Used cNC lathes up to 199mm turning diameter for sale (145)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1100026, spindle speed (max.): 3,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 4,500 rpm, number of slots in tool magazine: 19, Machine has been professionally cleaned TECHNICAL DETAILS Control: Siemens 840D Spindle Technology: Belt-driven spindle Spindle bore: 51 mm Speed: 4,500 rpm Workpiece clamping: Collet chuck, Hainbuch size 65 Tool Carrier I (XZ) Technology: Cross slide, 4 pcs Travel in X: 70 mm Travel in Z: 115 mm Tool mount: Turning tool holders Godpfxewr Ducj Ah Douk Tool Carrier II (X/Z) Technology: Turret with 7 stations and pick-up spindle Tool mount: VDI30 Tool drive: 3,000 rpm Workpiece clamping (pick-up spindle): Collet chuck Travel in X: 160 mm Travel in Z: 500 mm Tool Carrier III Technology: Turret with 8 stations Tool mount: VDI30 EQUIPMENT - Chip conveyor - Coolant management, KSS pumps - Bar loader, Gucchi Giovanni DB Evo - Collecting tray with conveyor belt - Mechanically prepared interface for oil mist extraction - Electronic handwheel for setup mode - Clamping devices and tool holders are not included in the scope of delivery

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7041138, Traub TNC42/65 No. 7041138 Year 2005 Turret 1 number of stations 10 Turret 2 number of stations 14 Driven tools Yes Spindle speeds 1/min 4000 Gusdjwpkfijpfx Ah Dek Spindle speeds on transfer 1/min 4000 Power kVA 39 Weight kg 5200

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D spindle passage 65 mm turning speeds 5.000 U/min max. torque at 40% / 100% load 145 / 105 kW turret-slide 1,2 und 3 x-travel 110 mm z-travel 360 mm y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 Guedpfewzynqsx Ah Dek C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Condition: new, Year of construction: 2022, functionality: fully functional, turning diameter over cross slide: 120 mm, turning diameter: 170 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 2,200 W, spindle nose: Ø85 mm, TECHNICAL DETAILS Maximum X-axis travel: 170 mm Maximum Z-axis travel: 170 mm Maximum machining diameter (with chuck): 60 mm Maximum machining diameter (with collet chuck): 26 mm Maximum machining length: 120 mm Swing diameter over carriage: 120 mm Spindle bore: 34 mm Maximum bar capacity: 26 mm Gedpfxow A Hwnj Ah Djuk Spindle nose: Ø85 mm Hydraulic chuck: 4" Spindle motor: 2.2 kW / 3 H.P. Spindle speed range: 100 - 5,000 rpm Rapid traverse (X & Z axes): 15 m/min Minimum input increment: 0.001 mm Cutting tool size: 16 mm Max. tool-bore diameter: Ø20 mm Coolant pump motor: 1/4 H.P. MACHINE DETAILS Dimensions (LxWxH): 1,200 x 1,000 x 1,500 mm Machine weight: 1,058 kg Minimum programmable unit: 0.001 mm EQUIPMENT - Chip conveyor - Parts catcher, parts chute - 1 set of collets - F32 collet chuck - Parts catcher - Chip cart - 8-station turret and linear guide system - Hydraulic through-spindle clamping device for chuck and collet operations - 100 mm Ø chuck - Flat guideways on Z axis - Central lubrication - Coolant pump

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 58 mm, turning diameter: 39 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 750 mm, workpiece length (max.): 65 mm, CNC lathe with comprehensive accessories and Fanuc robot! TECHNICAL DETAILS Guedpfxjwym Die Ah Dok Turning Workpiece diameter: 39 mm Max. part length: 65 mm Max. turning length: 58 mm Axes X-axis: 750 mm Z-axis: 180/140 mm Rapid traverse (X): 60 m/min Rapid traverse (Z): 30 m/min Acceleration (X/Z): 7 m/s² Tool offset axis: 3 mm Main spindle Spindle speed: 6,000 rpm Drive power - spindle motor: 13.7 kW MACHINE DETAILS Control Control system: Siemens Tools Tool holder for turning tools: Capto C4 EQUIPMENT Step feeder, manufacturer Knoll Chip conveyor, manufacturer Knoll Robot, manufacturer Fanuc Tilting device, manufacturer Sachwarz Hydraulic power unit, manufacturer Bosch Rexroth

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW weight of the machine ca. t Gedpfet Hwz Aox Ah Deuk dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed

Condition: good (used), Year of construction: 2012, turning diameter: 200 mm, spindle speed (max.): 3,500 rpm, overall weight: 7,200 kg, chuck outer diameter: 254 mm, Muratec MW200 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár Gusdpfx Ahsv I Udze Djk

Condition: used, Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have an Okuma Genos CNC lathe for sale, fully operational and immediately ready for work. The machine is in excellent working order, regularly maintained and serviced. Gusdpfsw Np S Hox Ah Dek - Main spindle and sub-spindle - Tool probe - Parts catcher Spindle speed: 3,800 rpm Technical condition: Good. The machine was purchased new for our facility in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. It is possible to inspect and test the machine under working conditions at our site. The decision to sell is due to changes in our projects. Optionally, an LNS bar feeder is available for €10,000 and an oil mist separator for €1,500 (both visible in the photos).

