Used machining centers (vertical) X-axis travel 1200-1699mm for sale (192)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,080 h, functionality: fully functional, machine/vehicle number: 2390012, travel distance X-axis: 200 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 425 mm, spindle speed (max.): 17,500 rpm, number of slots in tool magazine: 184, tool length: 300 mm, tool weight: 10,000 g, Equipment: chip conveyor, System consists of the main machine SW BA 442 and 2 robots (M-10iA + M-20iD)! Hfjdpfjvt Tyrox Ah Djr Including equipped tool magazine with extended capacity! TECHNICAL DETAILS Control: Siemens 840D SL Axes: 4 axes Change pallet: 2 swivel axes with 4 mounts each Spindle distance: 200 mm X-axis: 200 mm Y-axis (change position): 500 mm (775 mm) Z-axis: 425 mm Feed drive Design: three-phase synchronous motors Distance measurement (X, Y, Z): direct, absolute Rapid traverse speed X / Y / Z: 55 / 70 / 70 m/min Acceleration X / Y / Z: 8 / 8 / 12 m/s² Forces Peak force (X, Y): 15,000 N Peak force (Z): 12,000 N Nominal force (X, Y): 10,000 N Nominal force (Z): 7,000 N Accuracy Position tolerance (X, Y, Z): Tp = 0.008 mm Workpiece holder Design: Double swivel carrier (Q axis) with two directly driven NC rotary axes (A/U axis) Swivel time (0/180 degrees): 3.5 s Maximum asymmetrical load: 500 Nm Repeatability (at Ø 500 mm): < 0.006 mm Rotary axes (A/U axis) Maximum dimensions of fixture and workpiece: Ø 550 mm x 1,030 mm Maximum fixture and workpiece weight: 450 kg Peak torque: 870 Nm Nominal torque: 440 Nm Maximum speed: 50 rpm Angular acceleration: 3 / 6 / 12 U/s² Parting accuracy: ± 5'' Tangential moment: 3,000 Nm Spindle Arrangement: horizontal, side by side Design: motor spindle, liquid-cooled, AC synchronous technology Main spindle Ø: 40 mm Spindle lubrication: oil minimum quantity lubrication Tool system Interface: HSK-A63 Tool clamp nominal pull-in force: mechanically operated, > 18 kN Wear limit: 16 kN Setting dimension: 10.5 ± 0.1 mm Pneumatics: cleaning air, planar contact control Cooling lubricant: central, emulsion, oil, < 80 bar Minimum quantity cooling lubricant: aerosol, < 5 bar Speed and power Speed range: 1 - 17,500 rpm Ramp-up time: 1.2 s Power: 4 x 32 kW at 4,200 rpm or 40% ED Nominal power: 4 x 25 kW at 4,200 rpm Torque: 4 x 72 Nm at 40% ED Nominal torque: 4 x 55 Nm Tool magazine Change system: pick-up Tool management: fixed location coded Capacity: 182 tools (4 x 46) Tool diameter with/without free neighbor: 150 / 80 mm Tool length: 300 mm Tool weight: 10 kg Maximum total tool load: 720 kg Average chip-to-chip time (n < 10,000 min⁻¹): 3.0 s MACHINE DETAILS Installation space (W x H x D): 4.38 x 5.00 x 7.00 m Machine weight in operation: 22,000 kg Transport weight: 14,500 kg Measuring surface sound pressure level (DIN EN 12417:2007): ≤ 75 dB(A) Switch-on time: 34,823 h Spindle time: 14,080 h Electrical connection data Connection voltage: 3 x 400 V, 50 Hz (earthed) Connection type: TN-S or TN-C network Total connected load: 123 kVA Rated load factor (RDF): 0.6 Back-up fuse: 160 A gG (5 s) Coolant supply Chip conveyor: Knoll make Coolant supply/filter system: Knoll make, type 800K-1, year of manufacture 2016

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 35,600 m/min, rapid traverse Y-axis: 35,600 m/min, rapid traverse Z-axis: 35,600 m/min, workpiece diameter (max.): 127 mm, number of slots in tool magazine: 31, tool length: 330 mm, Haas VF-4SSHE – Vertical Machining Center The Haas VF-4SSHE is a high-performance vertical machining center, manufactured in 2007, equipped with Haas CNC control. Ideal for fast and precise machining, it offers generous work capacity and a compact structure. Main technical features: Hfedpfxswt Rips Ah Djr Axis travel: X = 1,270 mm, Y = 508 mm, Z = 635 mm Spindle: ISO-40, 12,000 rpm, 22.4 kW Spindle – table distance: 107 ÷ 742 mm Rapid traverse: 35,600 mm/min Feed rate during machining: 21,200 mm/min Table: Dimensions: 1,321 x 495 mm Load capacity: 800 kg Tool changer: Tool type: BT-40 Magazine capacity: 24 positions Max tool diameter (adjacent/free): Ø64 / Ø127 mm Max tool length: 330 mm Max tool weight: 5.4 kg Additional equipment: 4th axis – Haas rotary table Ø 310 mm High-pressure coolant pump through the spindle Tank with wash pump Spindle cooler Screw-type chip conveyor Manuals, electrical diagrams, and CE declaration Machine dimensions: L 4,100 mm × W 2,600 mm × H 2,690 mm – Weight: 6,250 kg

