Used coilers for sale (134)

Condition: used, carrying force: ca. 50 kg tape width: bis ca. 50 mm tape exterior-Ø: 750 mm Nedpsc Rf Slsfx Alhocu engine: 400 V, 390 Upm, 0,25 kW space needed: 850 x 600 x 1350 mm weight: ca. 100 kg

Year of construction: 1966, condition: used, machine/vehicle number: 0126, Load capacity (estimated): approx. 1.5 t Fork length: 1100 mm Adjustable fork width: 470 - 750 mm Ncodsbn Da Iopfx Alhju Maximum lifting height: 1000 mm Chassis: 2 running rollers on the support arms, 1 steering roller under the lifting frame Hydraulic drive: 380 V, 1.1 kW

Condition: used, Year of construction: 2008, material width 600 mm Njdpfxev Svbis Alhscu coil weight 2 x 1,5 t coil internal dia. 370 - 630 mm coil outside dia. 1560 mm speed 12 U/min Power capacity 1,1 kW Weight 1,5 t Dimensions (WxDxH) 2,5 x 1,2 x 1,9 m double decoiler, swivellable with motor, manual expansion, coil loop control

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t Ncjdpfx Aljvuungshju coil internal dia. 480 - 520 mm coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm

Condition: used, Year of construction: 2001, material width 410 mm coil weight 2,0 t coil internal diameter 380 - 520 mm coil external diameter 1400 mm power requirement 2,2 + 1,1 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm weight of the pulling device 1,15 t required space of the pulling device (WxDxH) 1,7 x 1,1 x 2,2 m Ncedpfjvut Thox Alhou Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll pulling device / hydraulic threading device 235 D with infinitely variable drive, coild loop control via ultrasonic material thickness up to approx. 6,0 mm roll diameter approx. 160 mm

Condition: ready for operation (used), Year of manufacture: 1988 / Overhauled in 2019 by HYDAC Accessoirs with a completely new control system Load capacity: 2,000 kg Table diameter: 1,500 mm Band width: max. 100 mm Band thickness: 0.3 – 1.0 mm Maximum coil height (incl. pallet): approx. 850 mm Number of pinch rollers: one pair Weight: approx. 2,200 kg Dimensions: approx. 2,600 x 2,100 x 1,700 mm Execution/features: Ncjdpfxey Hlgpo Alhsu • Sturdy welded frame construction • Coil hold-down plate • Large band deflection roller • Deflection roller and pinch rollers hydraulically height adjustable • Motor-driven pinch rollers with lateral band guide and roller cage • Deadman switch for safe band threading during setup operation at safe speed • Direction of operation (forward/reverse) selectable via hand switch • Continuously adjustable pulling force via potentiometer • Loop control system • Free-standing control cabinets with operator panels

Condition: used, functionality: fully functional, Year of construction: 2010, coil inner diameter: 280 mm, coil outer diameter: 850 mm, coil weight: 1,000 kg, coil width: 1,250 mm, Manual reel / strip uncoiler with transport rollers Note: Price refers to the sale of the depicted sheet metal Nodpfjy Dc N Njx Alhscu

Condition: new, Year of construction: 2025, machine/vehicle number: MOT01-300, coil inner diameter: 250 mm, coil outer diameter: 1,450 mm, coil weight: 1,000 kg, coil width: 300 mm, product width (max.): 300 mm, overall weight: 300 kg, load capacity: 1,000 kg, spreading range: 250 mm, Automatic coiler or decoiler Remote control console - wireless Automatic and manual working mode Speed fine tuning potentiometer Danfoss inverter Synchronized easily with punching line Ideal for stamping automatic lines Coiler motorized Central expansion Run both directions, forward and reverse Loop sensors control Speed from 0.1 RPM to 28 rpm Motor with gear reducers Ncsdpfjb H R Aysx Alhou Capacity max. load 1 ton Strip width up to 300 mm Inner diameter min 250 mm max. 520 mm Outer diameter max. 1450 mm Power 0.75 KW Dimension 1.200 mm x 1.200 mm height 1.600 mm Weight cca. 300 kg with CE certificate On stock also high speed presses Schaal, Mabu and Bruderer presses as well bas band saw blade welders

Condition: good (used), Maximum inner roll diameter: 1300 mm Minimum inner mandrel diameter: 700 mm Maximum roll width: 700 mm Ncjdsik E R Uepfx Alheu

Condition: good (used), Load capacity: 200 kg Material width: 300 mm Coil inner diameter: 240-580 mm Coil outer diameter: 1200 mm Nodpoh Rfhhsfx Alhscu

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Njdpfshx R Etjx Alhjcu Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Condition: used, Unwinding reel, reversing reel GSW SCHWABE Type LHD 50/800 Special Double unwinding reel Manufacturer's No. 5775, Year of manufacture approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Support discs Ø 850 mm Nedehubgwjpfx Alhocu Guide rings Ø 850 Center of reel shaft to reel base 980 mm - Reel can be manually rotated 180° with locking positions - Central spreading via rotary lever adjustment - Mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg Good condition

Condition: good (used), functionality: fully functional, Year of construction: 2002, coil weight: 5,000 kg, coil width: 1,500 mm, total length: 3,300 mm, total width: 1,500 mm, total height: 2,000 mm, power: 7.7 kW (10.47 HP), Decoiler, Coil size 1500 mm, max. load 5000 kg, inside dia. 430 - 530 mm, motor 7,7 KW, dimensions 330x150x200 cm, weight 2500 kg Ncsdpfx Aleyci Smehsu

Condition: used, functionality: fully functional, Year of construction: 2001, NOXON Schroeder + Bauer DPH 1400 Double Pallet Decoiler – Year 2001 Technical Specifications: Model: DPH 1400 Year of Manufacture: 2001 Serial Number: 167041 Tabe diameter: 1400 mm Max load: 3000 kg. Voltage: 400 V Frequency: 50 Hz Power Consumption: 0,75 kW Current: 14.2 A Weight: 1000 kg Strip pulling motor Loop control sensor Original documentation in English and schematics CE Certified Manufactured in Germany General Description: The DPH 1400 is designed for reliable coil unwinding from pallets, particularly suitable for large and heavy coils. With its robust construction and 1400 mm table diameter, it is perfect for demanding applications in metal forming, stamping lines, and automated feeding systems. Condition: Ncsdswpciyepfx Alheu Used, Fully functional Ready for immediate use German origin, well-maintained We can assist with international shipping and loading. On stock stamping equipment from renowned brands Bruderer, Mabu, Schaal, Bihler, Soprem and more.

Condition: good (used), Double reel, reel, unwind reel Ncsdpfoylil Eex Alhou -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Njdpfxeycnf So Alhocu Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Year of construction: 2010, condition: good (used), weight 3000 kg Nodpfx Aohhiawslhocu

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration. Nsdpfxeyt Eldo Alhocu

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Nodpfx Aoua Nngolhecu Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1988, loading capacity: max. 3.000 Kg. table diameter: 1.600 mm Nedpfx Aotzwxwjlhjcu strip metal width: max. 150 mm

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B Ncsdpfx Aloitdikjhju -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Nedpjwvv Rqjfx Alhjcu Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Njdpju A T Hzsfx Alhscu Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: used, Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm Nsdpfx Alsd Nttnshocu -Weight: 332 kg

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic Njdpfx Alsi Exp Eshjcu -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg