Used center lathes 300-399mm turning diameter over bed for sale (190)

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet Bodpfx Ajvrcqdebtedg >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual Bdedpfx Aowrm Dtsbtog >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Bdodpfx Abewthbijtog Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, Bsdpfsthd Shex Abtodg We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Bedpfsu H U S Hox Abtsdg Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Misc. accessories Bsdpfx Aorx Rwnjbtodg MARCELS MASCHINEN CH

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 Bdsdexaamuepfx Abtog feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

Condition: used, Year of construction: 1960, centre distance 1200 mm 550 Bdedpex U A Igefx Abtsg weight of the machine ca. 2,5 t

Condition: good (used), Center distance: 800mm Spindle clearance: 38mm Bdsdpfeukrtnex Abteg Center height: 165mm Turning diameter over bed: 330mm Turning diameter over slide: 170mm Speed: 24-2800 Dimensions: 1600mm x 600mm x 1250mm Weight: 850 kg

Condition: good (used), Lathe WAFUM Type TUD 40 Centre distance: 1500 mm Swing over bed: Ø 440 mm Centre height over bed: 220 mm Centre height over carriage: Ø 125 mm Spindle bore: Ø 56 mm Spindle speed: 18 - 1800 rpm, 36 steps Tailstock taper: MK 5 Drive power: 4 and 6.7 kW - Spindle speed via 2 motor speeds and 18 gearbox stages - Guide ruler for turning slender cones with automatic longitudinal feed Space requirement (L x W x H): 3100 x 1200 x 1450 mm Weight: 3000 kg Good condition Bdsdpfx Asyx Uv Dsbtog

Condition: ready for operation (used), Colchester Master 3250 Lead-/Feed-Screw Lathe | Lathe | Turning Machine Swing over bed: 350 mm Swing over cross slide: approx. 196 mm Center height: 170 mm Spindle bore: 42 mm Spindle speed: approx. 20–3250 rpm Distance between centers: 1250 mm Main motor: 7.5 kW (10 HP) Thread cutting: Bodpfx Aboy Nknkstjdg - Metric pitch 0.2 – 14 mm (51) - Inch thread T.P.I. 2–56 (56) - Module threads, pitch 0.2 – 3.5 (20) - Diametral pitch (D.P.) 8–56 (20) You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other listings. Brand names and trademarks mentioned are property of their respective owners and are used for identification and description purposes only. Deviations in technical data and errors in article description may occur and are subject to change.

Condition: ready for operation (used), L & Z Lathe / WEILER CONDOR VS 2 with new 3-axis digital readout from training workshop Bdedpoy Ral Isfx Abtsg - 3-axis digital readout "NEW" - Center height: 165 mm - Swing diameter over bed: 330 mm - Center distance: 800 mm - Speed range: 28 - 2800 rpm - Automatic longitudinal / cross feeds - Spindle bore - Tailstock with center - Collets / quick-clamping device incl. 25 collets - 3-jaw chuck Röhm 200 mm with reversible jaws - Multifix / new with insert - Work light - Emergency stop - Bed stop - Machine feet - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: ready for operation (used), L&Z Lathe MONDIALE LALLIC 16 N / incl. Acurite / 3-axis digital readout - Centre height: 165 mm - Swing over bed: 325 mm - Distance between centres: 1000 mm - Spindle bore approx. 42 mm - 3-axis digital display ACU-RITE - Speed range: 45–2000 rpm - Automatic longitudinal/cross feeds Bdsdpjy N Ecisfx Abteg - Tailstock Morse Taper 4 - Thread cutting: metric / imperial etc. - Quick-change toolholder - Three-jaw chuck - Electrical chuck guard - Chip backsplash Dimensions: L×W×H 2.1×1.2×1.6 m / Weight: 1700 kg Errors and omissions excepted.