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SELCA, controller model: 3045, table width: 600 mm, table length: 2,000 mm, spindle speed (max.): 10,000 rpm, spindle nose: 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Table dimensions: 2000x600 mm Capacity Longitudinal X-travel: 1600 mm Cross Y-travel: 600 mm Vertical Z-travel: 600 mm Hfedpfevzarqox Ah Der Spindle Spindle nose: 40 ISO Spindle speed: 10000 rpm. Tool Stations: 30 no. ACCESSORIES: With double chip auger, remote control, axes lubrication control unit.

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Hfodpsv Ax Uyjfx Ah Djr Axis Z 510 mm Table length 2000 mm Table width 510 mm Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Year of construction: 1992, condition: good (used), Travel X-axis: 1500 mm Hfodpfx Ascph Tmeh Dsr Travel Y-axis: 420 mm travel Z-axis: 400 mm clamping surface: 2 x 700 mm x 420 mm max. table load: 800 kg number of tools: 0 2 x 36 pieces tool holder: SK 40 gr. feed: 25 m/min weight: 9 t area required: 6,50x4,5x3,1 m small speed: 50 rpm big speed: 7500 rpm stepless rapid traverse: 25000 mm/min control: Siemens Sinumerik 820 M GA 3 + 2 x single axis stepper motor control Sama SFI present clamping system: per place 1 NC dividing head with counter bearing, carrier plate, rotary distributor and hydr. clamping and 4-fold dividing head with rotary distributor in special design and sep. NC control Clamping system: 4-fold dividing head consists of 4 -2 jaw chucks, clamping pressure 12bar Make: Hofmann HMR 4/kombi 294/4 Tool breakage control Meutrsuix ATM B310 Renishaw probe system (without probe) Coolant system with sparger, filter system and fine filter

Condition: like new (used), Year of construction: 2024, operating hours: 1,223 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, total height: 3,000 mm, total length: 5,800 mm, total width: 4,300 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 380 V, type of input current: three-phase, power: 39 kW (53.03 HP), power of the milling unit: 39,000 W, space requirement width: 4,300 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, POSmill E 1600 Control: Heidenhein iTNC 640 Travel X: 1600 mm Travel Y: 800 mm Travel Z: 800 mm Table size: 1700 x 800 mm SK 40 tool holder Tool positions: 40 Max. spindle speed: 10,000 Rapid traverse: 32 m/min Weight 13.5 t Operating hours only 1,223h Hfodjvwlp Hopfx Ah Dor Equipment: - Glass scales in all 3 axes - Hexagon 3D infrared touch system - Air through the spindle - IKZ 20 bar with band filter unit - Mobile electronic handwheel - Heidenhain iTNC 640 - Tool changer with 60 positions can be operated from the front The machine is in our production and is still in use. Delivery is possible at short notice by arrangement. Instruction on the machine, transport and commissioning are available for a separate charge. The machine has always been regularly serviced and is in very good, well-maintained condition. Sold without accessories such as clamping devices, chip containers, workbench and tools.

Condition: used, Vertical Machining Center MAZAK VTC-20B – Year of manufacture: 1998 Hfedpewdrftefx Ah Djr • CNC Control: Mazatrol M Plus • Axis Travels: X = 1660 mm, Y = 510 mm, Z = 510 mm • Spindle: • Taper: ISO 40 • Max speed: 7,000 rpm • Power: 7.5 kW • Tool Changer: • 24-position automatic tool changer • Feed Rates: • Rapid traverse on all axes: 30,000 mm/min • Table: • Size: 2000 x 510 mm • Max load: 500 kg • Cooling System: • Standard integrated system • Dimensions & Requirements: • Footprint: approx. 3200 x 2700 x 2800 mm • Weight: approx. 5200 kg • Compressed air: 6 bar • Note: Machine in full working condition, available for inspection on request