Condition: new, Year of construction: 2022, functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 170 mm, bar passage: 26 mm, TECHNICAL DETAILS Machining length: max. 120 mm Spindle motor S3 50% duty cycle: 3 kW Spindle motor S1 100% duty cycle: 2.2 kW Chuck: hydraulic 4-jaw Tooling Tool holder: □16 × 16 mm / Ø 20 mm Linear tool slide with boring bar holders: 3 Tool turret: 8-position SERVO MACHINE DETAILS Control CNC: FANUC 0i-TF Plus Mate-TC Interfaces: RS232 and PCMCIA Display: line graphic Screen: 10.4" Godpfxswx Ills Ah Deuk Electrical Connection Operating voltage: 400 VAC, 50 Hz Connected load: 5 kVA Machine Dimensions Length × Width × Height: 1,200 × 1,000 × 1,500 mm Weight: 1,058 kg EQUIPMENT Model 25 collet chuck (161E) Foot switch for collet chuck OPEN/CLOSE Compact parts catcher and conveyor belt Automatic belt chip conveyor including chip trolley Coolant system Handwheel Central lubrication unit Workspace lighting

Condition: good (used), Year of construction: 1997, Index ABC Year of manufacture 1997 Machine number 400621 Spindles: 1 Max diameter: 50 mm turrets: 2 Gujdpjhd U Hfjfx Ah Dok Positions: 8 on turret 1 / 6 on turret 2 C axis is programmable 1 synchronous spindle in the machine + 2 for regeneration High pressure pump: yes, 30 bar

Condition: used, Year of construction: 2003, turning diameter 175 mm control Fanuc spindle tunring speed 6.000 U/min number of tool places 12 Pos. x-travel 125 mm z-travel 120 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Godpfx Aewth R Rjh Douk Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2001, The used TAKAMAZ X20 HI SERVER 2-axis CNC lathe with gantry loader is a fast, medium-sized 2-axis inclined bed CNC lathe with tailstock, equipped with an automatic loading and unloading system for parts with a palletizer with FANUC 18TB CNC; in excellent general condition, year of construction 2001, compliant with “CE” standards Godpswqxt Dofx Ah Deuk Main features: ASA 6 spindle nose Main spindle power 7.5 kW Main spindle bar passage 51 mm Turning diameter 260 mm Turning length 450 mm Number of spindle revolutions 4000 RPM Number of turret tool positions 12 X-axis travel first turret 165 mm Z-axis travel first turret 500 mm Rapid linear axes X Y Z 24 m/min Belt chip conveyor

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High-precision lathe DMG Mori Wasino G 100/480 Year of manufacture: 2017 Control: Fanuc COMPACT line Temperature response (at cold start): ø 2.0 μm Roundness: 0.5 μm Technical specifications: Spindle speed: Gjdpfjvi Ifzjx Ah Deuk Drive power: Turning diameter: 285 mm Turning length: 280 mm Bar capacity: 38 mm Travel paths: X-axis: 480 mm Z-axis: 285 mm Accessories - 3 live tools - Rigid tool holder package - Fire extinguishing system - Machine has only been run under oil - Chip conveyor

Condition: used, Year of construction: 2002, MIYANO ABX-51SY Gujdpov Ipg Rofx Ah Dsk with: Fanuc control, chip conveyor, bar loading magazine MULTIFEED

Condition: new, Year of construction: 2024, functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Gsdsug Up Nepfx Ah Djuk Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray

Condition: good (used), Parts shown by hand not come. Technical details shown on picture. Tools in wooden box will come with machine. Gsdpfxjwb Epte Ah Dsuk

Condition: used, Year of construction: 1996, swing diameter 530 mm Guodpsvh Nbnefx Ah Dok turning diameter 150 mm spindle passage 65 mm control SIEMENS 840 C travel x1 175 mm travel y1 +/- 70 mm travel z1 433 mm travel x2 175 mm travel y2 +/- 70 mm travel z2 433 mm spindle turning speed range 38 - 4000 U/min C-axis 2 x tool turret 2 x 12 Pos. number of driven tool stations 2 x 12 tool shaft (cylinder shaft DIN 69880) VDI 30 total power requirement 33 kW dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant

Condition: excellent (used), Year of construction: 2006, The used MURATEC MW 120G double-spindle frontal cnc lathe is a fast numerical control lathe equipped with 2 spindles (with AUTOBLOCK 210 self-centering) and 2 separate turrets (with 8 positions each), with automatic portal loading/unloading device (double) and piece overturning system for automatic machining on both sides; machine with long crossbeam option, equipped with palletizer for piece loading and conveyor belt on the unloading side. Year of construction 2006 to “CE” standards, FANUC cnc, complete with high pressure coolant pump, tool effort control system (TOOL MONITOR), rear chip conveyor, water jet through the spindle and tool holder series. Main features: Gujdpfxjwqxplo Ah Djk ASA 5″ spindle attachment X-axis stroke 130mm Z-axis stroke 145mm spindle power 11Kw machine weight 4,000 Kg.

