Used cNC lathes up to 199mm turning diameter for sale (288)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 66595, Typ: CNC soustruh Výrobce: Spinner Pedpfxjwab I Aj Ag Tjgi Model: SB-CNC Rok výroby: 1995 Ovládání: Siemens 840D Maximální otáčky vřetena: 8 000 ot./min Kapacita tyče: 42 mm Pojezd osy X: 250 mm Pojezd osy Z: 285 mm Počet nástrojových stanic: 12 (VDI 16) Pohon nástrojů: ne Hmotnost stroje: cca 3 000 kg

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Pgedpewym Nfefx Ag Tsi Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2010, operating hours: 1,900 h, machine/vehicle number: IntNr231495, Used Haas ST-20SS (Super Speed) CNC turning centre, year 2010, including LNS Super Hydrobar 6.50 HS 4.6, year 2011. Technical Specifications: - 15-inch colour LCD monitor, user-friendly HAAS control - Maximum turning diameter: up to 254 mm - Maximum turning length: 533 mm Spindle: - Main spindle bearing defective! - Speed: max. 5,000 rpm - Drive power: 22.4 kW (30 hp) High-Performance Vector Drive - Spindle nose: A2-6 - Spindle bore: 88.9 mm Turret: - 24-station hybrid turret Pgedpoytrwgjfx Ag Tei Rapid traverse: - 24.0 m/min (X-axis) - 30.5 m/min (Z-axis) Equipment: - Automatic tool presetting system (Auto Probe Arm) - Unit for driven tools - LNS Super Hydrobar 6.50 HS 4.6 (year 2011), suitable for bar diameters from approx. 5 mm to 50 mm (expandable to 65/68 mm within the HS series, depending on the model) The machine can be inspected under power by appointment. Technical data and specifications may be subject to change and error. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 2,200 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 2000. This Other URSUS TC features a maximum turning diameter over bed of 600 mm and a longitudinal travel of 2000 mm. It also includes a controlled transverse travel of 300 mm and a maximum spindle speed of 2200 rpm. If you are looking to get high-quality turning capabilities, consider the Other URSUS TC machine we have for sale. Contact us for further details. • Centre height over bed: 300 mm • Maximum turning diameter over bed: 600 mm Technical Specification Psdpfjyud D Iox Ag Tsgi Counter Spindle No Driven Tools No

Condition: used, turning length / mm control / centre height / mm Make / Model: MAZAK QUICK TURN 8NSP Technical Specifications: Maximum turning diameter: 160 mm Pgjdpfx Agsyukikj Tei Maximum swing over bed: 300 mm Spindle speed: up to 4,500 rpm Weight: 2700kg Equipment: Various accessories

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 26,100 W, total height: 2,083 mm, total width: 1,971 mm, overall weight: 8,800 kg, controller manufacturer: FANUC, controller model: 18-TA, product length (max.): 4,191 mm, number of axes: 2, Horizontal CNC lathe with tailstock manufactured in 2004. This Takisawa TS-35 features a maximum turning diameter of approximately 400 mm and a turning length of 1000 mm. It is equipped with a powerful 26.1 kW main spindle motor and a chuck size of 304 mm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-35 machine we have for sale. Contact us for further details. • Distance between centers: 1000 mm • Swing over bed: approx. 400 mm • Maximum turning diameter: approx. 350–400 mm • Maximum turning length: 1000 mm • Spindle: Pgjdpsyt Rtgefx Ag Tji • Chuck size: 304 mm • Spindle bore / bar capacity: approx. 104 mm • Turret/tooling: • Number of stations: 10 • Boring bar capacity: approx. 40–50 mm • Tailstock: Manual quill for long shaft support Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), Year of construction: 2008, Maximum turning diameter: 50 mm Maximum turning length: 60 mm Spindle nose I: ASA Flat Spindle nose II: ASA Flange Psdpfxeyxmlde Ag Tsgi Spindle speed (rpm): 4500 (8000) Motor power: 3.7 kW

