Used machining centers (vertical) X-axis travel 700-799mm for sale (206)

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Table 800 x 400mm, table load 300kgs, Dcsdsyt E Uxepfx Aizsp Spindle speed 12,000rpm, Spindle taper CAT40, 5.5kW Spindle motor, FANUC Oi , 20 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: as good as new (ex-display), Taikan T-V1055S vertical machining center, manufactured in 2026. Dcedpszzw Acofx Aizop

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024) Dedpfx Aieyt I Uhezecp

Condition: good (used), Year of construction: 1997, CNC Vertical Machining Center MORI SEIKI Type: SV500-50 Year 1997 Fanuc MSC-518 Control Table: 1100 x 600 mm Travel: X 800 - Y 510 - Z 510 mm Rapid traverse 32 m/min Spindle mount: BT50 Spindle speeds up to 6000 rpm Complete documentation available. Dsdpfx Aijwa Nvujzecp A clamping magnet is not included in the machine delivery. For further information, see data sheets:

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Dedpfx Aswvf Thsizecp Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,700 mm, total width: 2,250 mm, table width: 500 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 22, product length (max.): 4,500 mm, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Operating Hours: 40,049.8 h • Machine ON hours: 81,189 h • Travel Range X-Axis: 2 x 750 mm (pendulum operation) Dsdpoy Edv Hjfx Aizjcp • Travel Range Y-Axis: 500 mm • Travel Range Z-Axis: 600 mm • Clamping Surface / Table Size: 1350 x 500 mm right and left (2x) • Max. Table Load: 800 kg/m² • Spindle Type: Hollow shaft motor, water-cooled • Spindle Speed Range: 30 - 8,000 rpm (Max 10,000 rpm listed / Nmax 12,000 rpm) • Spindle Power (40% ED): 30.0 kW • Spindle Power (100% ED): 20.0 kW • Spindle Torque (40% ED): 143.2 Nm • Spindle Torque (100% ED): 95.5 Nm • Tool Holder: SK 40 • Tool Changer Capacity: 22 positions (Plate/Disc type) • - Max. Tool Diameter: 85 mm (135 mm with free adjacent spots)- Max. Tool Length: 400 mm- Max. Tool Weight: 8 kg (at L=400mm) / 5.5 kg (at L=200mm)- Rapid Feed X-Axis: 25 m/min- Rapid Feed Y-Axis: 25 m/min- Rapid Feed Z-Axis: 20 m/min- Electrical Connection Voltage: 3x 400V / 230V / N / PE, 50 Hz- Connected Load: 55 kVA- Backup Fuse: max. 100 A- Control Voltage: 24 V • Overall dimensions: 4500 × 2250 × 2700 mm • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller) • A 4th axis is mounted on one clamping side. It is included with the delivery. Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1997, Type / Model: BMC30 Control: Ultimax SSM Operating hours: 5,744 h Travel x-y-z: 760 - 460 - 610 mm Table: 1,130 x 500 mm Table clamping area: 1,000 x 400 mm Speed range: 80 to 8,000 rpm Spindle mount: SK40 Feed rates: 3 to 7,600 mm/min Rapid traverse: 7,600 mm/min Tool changer: 24 stations Power supply: 11 kW Accessories/equipment: Coolant system, external interface Condition: Good Weight: Approx. 4.0 t Dcedpev I Dn Nefx Aizjp Dimensions: 2,200 x 2,300 x 2,800 mm (without display)

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, controller manufacturer: Haas, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 20, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Dcodpfxewx I N Ds Aizep Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Brother C00, _____ Description: Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpm Movement X/Y/Z : 700/400/300 mm Tool holder : BBT 30 Mainspindle: Technology:Directdrive Speed:10.000 rpm Power (max.):26,2 kW Torque (max.):92 Nm Dsdpfjylrn Aex Aizecp Taper:BBT 30 Workingtable: Clampingsurface:800 x 400 mm Tableloading (max.):250 kg In general: Toolmagazine:21 Stations Rapid travers in X/Y/Z:50/50/56 m/min Equipment/Accessory: Chipmanagement:Chip coveyor Coolingmanagement:Minimumlubrication (IKZ), Company Lubrix V5 4.-Axis:Lehmann EA-510 with Counterbearing Workpiececlamping:Hydrulic, 80-210 bar Contactcontrol:Pneumatic Automationinterface I:Automatic Door (electrical) Automationinterface I:Robotinterface Oilmistseparation:Mechanical extraction, company Sara UC1 SD Columnextention:150 mm Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: good (used), functionality: fully functional, Used Haas grinding machine in good condition, fully functional. Dsdpfx Aiozdrmhszscp

Condition: used, Year of construction: 2001, functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table length: 760 mm, table width: 510 mm, table load: 1,000 kg, For sale is a 3-axis CNC milling machine from the Hurco brand and the type VMX 24 Technical data: - Year of manufacture: 2001 - Control: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull bolts, which can be seen in pictures, are not part of the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Dcjdpfxev Tcfko Aizsp Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition. Dsdpfxewvgbys Aizecp

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. Dcedpezylx Aefx Aizep - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, Dodpfxozh I Ags Aizocp spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Dcsdpfx Aexwyuajizep Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: used, Year of construction: 2004, travel distance X-axis: 700 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 24, BRAND FAMUP MODEL MCX 700 CATEGORY Vertical machining centre YEAR OF MANUFACTURE 2004 CONTROL CNC FANUC 21I-MB YEAR 2004 MACHINE WEIGHT (kg) 4,800 NUMBER OF AXES 3 CE DECLARATION SPINDLE Taper size ISO 40 Spindle speed (rpm) 10,000 Spindle motor power (cont./30 min) (kW) 15 / 18.5 WORKING CAPACITY X Axis (mm) 700 Y Axis (mm) 480 Z Axis (mm) 640 TABLE Table size (mm) 900 x 520 Table load capacity (kg) 300 (x2 pallets: 600) TOOL CHANGER Tool magazine capacity 24 Maximum tool diameter (adjacent stations full) (mm) 75 ACCESSORIES Chip conveyor Brand META, model 405 1112 0 Dcjdpfx Aoyzm U Dsizop Indexed rotary table EUROMA (15° degree), model 222

Condition: used, FANUC ROBODRILL ALPHA T21 i FIa is a Vertical machining center delivering precision, high accuracy and reliable performance. Working capacities: table 850 x 400 mm, table load max 300 kg, travels X700 mm, Y400 mm, Z330 mm, total 5 axes, spindle nose-to-table 250–580 mm, tool magazine 21 positions, max tool weight 23 kg. Main technical specs: stepless spindle 100–24,000 t/min, rapid traverse 54 m/min, spindle power 5.5 kW, supply 3x 400 V 50 Hz, total installed power 11 kVA; machine weight ~2200 kg; footprint L2140 x W2000 x H2350 mm. Achieves tight tolerances; suited for automotive, watchmaking, machine tool, aerospace and medical applications. Dcedpoyxntvsfx Aizep

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. FZ15W with 4th and 5th axis Machine dimensions: approx. 4200mm x 2400mm Travel range -X = 730mm -Y = 400mm -Z = 425mm Control: 840D Powerline Dsdpfx Aewpcfusizocp Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tool changer -Tool places: 20 Workpiece changer -Peiseler table with Afrocontroller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI mit SmartNC, table width: 500 mm, table length: 900 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale is a very well-maintained vertical CNC machining center, Quaser MV 154 P, manufactured in 05/2015, with initial commissioning in 09/2016. The machine is in very good technical condition and fully functional. A particular advantage is the recently renewed main spindle, which has only approximately 10 operating hours – the spindle is practically as new. An inspection while the machine is powered on is possible by prior arrangement. TECHNICAL DATA Control: - Heidenhain iTNC 530 HSCI with SmartNC Travel distances: - X-axis: 760 mm - Y-axis: 530 mm - Z-axis: 560 mm - Rapid traverse: 40 m/min Main spindle: - Maximum speed: 12,000 rpm - Maximum power: 25 kW Tool magazine and work table: - Tool magazine: 30 positions - Table size: 900 × 500 mm EQUIPMENT - Chip conveyor - Inclined bed filter system - Zero-point clamping system - 4th axis Rotamatik 120 - Blum measuring probe RENEWED COMPONENTS - Main spindle renewed, operating time only approx. 10 hours - Motor newly re-bearinged - Ball screw of the X-axis renewed - Däublin unit renewed The machine can be inspected and demonstrated at our location in 78132 Hornberg by arrangement. Dodpfxsibat Is Aizscp For questions, further technical information, or to arrange an inspection, Arnd Sauter GmbH is always at your service. Price: 55,000 EUR net, ex works. Subject to prior sale and errors.

Condition: good (used), Year of construction: 1999, Manufacturer: Hitachi Seiki Model: VK45 II Year of manufacture: 1999 Machine type: Vertical CNC machining center Control system: SEICOS Σ10M / A10M X-axis travel: approx. 760 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Table: approx. 1,120 × 485 mm Max. table load: approx. 750 kg Tool changer: 30 positions Dcedpfx Aijzy Rbpezop Spindle speed: typically up to 8,000 rpm Tool holder: SK40 Weight: approximately 6,000–6,500 kg

Condition: excellent (used), Year of construction: 2004, Working travels 2000 x 550 x 560 mm Spindle taper BT40 Spindle speeds -12'000 rpm Tool changer 32 Pos. FANUC 18i control Tool breakage control device Tool length measuring device Dedperrf Svefx Aizjcp Partition for pendulum operation Chip conveyor Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (min.): 16,000 rpm, spindle motor power: 5 W, number of spindles: 3, number of slots in tool magazine: 21, input voltage: 380 V, 4 units CNC Brother models S500X1/S700X1. Year of manufacture 2014 1 unit with 3 axes 1 unit with 4 axes with hydraulic station without vapor filtration system 1 unit with 4 axes Dcodpfx Aieyap R Dezep with hydraulic station with vapor filtration system

Condition: as good as new (ex-display), Taikan T-700B machining center, manufactured in 2026. Dedpfx Aiszzw Huozjcp

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, total width: 1,800 mm, table load: 160 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, product length (max.): 2,630 mm, number of axes: 3, This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking to get high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining centre we have for sale. Contact us for further details. • Table: 700 × 400 mm Dedpfxjyvip Tj Aizocp • Spindle: 12 HP (max 15 HP); cooling: air, through-spindle coolant (CTS), and external coolant • Rapid traverse (X/Y/Z): 48 / 60 / 72 m/min • Accuracy: positioning 0.012 mm; repeatability ±0.005 mm • Tool changer: 24 + 1 servo-controlled; max tool Ø 75 mm; max tool length 200 mm; max tool weight 4.5 kg • Change times: tool-to-tool 1.9 s; chip-to-chip 3.4 s • Control: AKIRA Mi:845 (compatible with FANUC G-code) • General data: coolant tank 150 L; power requirement 25 kVA; required air pressure 0.5 MPa • Application: suitable for light machining, especially non‑ferrous metals and composite materials Additional equipment • Twin pallet system (APC) Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot Dcedpfx Aiov T Rtiszep PGN 50 special gripper unit