine is used and is in very good condition for its age. The machine is in our warehouse and can be inspected under power. The machine is currently not technically and visually refurbished, but can be used immediately. Pulling heads for profile broaching are mostly available used on request depending on DIN standard, dimensions and stock. Direct contact details and further information can be found in the attached PDF document

Year of construction: 1971, condition: used, General / technical data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12to tractive force: 25to maximum stroke: 2000mm clamping surface: 500 x 500 table opening: 550mm power supply: 380 Volt / 50 Hz Accessories/ special equipment: Fodpfx Aelwvm Ajabspn - tilting table Remark: The machine is under power in our warehouse and can be inspected.

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 3273, Neff - internal broaching press machine type: vertical hydraulic broaching press Fpedpfjd N Rl Nox Aaben manufacturer: Neff Germany type: 16 SRKA built in: 1977 stroke: 1300 pulling force: 16.000KG working stations: 1 PCs drive: hydraulic system equipment: coolant system remark: machine under power in stock Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Fpjdegyd T Espfx Aabsn Year of construction: overhauled by manufacturer 1994 weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Fpjdegyd S Sepfx Aabon Rated current: 35 A Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1971, condition: used, General / technical data: Manufacturer: Forst Model: RSIA-20-1320 Year of manufacture: 1971 Weight: 6.000kg Tractive force: 20t Fjdpfx Ajlwu Spjabepn clearing speed: 5m/min return speed: 16m/min maximum stroke: 1320 broaching positions: 3 clamping area: 370 x 620 x 105mm Remark: The machine is under power in our warehouse and can be inspected.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General Fedpfjv Rpnmjx Aabspn The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.