Used center lathes 300-399mm turning diameter over bed for sale (210)

Condition: new, Year of construction: 2025, 0330 mm 210 mm Fpedpfxewp Tfxe Adter 0635 mm 167 mm 40 mm 2,2 kW

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories Fsdpfx Aewpkd Sodtepr collet equipment is included

Condition: used, functionality: fully functional, This Weiler Commodor lathe comes from a technical school and, as such, has low operating hours. Lightly used and not heavily loaded – a tidy, reliable machine with a long service life ahead. Turning length: 1,000 mm Turning diameter over bed: 380 mm Fpodew U Sx Hopfx Adtjr Turning diameter over cross slide: 190 mm Spindle speed range: 25 – 2,000 rpm Number of speed steps: 18 Spindle bore: Ø 56.0 mm Spindle taper: MK DIN 228 / MK 4 Spindle flange: DIN 55027 / size 6 Cross slide travel: 150 mm Bed width: 310 mm Feed rate – longitudinal: 0.022 – 0.8 mm/rev Feed rate – cross: 0.011 – 0.4 mm/rev Voltage: 380 V Total required power: 7.5 kW

Condition: good (used), WEILER COMMODOR L&Z Lathe - Turning diameter: 180 mm - Turning length: 1000 mm - Bar passage: 56 mm - Speed range: 25–2000 rpm - Thread cutting: metric / inch etc. - Automatic longitudinal / face feeds - Tailstock: MK 4 Fpsdsw Nnvwjpfx Adter - 3-jaw chuck: 250 mm - Electric chuck guard - Multifix with insert - Coolant unit - Chip guard rear wall - Machine documentation - Good working condition Dimensions: LxWxH 2.5x1.3x1.7 m / Weight 1500 kg Subject to errors / input mistakes.

Condition: excellent (used), Very good condition + lots of accessories Fsdpfx Adsw R E Tcetjpr

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. Fpodov Hzqxspfx Adtor After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: new, Year of construction: 2024, 0390 mm 240 mm 1000 mm 190 mm Fodpfx Adswp Td Uotepr 54 mm 5,5 kW

Condition: excellent (used), Lead and tension spindle lathe spindle bore 76 mm Center height 220 mm turning length 3.00 m Multifix steel holder with 5 cassettes Coolant device Fpsdpjva Ef Tsfx Adtjr Operating instructions

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, Dear Sir or Madam, For sale is a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent space-to-center height/center distance ratio. The Condor B is sized between the Weiler Praktikant and the Weiler Commodor, making it a genuine all-rounder for any workshop. The machine undergoes a thorough partial overhaul in our shop to ensure it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and all levers are easy to operate. You are welcome to inspect the machine on-site to verify its condition yourself. Availability: on request Center height: 165 mm Center distance: 750 mm Spindle bore: Ø 40 mm Fodpfxow N Np Ss Adtjpr Tailstock taper: MT3 Chuck mounting: short taper DIN 55027 size 5 with bayonet lock Quill travel: 85 mm Spindle speeds: 22–2800 rpm Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (LxHxW) Weight: approx. 1100 kg Further equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more on request... Our service commitment to you: - We are a certified master machine engineering business - All machines are at least workshop-tested - All lubricants and any worn components are replaced prior to sale - On request, we offer complete or partial overhaul of your selected machine - On request, we can repaint your chosen machine in any color you wish - Additional accessories such as tooling can be ordered with the machine upon request - On request, we can also install further accessories such as safety devices - We are happy to handle shipping and/or on-site installation for you

Condition: good (used), Leadscrew & feed rod lathe "Nardini MS 125 E" - Center height over bed: 150 mm - Swing over cross slide: 140 mm - Distance between centers: 500 mm - Spindle speeds: 50–2500 rpm - Spindle bore: 34 mm - Automatic longitudinal / cross feeds - Threading: metric / imperial - Tailstock taper: MK 3 - Multifix toolpost with inserts - Quick-action collet chuck type 173 E incl. 16 collets - Change gears - Tool cabinet incl. various accessories - Machine mounts - Chip guard rear panel - Drill chuck / live center - Work light - Documentation Fsdpfxsw Al Ulj Adtepr Dimensions: LxWxH: 1.6 x 0.7 x 1.6 meters / Weight: 1250 kg Errors and omissions excepted.