Condition: good (used), Machine number: 8025 Type / Model: DZFG 200 x 500 Control: conventional Bjdpfoykt Dvox Abtsdg Centre distance: 500 mm Spindle bore: 32 mm Centre height: 160 mm Swing diameter over bed: over cross slide: 315 mm 200 mm Speed range: 56 to 2,800 rpm Feed long: face: 0.02 to 0.8 mm/rev 0.01 to 0.4 mm/rev Connection: 5.5 kW Accessories / Equipment: Condition: good Weight: 1.9 t Dimensions: 2,100 x 1,100 x 1,400 mm

Condition: used, Lathe Manufacturer: WMW/BWF Year of manufacture: 1959 Machine number: 8932-05 Type / Model: DLZ 400/1500 Control: Conventional Centre distance: 1,500 mm Spindle bore: 40 mm Centre height: 200 mm Turning diameter over bed: 400 mm Bjdpsyt Nn Aofx Abtsdg over cross slide: 250 mm Drive power: 5 kW Accessories/Equipment: Standard tool holder; 3-jaw chuck Condition: Good Weight: 3 t Dimensions: 3,100 x 1,000 x 1,500 mm

Condition: ready for operation (used), L&Z Lathe WEILER LZ 330 incl. new 3-axis digital readout (from educational facility) - "NEW" 3-axis digital readout - Center height 165 mm - Swing over bed 330 mm - Turning length 800 mm - Spindle speed range (gearbox) 25–2800 rpm - Automatic longitudinal/cross feeds - New Multifix toolpost with holders - Three-jaw chuck - Collet system with 20 collets - Original copy attachment - Various accessories Bdsdjy Id Uhspfx Abtjg - Documentation Dimensions (LxWxH): 1.8x0.7x1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1970, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 52 mm, turning diameter: 360 mm, center height: 180 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 750 mm, total height: 1,400 mm, spindle speed (max.): 1,750 rpm, spindle speed (min.): 60 rpm, overall weight: 1,800 kg, Conventional lathe, center high 180 mm, between centers 1000 mm, bore Ø 52 mm, 12 speed 60 - 1750 rpm, motor 4 kw, camlock 5'', ; equipement: coolant device, 3-jaws chuck Ø 200 mm, tool post MULTIFIX with 7 toolholders, steady rest, lamp, dimensions 230x115x165 cm, weight ca. 1750 kgs Bdodsx Dl Nvopfx Abtog

Condition: ready for operation (used), Year of construction: 1997, Lead and feed screw lathe / WEILER CONDOR B incl. 3-axis digital readout / Heidenhain - Machine from educational facility - Center height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 185 mm - Turning length: approx. 800 mm - Spindle speeds: 22 - 2800 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric, etc. - Bar capacity: 40 mm - Tailstock / quill taper: MT 3 - Electrical chuck guard - Multifix tool post with holders - 3-jaw chuck - Forkardt - Machine lamp - Chip guard at rear - Bed stop Bodpfx Abjy A Ey Uotodg - Machine feet - Documentation Dimensions (LxWxH): 1.8 x 0.8 x 1.6 meters / Weight: 1100 kg Subject to errors and input mistakes.

Condition: excellent (used), Year of construction: 2012, Colchester Student 2500 Gap Bed Centre Lathe (2012) Ex Research Machine Super Condition Swing over Bed 330mm Swing in Gap 480m Swing Over Cross Slide 210mm Distacne Between Centres 635mm Spindle Bore 40mm Spindle Nose D1-4 Spindle Speeds 40 – 2500rpm Spindle Power 2.2kW Supplied with: 3 Jaw Chuck with Forwards and Reverse Jaws Bodpfx Aboy U Rtwstsdg Tool Holders as Picures QCTP Coolant Tool Box 5C Collet Chuck Chuck Keys 3 Phase 415V Electics For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79230 Machine Serial Number: 308029 Cost: £7,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, spindle bore: 90 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 2,000 mm, turning length: 3,500 mm, rotational speed (max.): 250 rpm, TECHNICAL DETAILS Swing diameter: 2,000 mm Turning length: 3,500 mm Swing diameter over cross slide: 1,500 mm Faceplate diameter: 1,500 mm Working area Center height: 1,050 mm Working area Distance between centers: 3,500 mm (4,350 mm with extension) Spindle bore: 90 mm Bdjdpfoyrdqpjx Abtjg Speed range: 0.6 – 250 rpm Bed extension: 700 mm Roller steady rest: 150 – 1,400 mm MACHINE DETAILS Total power requirement: 28 kW Dimensions & Weight Space requirement: approx. 10 x 3 x 3 m Machine weight: approx. 22 t EQUIPMENT Tailstock Steady rest