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm Pgedpeytt A Refx Ag Tei • C-axis indexing accuracy: 0.001° • Sub-spindle (if equipped) • Speed: 4,500 rpm • Nose: ASA A2-5 • Bore: 62 mm • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,417 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 203 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 585 mm, spindle motor power: 15,000 W, total height: 1,852 mm, total width: 1,935 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: 0i-TF, product length (max.): 2,716 mm, number of axes: 4, This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details. Standard Equipment • Turret: 12-station drum turret • CNC control, 4 axes (including C-axis), Fanuc 0i-TF • Anti-collision protection system (mechanical “Airbag”) • Y-axis Pjdpoytqpnefx Ag Tjgi • 15″ LCD monitor with USB port • Live tooling – 12 positions • Automatic central lubrication system • Machine working area lighting • Coolant pump – 180 W • Initial coolant filling (Blaser coolant)Options included • Transformer • Luck-Beil II (NT Manual Guide – graphical interface for control) • Increased spindle bore to 71 mm (4500 rpm; A2-6) • Upgraded main spindle motor Fanuc 15 / 11 kW (258 Nm) • High-pressure coolant system with Brinkmann pump • Shut-off valve for high-pressure coolant system • Low coolant level sensor • Part ejector cylinder from sub-spindle (cylinder stroke 100 mm) • Signal tower for machine status (3 colors) • Operator shelf under control panel • Type A parts catcher (Ø71 mm / L150 mm / 3 kg) • Preparation for LNS bar feeder • Air blow through main and sub spindle • Manual tool probe (Renishaw, one arm for both spindles) • Spindle cooling system for main and sub spindle • Preparation for oil mist extraction system Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A 3 turrets Parts conveyor Pgodpfoydmbuox Ag Tei Magazine Further details on request

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Pgsdpfx Ageyvtugs Tji

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning length: 700 mm, turning diameter: 500 mm, Machine is located in our Plovdiv Bulgaria warehouse Pgsdsyrd Nxopfx Ag Tei Machine has bar feeder. Machine is VDI turret 700 mm machining length IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: used, Year of construction: 2008, MURATEC - MW 120 - 2008 - 2-4 pcs - disconnected but can be reconnected - complete machines with all periferies - can be tested upon agreement Pgodoyt Rr Aepfx Ag Tei

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm Podeyr R A Eopfx Ag Tjgi • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 215 mm, travel distance Z-axis: 520 mm, quill diameter: 72 mm, quill stroke: 110 mm, overall weight: 3,070 kg, swing diameter over bed slide: 500 mm, swing diameter over top slide: 220 mm, Equipment: chip conveyor, CNC lathe OPTIturn S600 slant bed with Sinumerik 828 D control system, including the following options: - Safety Integrate - Remnant material detection and processing - Shopturn step programming - Network drive management - 3-D simulation - Real-time drawing/track back - 15.6-inch color display, multitouch Pgsdpfow U Rv Dox Ag Tji - Spindle mount DIN ISO 702-1 No. 6; chuck through-hole Ø 65mm; hydraulically operated chuck Ø 215mm; tailstock mount MK4 - Hydraulic tool turret LS200 with 12 tool stations, max. holder height 25mm - 30° slant bed for especially large machining diameters - Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity - Handwheels for manual movement - Heat exchanger on control cabinet - Includes machine feet - Hydraulic unit 1500W, 60 liters - Foot pedal for hydraulic chuck clamping/release - Foot pedal for tailstock with hydraulic quill - Halogen work lamp - Siemens servo motors on all axes - Chip conveyor - Chip trolley - Device for manual tool measurement - Portable electronic handwheel - Renishaw tool probe - Includes machine feet - Electrical connection, 31 KVA three-phase 400V ~ 50 Hz - Control upgrade PPU290 SW8 - Sauter turret VDI30-12T - Automatic tailstock movement - Through-spindle coolant 20 bar - Oil skimmer - Coolant pump 5 bar - Automatic tool measurement - Automatic parts catcher - Axial driven tool holder - Radial driven tool holder