Condition: good (used), Center distance: 800mm Spindle clearance: 38mm Center height: 165mm Turning diameter over bed: 330mm Turning diameter over slide: 170mm Fjdpfxsukrtns Adtopr Speed: 24-2800 Dimensions: 1600mm x 600mm x 1250mm Weight: 850 kg

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT Fpedpfx Ajv Iqm Sedter - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: new, Year of construction: 2025, 0330 mm 210 mm 0635 mm 167 mm 40 mm Fjdswp Tbmopfx Adtspr 2,2 kW spindle turning speed - stepless 30-3000 U/min

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, turning length: 650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 20 rpm, overall weight: 800 kg, spindle mount: MK 3, Equipment: rotational speed infinitely variable, Availability: on request Centre height: 160mm Fsdovnrzqopfx Adtepr Centre width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm infinitely variable Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: metric, inch, module, diametric pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Other equipment and accessories: 3-axis digital display, coolant device, chuck guard, jaw chuck and other accessories on request...

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW weight of the machine ca.:650 kg Fodpeufud Dofx Adtjpr dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 3-jaw chuck:160 mm mm :Typ B

Condition: excellent (used), WEILER CONDOR in perfect original condition Fjdpfx Aew Iv U Sodtjpr - Machine from educational institution - Ways/guides as "NEW" - Three-axis digital display "New" - Three-jaw chuck 200 mm "New" - Collet chuck system incl. collet set "NEW" - Multifix quick-change toolpost with inserts "New" - Electric chuck guard - Four-jaw chuck - Live center + drill chuck - Documentation - Original paint - Swing diameter 330 mm - Swing over cross slide 170 mm - Turning length 800 mm - Spindle bore 38 mm - Spindle speeds 24-2800 rpm - Automatic longitudinal / cross feeds - Tailstock MK 3 - Work light - Emergency stop Dimensions: LxWxH 1.9x0.9x1.6 meters / Weight 850 kg Subject to errors / input mistakes

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse Fsdpfov I Ddqex Adtopr 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Fpedpfxev Iqlzj Adtsr Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, turning diameter: 360 mm, spindle speed (max.): 2,300 rpm, power: 4 kW (5.44 HP), Lathe DR 180 S x 750 mm Conventional precision lathe in stepless design Center height 180 mm Center width 750 mm Bed width 250 mm Turning Ø over bed 380 mm Turning Ø over cross slide 245 mm Turning Ø over bed offset 500 mm Main spindle bore 40 mm Main spindle mount CAMLOCK D1-5 Spindle speed range 0-2300 rpm Steps in gearbox 3 pieces Main motor power 4 kW Including 24 V LED machine lamp 3-axis digital readout FAGOR 40i TS with constant cutting speed Quick-change steel holder "Multifix" with 5 inserts Fpodpfotzkfkox Adter 3-jaw chuck AIRLOC Schrepfer machine feet Machine immediately available from stock!

Condition: used, Year of construction: 1985, Weiler Praktikant 140 lathe, built in 1985, with three-jaw chuck and Multifix. The Z-axis guide is slightly worn in the front area. The machine is in good working order. Can be demonstrated live by arrangement. Fpedpfx Adsv N Awfetor

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock Fedpoufud Refx Adtjpr 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: new, Lead & feed screw lathes WEILER COMMODOR 180 GSD -New machine / Exhibition machine / Unused -3-axis digital readout -CE marking -Centre height 180 mm -Distance between centres 1000 mm -Spindle bore 56 mm -Swing over bed 380 mm -Swing over cross slide 215 mm -Speed range 25 - 2000 rpm -Automatic longitudinal / cross feeds -Thread cutting / Metric / Inch / Diametral -Tailstock quill taper MK4 -Tailstock quill stroke 150 mm -Coolant system -Multifix quick-change toolpost with insert -3-jaw chuck 200 mm -Work lamp Fpjdpfxowucv Rs Adtjr -Chip guard rear panel -Documentation Dimensions: LxWxH 2.4 x 1.4 x 1.7 metres / Weight 1700 kg Subject to errors and omissions.

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Fsdpfx Aeq N Ay Ajdtjpr Chuck guard TBC 6-month warranty

Condition: good (used), HBX 360 Distance between centers (mm) 750 Center height (mm) 180 Diameter admitted above the bed (mm) 360 Diameter admitted above the transverse slide (mm) 180 Spindle bore (mm) 37 Maximum stroke of the transverse slide (mm) 180 Width of the transverse slide (mm) 160 Sleeve stroke (mm) 150 Diameter of the tailstock sleeve (mm) 46 Bed width (mm) 335 Small carriage stroke (mm) 110 Small carriage width (mm) 110 Turret type quick change Spindle taper type Morse taper of the tailstock MT5 Spindle speed (rpm) 50 to 3000 Fpsdpfx Aevlwzdjdtor Spindle variator yes (hydraulic) Spindle motor power (Kw) 4.5 Transverse working feed range (m/min) 0.0125 to 5.6 Longitudinal rapid feed range (m/min) 56 to 112 Threading Yes

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Fedpfxjvgmbvo Adtopr Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point