Used Center lathes 300-399mm turning diameter over bed for sale (229)

Condition: good (used), Year of construction: 2021, – Year of manufacture: 2021 – Centre distance: 910 mm – Swing over bed: 300 mm – Swing over gap: 430 mm – Swing over cross slide: 178 mm – Spindle bore: 38 mm – 60/2000 rpm – Longitudinal and cross feed – Digital readout – Multifix with 4 tool holders – Safety guard – Three-jaw chuck – Emergency stop switch – Documentation – 400V Njdpfexhx S Esx Aa Iodc

Condition: used, Year of construction: 1991, Used lathe from Hwacheon Type: HL435 DXX1000G Ndsdowk Iukspfx Aa Ioc Turning diameter: 435 mm Turning length: 1000 mm Digital readout Year of manufacture: 1991

Condition: used, Year of construction: 1989, turning diameter over bed 300 mm turning diameter over slide rest 150 mm turning length 800 mm spindle bore 36 mm turning speed range 42 - 2000 U/min feeds 0,011 - 0,91 mm/U tailstock quill taper MT 3 total power requirement 2,2 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 0,8 x 2,0 m Ndedpfx Ajrdwfzea Ioc Machine had been active in the school centre very little used!

Condition: good (used), Internal Item No.: 25057 Gap Bed Lathe with Lead and Feed Screw From vocational school! Manufacturer: Kirloskar Imatec Model: ID 175N + 3-axis digital readout + Multifix "B" tool post including one tool holder + 3-jaw chuck (Röhm 160) + Chuck guard with switch + Drill chuck Year of manufacture: Not specified Center distance: approx. 1000mm Center height: approx. 175mm Swing over cross slide: approx. 210mm Spindle bore: approx. 40mm Speed range: 35 - 2000 rpm Nodpfx Aaew U Dq Us Iodc Tailstock taper: MT3 Dimensions (LxWxH): 190 x 110 x 175 cm Weight: approx. 500 kg

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Ndedpfsw Uf Hwjx Aa Iec Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: excellent (used), Year of construction: 1979, Manufacturer Weiler type Commador II L+Z Lathe year of construction: 1979 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approx. 1500 kg Technical data: Max. Turning diameter over bed: approx. Ø 380 mm Max. Turning diameter over support: approx. Ø 190 mm Max. turning length: approx. 1000 mm Bar passage: approx. Ø 56 mm Spindle: Nodjlp Ircjpfx Aa Iodc Speed range: approx. 25 - 2000 rpm spindle nose: A 2 - 6 Drive power: approx. 4,0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.026 - 1.253 mm/rev. Suitable for threads: - metric 0.35 - 12 mm - inch 44 - 2 Gg/" - diametrical - pitch thread 88 - 5 Dp - Module 0,2 - 4 Tailstock: MK 4 Without tool holder

Condition: new, turning diameter over bed 400 mm Ndodpfx Aoupxrhja Ijc turning diameter over slide rest 264 mm turning length 1000 mm turning diameter in the gap 550 mm turning speeds 44 - 2000 U/min centre height 200 mm spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 1,5 / 2,4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools

Condition: excellent (used), Weiler Ergodor lathe Max. Turning diameter over bed: approx. 320 mm Max. Turning diameter over support: approx. 160 mm Max. Turning length: approx. 470 mm Bar passage: approx. 36 mm Spindle: Ndedpfx Aaeq Ixxys Iec Speed range: approx. 30 - 3550 rpm Spindle nose: A 2 - 5 Drive power: approx. 3.0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Suitable for threads: - metric 0.20 - 12 mm Inch 80 - 2 Gg/ Diametral - Pitch thread 160 - 5.5 Dp Module 0.1 - 4

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Lead and Feed Screw Lathe OPTIturn TH 3309D Year of manufacture: 2024 Condition: as new, workshop-inspected Delivery time: immediately available Technical Data Center height: 165 mm Center distance: 830 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 208 mm Turning length in bed gap: 430 mm Spindle speed ranges: 16 steps, 70–2000 rpm Drive motor: 1.5 kW, 400 V, 50 Hz Spindle mount: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle taper: MT5 Tailstock quill: MT3, quill travel 110 mm Weight: approx. 512 kg Nodpfexgbbaox Aa Isdc Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Threads and Feeds Metric: 0.4–7 mm/rev (26 threads) Imperial: 56–4 TPI (34 threads) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Cross feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed steady rest (Ø 6–50 mm) Travelling steady rest (Ø 8–30 mm) LED machine lamp Reducing sleeve MT5/MT3 Two fixed centre points MT3 Multifix tool holder Change gear set Machine base Initial fill with quality oil Operating tools Subject to errors and input mistakes!

