Used machining centers (vertical) X-axis travel 400-599mm for sale (229)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Ndedpfxsz D Taao Ab Ueb Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago. Njdpozzx H Aefx Ab Uodb

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Ndjdpfsz Ahxqex Ab Ueb Control system: Siemens

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, 5-AXIS MATSUURA MAM72-25V VMC Category: Vertical Machining Centers (VMC) Reference No.: 3651 Year of Construction: 2004 Technical Specification: SPINDLE Spindle Taper : BT 40 WORKING CAPACITY Travels (XYZ) : 550 x 410 x 450 mm Ndedox Anlwjpfx Ab Ueb CNC Control : Fanuc 30i

Condition: used, 20-position tool changer Operating hours: approx. 5,886 hours Nodpfozz Hqvex Ab Usdb Footprint: approx. 1700 x 2500 x 2700 mm

Condition: used, Year of construction: 2003, Control system: MSG-501 Machine weight: approx. 6,700 kg Operating hours: 1,507 h Footprint: approx. 2,600 x 200 x 3,400 mm X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table-to-spindle distance: 150–660 mm Table size: 1,100 × 600 mm Table load capacity: 1,000 kg T-slots: 6 × 18 mm Max. spindle speed: 8,000 rpm Optional spindle speed: 15,000 rpm Spindle taper: No. 50 / BT-50 or CAT-50 Spindle bearing inner diameter: 100 mm Rapid traverse X/Y/Z: 42,000 mm/min Cutting feed rate: 1–6,000 mm/min Tool magazine: 30 tools Optional tool magazine: 60 tools Nedpezz Hnujfx Ab Ujdb Max. tool diameter: 120 mm Max. tool diameter without adjacent tool: 240 mm Max. tool length: 350 mm Max. tool weight: 20 kg Spindle motor: 30 / 25 kW Coolant tank: 230 l Electrical connected load: 55.6 kVA Machine height: 2,640 mm Space requirement: 2,728 × 2,620 mm Machine weight: approx. 6,700 kg

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Travel in the Y-axis: 410 mm Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Ndodpfxszpynko Ab Usb Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Documentation included Coolant tank with pumps

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Ndjdszrkycepfx Ab Usb Spindle speed 24,000 rpm NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 21,000 rpm, number of axes: 4, This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Machine Benefits Technical Machine Benefits • 4 cnc axes, with chick horizontal axis dividing head and support bearing. • 21 tools Nodpfx Absx D N Nte Uodb • X =m 500 mm / y = 400 mm / z = 330 mm • Central coolant system with pump and filtration • Oil tank. Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2022, travel -x axis 550 mm travel -y axis 400 mm travel -z axis 400 mm a-axis +/- 120 ° C-axis 360 ° control HEIDENHAIN - TNC 640 number of spindle speeds 24.000 numbers of positions in the tool changer 48 Nsdpfx Asz Dbyhjb Ujdb tool taper HSK-A50 5-axis simultaneous machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S

Condition: used, Year of construction: 2012, 2012 Feeler HV-800 CNC Machining Center with Fanuc 18i-MB Controller Nodpfx Abez Dt N Uj Uedb X/Y/Z: 800/520/505 mm. 4th axis Unit: Peiseler AWUP 160. Table size: 950 x 520 mm. Spindle r.p.m: 15,000 r.p.m. Spind taper: BigPlus 40. Tools magazine: 30 pcs. Machine S/No: HVG044.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DMU 40 evo was manufactured in 2013. It features a maximum spindle speed of 18,000 rpm and a tool magazine capacity of 60 tools. The working area measures 400 x 400 x 375 mm, providing ample space for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DMU 40 evo vertical machining centre we have for sale. Contact us for further details. • Tool taper: HSK 63 • B-Axis: Yes • C-Axis: Yes • Does the machine have CTS? YES • Is a chip conveyor included? YES Ndsdpfxoz Aki So Ab Usb • Tool magazine capacity: 60 tools • Machine works on a knuckle style table • Machine is fully assembled • Machine is currently in storage and cannot be powered on due to its location • Approx. GBP 15,000 recently invested in repairs/service • Two drives have been removed and require refurbishment: Main Heidenhain power drive and X-axis drive • The drives can be reinstalled through the rear electrical cabinet • Reinstallation is relatively straightforward and mainly requires reconnecting the electrical connectors • Machine is currently not operational until the two drives are refurbished and reinstalled

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale! Ndedpfszz S R Ujx Ab Ueb

Condition: used, Year of construction: 1998, functionality: fully functional, VMC 600, used. Nsdpfx Absz Ehnue Ujdb

Condition: like new (used), Year of construction: 2008, operating hours: 4,322 h, functionality: fully functional, FANUC ROBODRILL α-T21iF | 4,322 hours | 24,000 rpm | BT30 FANUC ROBODRILL α-T21iF – High-Speed CNC Machining Center A very well-maintained FANUC ROBODRILL with very low operating hours – approximately 4,322 run hours. The machine was manufactured in Japan in December 2008 and is equipped with a FANUC Series 31i-Model A5 CNC control, a high-speed 24,000 rpm spindle, and fast axis movements of up to 54 m/min. The machine is in very good technical and visual condition and can be inspected and demonstrated under power by prior arrangement. Approximately 50 pcs. of BT30 tool holders of various types and sizes are included in the price. Technical specifications Manufacturer: FANUC Model: ROBODRILL α-T21iF Type: A04B-0099-B112#BM Year of manufacture: 12/2008 Country of origin: Japan CNC control: FANUC Series 31i-Model A5 Run time: approximately 4,322 hours Ndjdpfxoz Diqbe Ab Uob X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Maximum spindle speed: 24,000 rpm Spindle taper: BT30 Automatic tool changer: 21 positions Maximum table load: 300 kg Machine weight: approximately 2,100 kg Power requirement: 10 kVA Power supply: 3-phase, 200/220 V, 50/60 Hz CE marked: Yes Included in the price Approximately 50 pcs. of BT30 tool holders / clamping holders of various types and sizes. IMPORTANT The rotary table / 4th axis shown installed in the machine in the photographs is NOT included in the sale. The machine is available for inspection and demonstration under power by prior appointment.

Condition: used, Year of construction: 2000, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control Heidenhain spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 16 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ndedpfx Abjzy Sibo Uob Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Mazak VARIAXIS500-5XII was manufactured in 2006. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 60 positions. The machine has an impressive X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS500-5XII vertical machining centre we have for sale. Contact us for further details. • Outer length: 500 mm • Outer width: 400 mm • Table load: 300 kg • Max distance between vertical spindle and table: 140 - 600 mm • Number of tool slots: 60 positions Nodpszzwnfsfx Ab Usdb • Chip conveyor: Belt type (with chip pan preparation) • Cooling pressure: 15 kg • Controlled Axes: 5 continuous • Table Dimensions: 500 x 400 mm (x 2 pallets) • Distance Spindle Nose to Horizontal Table: 190 - 650 mm • Spindle Torque: 252 Nm (186 ) • Operating Hours (Power On): 57,979 hrs 58 min 25 sec • Operating Hours (Auto Cut): 31,273 hrs 09 min 14 sec • Operating Hours (Cutting Time): 27,810 hrs 53 min 42 sec • Total Time: 57,979 hrs 58 min 24 sec • Installed Software Options: Auto Pecking Cycle with Load Detection, Synchronized Tapping, EIA Dynamic Compensation 2, Additional M-Code Function (2 M-Codes), G00 Slope Constant, Mazacc-3D High-Speed Software Package, Shape Compensation for Rotary Axes, Tilted Working Plane, Simultaneous 5 Axis Control • Visual Observations: Internal chamber shows normal surface wear and minor coolant staining on enclosure walls, no visible major mechanical damage

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission. Nodpfszzxk Uox Ab Uodb

Condition: excellent (used), Year of construction: 2016, operating hours: 13,100 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 620, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 3-axis machining center Manufacturer: Spinner Type: VC-450 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 13,100 h Serial number: BV XXXX Technical parameters: ----- • Travel ranges X-Y-Z: 450 x 400 x 400 mm • Work table 770 x 410 mm • Max. workpiece weight: 200 kg • Spindle: 15,000 rpm Ndodpezytzfofx Ab Usb • Tool magazine: 24 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, ..paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • Chip conveyor • Machine weight: approx. 3.5 t • Dimensions: 2,400 x 1,700 x 2,500 mm Accessories: ----- • Documentation

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Nodsycplmspfx Ab Uedb

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 183-89, CNC Vertical Machining Center Make: CHIRON Group Model: CHIRON FZ 12 W Year of manufacture: 1999 Machine No.: 183-89 Typical technical specifications of the CHIRON FZ 12 W: Machine type: Control system: usually Siemens 840D or Heidenhain X-axis travel: approx. 550 mm Y-axis travel: approx. 300 mm Z-axis travel: approx. 425 mm Table size: approx. 660 × 350 mm Table load capacity: approx. 500 kg Spindle speed: depending on version, 10,000 – 20,000 rpm Nodsy Sr Ikepfx Ab Uedb Tool holder: SK40 or HSK-A63 Tool changer: 12–24 positions Rapid traverse: up to 60 m/min Main spindle power: approx. 10–15 kW Coolant system Central lubrication Fully enclosed safety cabin Machine weight: approx. 4,500–5,500 kg The machine is part of CHIRON's well-known FZ series and is especially suited for high-speed aluminum and steel machining.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] Nodpfx Asxcbulsb Ujdb MACHINE HOURS - Number of hours under power : 17039 [h] - Number of working hours : 5779 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : Gauche - Tool probe : BLUM Z NANO