Condition: ready for operation (used), spindle bore: 56 mm, turning diameter: 360 mm, center height: 180 mm, WEILER Commodor B incl. 3-axis digital display Heidenhain -GS identification -3-axis digital readout / Heidenhain -Year of manufacture: 1991 -Center height: 180 mm -Swing diameter over bed: 330 mm -Distance between centers: 1000 mm -Spindle bore: 56 mm -Spindle speeds: 25-2000 rpm -Automatic longitudinal / cross feeds -Thread cutting / Metric / Inch / Module etc. -Multifix tool post with inserts -Chuck guard -2x Emergency stop -3-jaw chuck -Chip guard/rear wall -Very well maintained condition -Machine feet -Documentation Dimensions: LxWxH 2.3x1.2x1.6 meters / Weight 1600 kg Errors / omissions excepted. Bedpfey Ak S Aex Abtjdg

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Bdodpfexyvbnox Abtsg Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant! Technical data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working Area Travel distance in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1,280 x 730 x 1,480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest demands: with stepless speed control, constant cutting speed, and a robust 7.5 kW drive power (40% duty cycle). The compact machine with outstanding performance is ideal wherever maximum precision in limited space is required, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, manufactured in 2006. This lathe is in excellent original condition. It was only used occasionally in special production. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. You are welcome to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You will find further lathes from renowned manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with EMCO digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Inner taper: MT 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the Machine: Bdsdjxyvbbopfx Abtjg The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and a robust 7.5 kW drive (40% duty cycle). This compact powerhouse excels wherever maximum precision is required in limited space, such as in optical, electrical, and automotive workshops, laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with EMCO digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features an extremely user-friendly control. The ways are regularly lubricated by the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power on-site. You will find more lathes from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Bedpfx Abexyvaqjtsdg Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: new, Bernardo Standard 165 D Lead and Feed Lathe Technical Specifications Distance between centers: 1000 mm Distance between centers over bed: 350 mm Bjdpfx Ajd Ri Ezebtodg Distance between centers over cross slide*: 450 mm Distance between centers over compound slide: 190 mm Bed width: 180 mm Spindle bore: 40 mm Spindle mount: DIN 55029, D1-4 Speed range: (8) 70 - 2000 rpm Range of longitudinal feeds: (40) 0.053 - 1.29 mm/rev Range of cross feeds: (40) 0.013 - 0.31 mm/rev Metric threads: (32) 0.4 - 7 mm Inch threads: (36) 4 - 60 TPI Tailstock travel: 110 mm Tailstock mount: MK 3 Motor output power: S1 100% 1.5 kW (400 V) Motor input power: S6 40% 2.2 kW (400 V) Machine dimensions (W x D x H): 1730 x 700 x 1340 mm Weight approx.: 514 kg * Bed length can be extended Scope of delivery • 3-axis digital display i200 with LCD • 3-jaw chuck DK11-160 mm / D4 • Faceplate 200 mm / D4, according to DIN 55029 • Fixed steady rest – bore diam. max. 60 mm • Follow rest – bore diam. max. 60 mm • Clamping plate 250 mm • Four-way tool holder • Shaft locking device • Protective device for tool holder • Slip clutch • Micrometer length stop • Coolant system • Extendable chip tray • Motor with magnetic brake according to CE standard • Foot pedal with braking function according to CE • Splash guard • Threading dial • LED machine light • Reducing sleeve • Change gears • 2 centering points • Base frame • Operating tools