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] Hfodpfx Ahjuhb D As Der TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M542-01205121BFC / Q-5145, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 1,500 mm, table length: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 1,270 mm Y-axis travel: 660 mm Z-axis travel: 610 mm Number of controlled axes: 3 Table length: 1,500 mm Table width: 660 mm Load limit: max. 1,350 kg Feeds Rapid traverse X-axis: 30,000 mm/min Hfodovr Avgopfx Ah Dor Rapid traverse Y-axis: 30,000 mm/min Rapid traverse Z-axis: 20,000 mm/min Spindle Mount: 40 ISO/BT/MK Power: 18 kW Speed range: max. 12,000 rpm Coolant through the spindle: 20 bar Tool changer Capacity: 30 tools EQUIPMENT - chip conveyor - cooling system

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 7,000 rpm, Equipment: documentation/manual, Norte VS500 CNC milling machine RPM: 7000 rpm X axis: 1500 mm Y axis: 500 mm Z-axis: 400 mm Bed dimensions: 2100x550 mm Transport dimensions (LxWxH): 470x350x310 cm Mounting: SK40 Weight: 9000 kg Control type: Siemens 840 D Options: With Chip conveyor With tool changer With documentation With various tools Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Norte VS500 CNC milling machine Spindle speed: 7000 rpm X-axis: 1500 mm Y-axis: 500 mm Z-axis: 400 mm Bed dimensions: 2100x550 mm Transport dimensions (LxWxH): 470x350x310 cm Intake shaft: SK40 Weight: 9000 kg Control type: Siemens 840 D Options: With chip conveyor With tool changer With documentation With various tools Hfodpfx Asrfwy Deh Djr Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Norte VS500 CNC Fräsemaschine Speed: 7000 u/min X axis: 1500 mm Y-axis: 500 mm Z-axis: 400 mm Bettabmessungen: 2100x550 mm Transport abmessungen (LxWxH): 470x350x310 cm Take-up shaft: SK40 Weight: 9000 kg Steuertyp: Siemens 840 D Optionen: Mit Späneförderer Mit Werkzeugwechsler Mit documentation Mit verschiedenen Werkzeugen Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Year of construction: 2002, condition: excellent (used), FIDIA K197 CNC Machining Center ​in very good and working condition​.​ Hedpfeppwnqox Ah Dsfr

Condition: like new (used), Year of construction: 2012, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,600 kg, spindle speed (max.): 10,000 rpm, spindle nose: ISO B40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Machine in good condition and maintained by the manufacturer. Available quickly. Equipped with Renishaw, Option: 4th Axis. Digital integration and 4th axis cabling. A second machine is available. Hsdjvxk Tgspfx Ah Dofr Possibility of delivery and installation by us.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, table width: 600 mm, table length: 1,300 mm, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Awea BM1200 Machining Centre Year 2006 Hfsdpfxjwvi Nms Ah Der Travels: 1200x600x600 mm Heidenhain TNC530 CNC SK40 Spindle 8000 rpm with gearbox Integrated 4th axis divider Spirsin Through spindle coolant

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Hjdpfxjqwyzfs Ah Djfr Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Condition: excellent (used), Year of construction: 2011, operating hours: 10,111 h, functionality: fully functional, machine/vehicle number: M12400511, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Heidenhain TNC 620 X-axis: 1,200 mm Y-axis: 600 mm Z-axis: 600 mm 4th axis: included in delivery, dismantled Spindle Taper: SK 40 Max. speed: 12,000 rpm Condition: New spindle (2024), runs very smoothly Tool changer Capacity: 30 tools Hsdpfx Aevrz Smjh Djfr MACHINE DETAILS Control switch-on time: 34,597 h Program run: 11,726 h Spindle run time: 10,111 h

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 37 kVA, torque: 236 Nm, controller manufacturer: Heidenhain iTNC530, controller model: iTNC530, table width: 700 mm, table length: 1,700 mm, table load: 700 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,580 h, spindle motor power: 37 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, Heidenhain iTNC530 3-axis CNC machining center Stroke x 1500 mm Stroke Y 700 mm Stroke Z 610 mm Table dimensions: 1700x700mm Hjdpfx Aevz Tyueh Dofr SK40 tool holder Magazine 48 tools Rapid feed 36m/min Table load: 700 kg Spindle center coolant 20 bar Chip conveyor Crank

Condition: used, Year of construction: 2009, Spinner VC 1460 vertical machining center Year: 2009 Control: Siemens 840D-SL Table length: 1620 mm Table width: 610 mm X: 1460 mm Y: 610 mm Z: 500 mm Spindle taper: ISO40 Speed maximum: 12000 rpm Maximum table load: 800 kg Positions in tool magazine: 32 Hodpfxsx Ew Hro Ah Dsfr Machine weight: 9300 kg. Accessories/options: spindle cooler swarf conveyor tool holders vice documentations coolant tank through spindle coolant