Condition: good (used), GDW LZ 350 incl. 3-axis digital readout - Center height: 175 mm - Swing over bed: 310 mm - Swing over cross slide: 195 mm - Distance between centers: 800 mm - Spindle bore: 43 mm - Speed range: 45-2000 rpm - Automatic longitudinal / cross feeds - Tailstock / quill stroke: 110 mm - Thread cutting: metric / imperial etc. - Multifix tool post with inserts Njdpfxjw Rfzto Aa Ijdc - 3-jaw chuck: 200 mm - Collet chuck system incl. 22 collets - 2x emergency stop - Coolant system - Various change gears, 5 pieces - Drill chuck - Live center - Chip guard at rear - Machine feet - Various tools - Documentation Dimensions: LxWxH: 1.85 x 0.9 x 1.5 meters / Weight: 850 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Njdpfx Aoxldidoa Ijdc Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: used, Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min Ndedpsxab Tpofx Aa Ioc bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college (!!) - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap 320 mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 38 mm tailstock quill taper MT 3 connected load frequency 400 V Nodpfehwavrex Aa Iodc total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools

Condition: good (used), Machine will come without tools. Nodeunyk Nspfx Aa Isdc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Nsdpfxsd Hkucs Aa Isdc Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Year of construction: 1958, condition: used, machine/vehicle number: 58/803 0021, height of centers: ueber Oberbett 300 mm center distance: 1500 mm Njdo Uin Ujpfx Aa Isdc max. circulation-Ø over bed: ueber Oberbett 640 mm spindle boring: 67 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 18 - 900 rpm forwarding feed: laengs/plan 0,063-2/0,032-1 mm/U thread pitch: 0,5 - 14 mm electrical connection: 380 V, ca. 7,5 kW space needed: 1550 x 3100 x 1250 mm weight: ca. 3500 kg

Condition: new, Year of construction: 2025, spindle bore: 40 mm, turning diameter over bed slide: 340 mm, turning length: 760 mm, ERL-V Series Variable Speed Lathe Model: ERL-1330 V Turning Capacity: Ø 340 x 760 mm Spindle Bore: Ø 40 mm Variable Speed Drive Sino Digital Readout Fixed Steady Rest Travelling Steady Rest Multifix Quick-Change Tool Post Coolant System LED Work Light Spindle Brake Chuck Diameter: Ø 178 mm Technical Specifications: - Height of centers: 171 mm - Swing over bed: Ø 342 mm - Swing in gap: Ø 512 mm - Swing over cross slide: Ø 205 mm - Distance between centers: 760 mm - Bed width: 230 mm - Gap width in front of faceplate: 150 mm Headstock and Main Spindle - Spindle nose / internal taper: D1-4, MT No.5 - Spindle centre sleeve: MT No.5 x MT No.3 - Spindle bore: Ø 40 mm - Spindle speeds: Low 100–500 RPM / High 500–3000 RPM, infinitely variable Carriage - Bed length / carriage width: 400 mm / 384 mm - Cross slide travel: 180 mm - Top slide travel: 95 mm Threads and Feeds - Whitworth threads: 45 types / 2–72 TPI - Metric threads: 39 types / 0.2–14 mm - D.P. threads: 21 types / 8–44 - M.P. threads: 18 types / 0.3–3.5 M.P. - Longitudinal feeds: 0.05–1.7 mm/rev - Cross feeds: 0.025–0.85 mm/rev Tailstock - Quill diameter: Ø 50 mm - Quill travel: 112 mm - Centre taper: MT No.3 Ndodpfx Ajxal Hmea Isc Motors - Main spindle: AC 2.2 kW (3 HP) - Inverter/Coolant pump: 1/8 HP Weight (Net / Gross): Approx. 850 / 950 kg Shipping Dimensions: 2000 x 965 x 1900 mm (L x W x H) Crated Dimensions: 2270 x 1000 x 1120 mm (L x W x H) Presented in a format suitable for Machinery classifieds such as Machineseeker and TruckScout24.