Condition: used, Year of construction: 1989, control / centre distance // mm greates pass round over bed / mm Control: TRAUB System TX-8 Spindle clearance (max. bars ®) mm 42 Chuck © mm 200 Turning diameter mm 180 Turning length mm 450 max. circulation ® mm 450 Rotation ® via sorting device mm 350 Rotation ® crosswise tailstock mm 180 Rotation ® over steady rest body mm 240 Longitudinal slide travel mm 490 Slide path flat mm 160 Gjdpeud Inmsfx Ah Dsuk Spindle head DEN 55.026 = 26 - Spindle ® in front bearing mm 85 Power: 41 kW

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 42842, This machine was taken in payment by us from: Herbert Hänchen GmbH 73760 Ostfildern Mrs. Jana Schneider Phone +49 711 44139-152 rebuilt by the company Grünewald Condition: Functional Gjdpfjqy Efzox Ah Djuk

Condition: used, functionality: fully functional, Traub automatic lathe Gujdpfx Aewcqv Ioh Dsk

Condition: good (used), Parts shown by hand not come. Technical data shown on picture. Tools in wooden box will come with machine. Gusdjwb Em Sepfx Ah Djk

Condition: new, Year of construction: 2025, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder - Büchele SFB-100 high-pressure unit Maximum machining diameter: 12 / 20 / 32 mm Maximum machining length: 160 / 210 mm Axes: 7 + Y1 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for the machine supply and control at 200 V / 50 Hz, and chip conveyor designed for Nexturn machines with machine tank. Modular system, all driven tools by WTO, Made in Germany. Including long part extraction unit. Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and sub-spindle Main and sub-spindle collet type: standard Synchronously driven guide bush unit Guide bush type: standard Standard equipment tool holders Linear slides 5-position tool holder for 16x16mm shank tools 4 cross drilling units ER16 Drilling fixture for front / rear face machining, with 5 ER16 drilling spindles Sub-spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining on 2 fixed and 2 driven stations Pneumatic workpiece ejector Workpiece ejection monitor Blow-out device for sub-spindle Workpiece receiver Workpiece conveyor for part removal Separate coolant tank with level and flow monitoring Machine prepared for high-pressure coolant systems (electrical and mechanical adaptation up to 100 bar) Coolant through sub-spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard specification: 8 MB program storage Metric input Direct input of drawing dimensions 200 tool wear offsets Operating hours display Part counter Godpfx Aevyzp Ijh Douk Network connectivity Background machining Automatic power-off function Program execution controllable via handwheel High-speed skip function for probe use Spindle speed monitoring (G25 - G26) Thread turning with variable pitch (G34) Cylindrical thread cutting (G35 - G36) Tool radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and sub-spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation / phase control of main and sub-spindle (M56 - M57) 4 additional programmable M-codes

Condition: used, TECHNICAL DETAILS MAIN SPINDLE - Spindle power : 11.7 [kW] - Spindle speeds : 6000 [rpm] - Spindle boring : 25.4 [mm] - C axis indexing precision : 0.001 [°] - Part-holder headstock stroke : 400 [mm] - Tool-holders slide strokes X x Z : 385 x 220 [mm] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 2020 [mm] - Machine height : 2230 [mm] EQUIPMENT Guodpfx Asuhadush Dek - CNC : NUM 1060 - Coolant tank

Condition: new, Year of construction: 2025, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder - Büchele SFB-100 high-pressure coolant unit Maximum machining diameter: 12 / 20 / 32 mm Maximum machining length: 160 / 210 mm Axes: 7 + Y1 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for power supply to the machine and control with 200 V / 50 Hz, and chip conveyor designed for Nexturn machines with machine tank Modular system, all driven tools are manufactured by WTO, Made in Germany includes long parts discharge unit Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and sub spindle Main and sub spindle collet type standard Synchronously driven guide bushing unit Guide bushing type: standard Standard equipment tool holder Linear slides 5-position tool holder for shank 16x16mm 4 cross drilling units ER16 Drilling unit for front/rear face machining with 5 drilling spindles ER16 Sub spindle for backworking Backworking with 4 machining stations ER16 Drive unit for backworking tools: 2 fixed stations and 2 driven stations Pneumatic workpiece ejection device Part ejection control Blow-off unit for sub spindle Workpiece receiver Workpiece conveyor for discharging workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through sub spindle Automatic central lubrication with level monitoring Gujdsvyzqfspfx Ah Dsk Toolbox with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control features included in standard scope: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear offsets Operating hours display Workpiece counter Network connectivity Background machining Automatic power-off function Program execution via handwheel High-speed skip function for use of probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Helical thread cutting (G35 - G36) Cutter radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate transformation (G68.1 - G69.1) Multiple repeat cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and sub spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and sub spindle (M56 - M57) 4 additional free M codes