Condition: excellent (used), Year of construction: 2015, operating hours: 1,463 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, workpiece weight (max.): 250 kg, total length: 908 mm, total width: 480 mm, overall weight: 3,250 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 30, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 130 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining centre FEHLMANN Picomax 56 TOP TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: HEIDENHAIN TNC 620 Stroke X axis: 500 [mm] Stroke Y axis: 400 [mm] Stroke Z axis: 400 [mm] Feed rate on X, Y and Z axes: 20000 [mm/min] Min. distance spindle nose / table: 120 [mm] Max. distance spindle nose / table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. load on table: 250 [Kg] Spindle type: ISO 30 Max. spindle speed: 12000 [rpm] Tool changer magazin number of stations: 20 Max. tool lenght: 240 [mm] Max. weight of single tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool change time: 3 [sec] Ndjdpfx Abszzmmws Usb Chip to chip time: 8 [sec] Number of cutting hours: 1463 [h] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] INCLUDED EQUIPMENT: HEIDENHAIN linear glass scales on the X, Y, and Z axes x1 FRIBOSA Switzerland precision vise x1 RENISHAW TS 440 part probe x1 RENISHAW TT 140 tool probe x3 ISO30 tool holders x1 FEHLMANN GPRPLUS50 toolsetter x1 coolant tank with pumps x1 spindle chiller Various tightening wrenches Axis locking brackets for machine transport Technical and operating manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall machines, as well as milling, drilling and tapping machines, and CNC grinding machines.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2570709, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 380 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828d, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, table width: 300 mm, table length: 700 mm, table load: 150 kg, rotational speed (max.): 12,000 rpm, overall weight: 2,200 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 16, tool length: 200 mm, tool diameter: 63 mm, tool weight: 3,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, SYIL X7 – CNC Machining Center – Showroom Machine – 4th and 5th Axis Lehmann For sale, a vertical CNC machining center, SYIL X7, a showroom machine in excellent condition. The machine is equipped with a 4th and 5th axis Lehmann, a Swiss manufacturer renowned for its high-precision rotary systems. This configuration enables machining on multiple faces and the production of complex parts with a reduced number of setups. Main equipment: SYIL X7 vertical machining center Siemens SINUMERIK 828D CNC control 4th and 5th axis Lehmann Schneeberger mineral cast frame THK linear guides and ball screws 16-tool automatic tool changer Integrated coolant system Automatic centralized lubrication Fully enclosed cabinet Work area lighting Condition: showroom machine Machine can be viewed powered up and is available for demonstration in our showroom in Le Locle, Switzerland. Selling price with 4th and 5th axis Lehmann: CHF 95,300.– (excluding VAT) Commissioning, training, and after-sales service are available through Swiss Machines Tools, the SYIL distributor in Switzerland. Njdpjz Eh I Uefx Ab Ujdb An excellent opportunity to acquire a compact machining center equipped with a genuine 4th/5th axis Lehmann system at a particularly attractive price. Contact us for the complete technical data sheet, detailed equipment list, available options, and any additional information.

Condition: used, Year of construction: 2022, operating hours: 1,464 h, CNC CONTROL Controller: Fanuc Series 31i-MODEL B5 Plus AXES Number of controlled axes: 3 Number of simultaneous axes: 3 X-axis travel mm: 700 Y-axis travel mm: 400 Z-axis travel mm: 330 Distance spindle nose - table surface mm: 250–580 Feed rates m/min: 30 Rapid traverse m/min: 54 Positioning accuracy mm: < 0,006 Repeatability mm: < 0,004 WORKTABLE Table dimensions mm: 850 x 410 Max. table load kg: 300 Ndsdpfsz Dpk Uox Ab Uob SPINDLE Max. spindle speed rpm: 10.000 Spindle power kW (S1/S6): 14,2 / 4 Spindle taper / interface: BT30 (BIG-PLUS BBT30) TOOL SYSTEM Tool magazine capacity: 21 Max. tool diam. (free adj. places) mm: 80 Max. tool length mm: 250 Max. tool weight kg: 3 Chip-to-chip time s: 1,6 MACHINE RUNNING TIMES Spindle working hours: 1.464