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points Ndedpfx Aexaamusa Ioc - chuck key - Movable tailstock - Operation manual

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 220 mm turning length 600 mm turning diameter in the gap 320 mm turning speeds 60 - 1650 U/min centre height 160 mm spindle bore 38 mm tailstock quill taper MT 3 MK connected load frequency 400 V total power requirement 1,1 kW weight of the machine ca. 340 Kg dimensions of the machine ca. 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Ndedpfsupxlnex Aa Isc Forage protection Set of change gears Machine tools

Condition: ready for operation (used), Colchester Triumph 2500 Lathe Swing over bed: 400 mm Swing over cross slide: 246 mm Nodpfxoxfrgdj Aa Iodc Distance between centres: 1270 mm Centre height: 195 mm Max. turning diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2,500 rpm Infinitely variable spindle speed ranges: - low: 14–300 rpm - medium: 36–830 rpm - high: 109–2,500 rpm Overall dimensions: 2,600 mm x 1,300 mm x 1,800 mm (L x W x H) Accessories: 5 Multifix tool holders Steady rest Live and dead centers Drill chuck Jaws Cabinet Coolant pump You are welcome to come and inspect the machine. We are happy to organize affordable shipping for you. You will receive a proper invoice. A net invoice can be issued for international customers with a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may be subject to deviations, and errors in the item description may occur and are reserved.

Year of construction: 1958, condition: used, machine/vehicle number: 800116 1387, height of centers: 180 mm center distance: 1500 mm Nodpfodbp D Uox Aa Iedc max. circulation-Ø over bed: ueber Bett 380 mm spindle boring: 50 mm spindle retainer: Gr. 6 retainer taper tailstock: 5 MK spindle speed: 33,5 - 1500 rpm forwarding feed: laengs/plan 0,004-1,05/0,001-0,35 mm/U thread pitch: 0,25 - 96 mm electrical connection: 380 V, 2,6/3,7 kW space needed: 3470 x 950 x 1240 mm weight: 1670 kg

Condition: repair required (used), turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 25 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56,0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm bed width 310 mm spindle taper DIN 55027 / 6 Ndsdpfx Aaew U U Uqe Ijc feeds - longitudinal 0,022 - 0,8 mm/U feeds - cross 0,011 - 0,4 mm/U thread M 0,3 - 10,0 mm voltage 380 V total power requirement 7,5 kW weight of the machine ca. 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. - machine video - ?v=zCGu4i6V5dM Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front - adjustable bed stop - Coolant system including coolant pan - User manual (PDF)

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 264 mm turning length 1000 mm turning diameter in the gap 550 mm turning speeds 44 - 2000 U/min centre height 200 mm spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 1,5 / 2,4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel Ndedpfx Askxhqvja Ijc 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools

Condition: ready for operation (used), GDW Romi T180 Lead and Feed Screw Lathe Centre height: 180 mm Swing over bed: 325 mm Swing over cross slide: 210 mm Spindle speed: from 50 to 2500 rpm Distance between centres: 1000 mm Spindle bore: 40 mm Tailstock: MT3 Cross feeds from 0.021 to 0.367 mm/rev Number of longitudinal feeds: 20, from 0.043 to 0.744 mm/rev Spindle brake Weight: approx. 1100 kg Space requirement: 2200 mm x 920 mm x 1400 mm (L x W x H) You are welcome to arrange a viewing appointment. We will be happy to organise affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. This requires a valid VAT identification number. Subject to prior sale. Nsdpfx Aaexfhuke Iodc Visit our shop and view our other offers. Specified brand names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are subject to change.

Condition: ready for operation (used), Center height: 165 mm Center width: 1000 mm Swing diameter: over bed 330 mm Spindle bore: 36 mm Spindle mount: size 4 Nodpfx Aasv E D Nbo Iedc Tailstock taper: 5 MK Spindle speeds: 30 - 2500 rpm Feeds: longitudinal/transverse 0.045-0.63/0.023-0.324 mm/rev Thread pitches: 0.6 - 0.56 mm Electrical connection: 380 V, 2.2 kW Space required: 1800 x 900 x 1480 mm Weight: approx. 550 kg