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, overall weight: 5,700 kg, spindle nose: JIS A2-5, number of driven tool stations in tool turret 1: 10, number of driven tool stations in tool turret 2: 10, CNC Lathe DMG MORI NRX2000MC Podpfx Agsytrnle Tegi TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: MITSUBISHI M730UM Max. turning diameter: 150 [mm] Stroke X axis: 100 [mm] Stroke Z axis: 220 [mm] Rapid traverse rate X1 axis: 30000 [mm/min] Rapid traverse rate X2 axis: 30000 [mm/min] Rapid traverse rate Z1 axis: 30000 [mm/min] Rapid traverse rate Z2 axis: 30000 [mm/min] Spindle nose: JIS A2-5 Max. machining length spindle 1: 100 [mm] Max. machining length spindle 2: 100 [mm] Max. spindle speed - Spindle 1: 6000 [rpm] Max. spindle speed - Spindle 2: 6000 [rpm] Live tools power - Turret 1: 1.5 [kW] Live tools power - Turret 2: 1.2 [kW] Number of tool stations - Turret 1: 10 Max. speed driven tools - Turret 1: 10000 [rpm] Number of tool stations - Turret 2: 10 Max. speed driven tools - Turret 2: 10000 [rpm] Total power required: 38 [kVA] Supply voltage: 400 [V] Weight: 5700 [Kg] INCLUDED EQUIPMENT: x1 gantry loader x2 workstockers (left + right) for raw materials and finished workpieces x1 RENISHAW workpiece touch probe, type RLP40 x17 static tool holders x4 axial driven tool holders x2 KITAGAWA collet chucks, type KLAMP DKF65 x2 three-jaw chucks x1 status indicator lamp x1 remote electronic handwheel (Jogwheel) x1 oil mist extraction unit x1 chip conveyor x1 high-pressure coolant unit, 35 [bar] x1 SIEBEC cutting fluid filtration unit type MP52D-AP18 More information upon request.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 x 750 Precision Lathe (2007) Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2011 Availability: from April-May 2026 Condition: very good, used Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool shank cross-section: 20 x 20 mm Spindle nose according to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40.5 mm Pjdpeyw Tkdjfx Ag Tsgi Main spindle internal taper: 5 mm Drive power 60%/100% duty cycle: 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Cross feed force: 3,000 N Feed range: 0.001 - 10 mm/rev Rapid traverse (longitudinal/cross): 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 TPI Module threads: 0.125 - 28 mm DP threads: 224 - 1 DP Max. number of thread pitches: 99 Quill diameter: 50 mm Quill stroke: 130 mm Quill internal taper: MT3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Weight: 1,300 kg Scope of delivery: - Collet chuck system - Multifix quick-change tool post - Machine lamp - Coolant system - Machine feet - Original documentation

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 320 mm, turning length: 650 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, WEILER PRAKTIKANT 160B Weiler Praktikant 160B lathe in excellent condition, with many accessories. Year of manufacture: 1993. Technical specifications: * Machine year of manufacture: 1993, Machine number: 160 3471 * Centre height: 160 mm * Distance between centres: 650 mm * Speed: 16 steps, 48 / 2500 rpm * Spindle bore: 40 mm * Spindle head: DIN 55027 5 * Tailstock taper: MK 3 Pgsdpfxeytd Uke Ag Tji * Automatic feed from 0.02 to 0.63 mm/rev * Capable of metric, imperial, module, and diametral pitch threads * Metric thread pitch from 0.25 to 8 mm * Switchable spindle brake * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * Several collets * 3-jaw steel chuck Rhom with 2 sets of jaws * 4-jaw chuck * Multifix A with 4 holders * Bed stop * Fixed centre * Change gears * Machine feet * Machine manual in German.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. • Chuck size: 8" (210 mm) • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher • USB port • 6 live tools (3 axial and 4 radial) Psdpfjx D Nzpex Ag Tjgi • BOT holder and VDI holder

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm ; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: CM5; 500 kgf thrust; rotating tip • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetting: Manual • Programming: Conversational IGF Pjdpoyq Ngmofx Ag Tsgi

Condition: ready for operation (used), Year of construction: 1983, overall weight: 4,400 kg, number of axes: 3, This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information. • Turning diameter over bed: 630 mm • Turning diameter over support: 340 mm • Turning length: 2000 mm • Centre height: 290 mm • Clearance: 70 mm • Spindle speed range: 22.5–1120 rpm (18 steps) Pgedpfxex Imrcs Ag Tji • Feed, longitudinal: 0.036–2.5 mm/rev • Feed, transverse: 0.018–1.25 mm/rev • Total power requirement: 15.0 kW • Transport dimensions (LxWxH): 5.0 x 1.35 x 1.5 m • Tailstock taper: MK5 Additional equipment • 400 mm tapered bar chuck • 1 face plate, D=630 mm • 2 face plates with cross slots • 2 large steady rests (340 mm capacity) • 2 steady rests (center type) • 1 travelling steady rest • Heidenhain position indicator (DRO) • Various tool holders • Tool cabinet with tool holders • Steady rest box

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation bar loader Machine Benefits Technical Machine Benefits Pedpfx Agox D R Hgj Togi • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 23,000 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 560 mm, number of axes: 2, This Hyundai Wia L230LA was manufactured in 2018. It features X-axis travel of 220 mm, Z-axis travel of 560 mm, a swing over the bed of 600 mm, and a swing over the carriage of 355 mm. Spindle speed reaches up to 4000 RPM. Two units available. Contact us for more information. • Swing over bed: 600 mm • Swing over carriage: 355 mm • Availability: 2 machines Additional equipment Pgodpoyf Hqrjfx Ag Tji • Chip conveyor: not included • Other accessories: not specified

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm Pjdeyaimfepfx Ag Tegi • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 Pgjdpeyalpcofx Ag Tei • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l