Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. Isdexby D Aspfx Abcetd High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Wall Thickness 4 mm Diameter Ø 600 mm Height 2098 mm Iodpfxoxa Ah Us Abcstd Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Iedpomt Dbhsfx Abcstd Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator Itjdpsmt Dcfjfx Abced After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: new, Year of construction: 2026, functionality: fully functional, 200 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK 200-litre pressure tank with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic installations. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as a stabilizing element for compressor operation parameters. Key Features of the 200 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 200 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of ½", 1", and 2" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Technical Specifications: Parameter Value Weight (kg) 80 Number of Connections 6 Connection Sizes ½", 1", 2" Dimensions 166.5 x 45 cm Tank Capacity (L) 200 Working Pressure (bar) 11 Wall Thickness (mm) 4 Diameter (mm) Ø 450 Height (mm) 1665 Itodpfexbzd Rox Abced

Condition: new, Year of construction: 2026, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Isdpfjmqlguex Abcetd Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 5.5 kW Voltage 400V/50Hz Efficiency 0-6 bar 690 L/min Efficiency at 6 bar 650 L/min Capacity at 8 bar 650 L/min Capacity at 10 bar 630 L/min Outlet port diameter (G) 1/2" Dimensions 810 x 610 x 850 mm Weight 120 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, THEOR 50 screw compressor equipped with an inverter from the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. Our company has been on the market for several years, we have extensive experience in the distribution of piston and screw compressors. As a European Manufacturer, we provide our clients with proven and recognized pneumatic solutions. Technical data Engine power 37 kW Voltage 400V/50Hz Air flow 5,6 m3/min Dimensions 1500 x 1000 x 1330 mm Weight 830 kg Most important advantages: INVERTER - The continuously variable compressor speed control system is the most economical control method. The most important advantage is lower energy consumption and maintaining a constant set pressure compared to conventional compressors hard, compact construction of screw compressor from the European producer specially designed cooling system ensures optimal working conditions even at high load of the device connection of the cooling system to the module through good quality hydraulic wires this technology allows significant energy saving special construction of air outlet for effective work efficient and solid pump installed in compressor unique filtration system with triple separation for effective work efficient motor with power 22 kW made in IP54 standard using a belt transmission, which ensures high effective efficiency lower noise of screw compressor thanks to apply specially designed soundproofed case (soundproofing plates) electronic controller from MAM series allow to set parameters: time between service inspections, power failure alarms, phase change, phase loss, overheating, other, work in Master / Slave mode, it is possible to connect up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and other The price is a net price. Price does not include shipping costs. Iedpfsm Nb Tpex Abcetd For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, THEOR 30 screw compressor equipped with an inverter from the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. Our company has been on the market for several years, we have extensive experience in the distribution of piston and screw compressors. As a European Manufacturer, we provide our clients with proven and recognized pneumatic solutions. Technical data Power 22 kW Power supply 400V/50Hz Theoretical air flow 3,2 m3/min Actual air flow 2,803-3,09 m3/min Dimensions 1380 x 850 x 1160 mm Weight 430 kg Most important advantages: Itedpfx Abjmt Dt Ieced INVERTER - The continuously variable compressor speed control system is the most economical control method. The most important advantage is lower energy consumption and maintaining a constant set pressure compared to conventional compressors hard, compact construction of screw compressor from the European producer specially designed cooling system ensures optimal working conditions even at high load of the device connection of the cooling system to the module through good quality hydraulic wires this technology allows significant energy saving special construction of air outlet for effective work efficient and solid pump installed in compressor unique filtration system with triple separation for effective work efficient motor with power 22 kW made in IP54 standard using a belt transmission, which ensures high effective efficiency lower noise of screw compressor thanks to apply specially designed soundproofed case (soundproofing plates) electronic controller from MAM series allow to set parameters: time between service inspections, power failure alarms, phase change, phase loss, overheating, other, work in Master / Slave mode, it is possible to connect up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and other The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR series, is the most modern solutions used in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee efficient and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European precision of workmanship. Solid construction, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Itsdpfxsklz Syo Abcjd Technical parameters Engine power 15 kW Voltage 400V/50Hz Efficiency 0-6 bar 2100 l/min Efficiency at 6 bar 2000 l/min Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Outlet 3/4" Dimensions 1080 x 750 x 1000 mm Weight 460 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, LUFT 1000 INVERTER Screw Compressor – Advanced Technology and Energy Efficiency in Pneumatics The LUFT 1000 INVERTER screw compressor combines cutting-edge pneumatic technology with high-quality materials and components. With low operating costs, ease of use, ergonomic and durable design, and high performance, this device guarantees efficient and trouble-free operation in demanding industrial environments. The LUFT 1000 INVERTER stands out with its direct-drive transmission, which offers significantly better efficiency and reduced power loss compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output and lower energy consumption. The maximum pressure generated by the compressor is 10 bar. Complete control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving the operator access to all critical system data and ensuring maximum flexibility and process control. Key Advantages of the 7.5 kW Induction Motor with Inverter Drive Significant Energy Savings The inverter enables smooth and precise regulation of the motor’s speed. The compressor adjusts its output to the current demand for compressed air, eliminating idle running, frequent start/stop cycles, and energy waste caused by venting excess air. Depending on your facility’s air usage profile, energy savings can range from 25% to even 50%. The more variable the air demand, the greater the potential savings. Itjdpfxemqlhvj Abcjd Stable Air Pressure With continuous speed regulation, the inverter maintains an almost perfectly stable pressure in the compressed air system, regardless of demand fluctuations. This is critical for the correct operation of pneumatic tools and machines, preventing pressure spikes and enhancing process accuracy. Reduced Starting Current and Electrical Load The inverter allows for soft-start motor operation, avoiding high inrush currents that can overload electrical networks and cause voltage drops. This protects the electrical infrastructure and reduces the risk of disturbances. Extended Component Lifespan Smooth operation without sudden starts or stops significantly reduces mechanical stress on the screw block, bearings, coupling, and motor. This translates into a longer service life for the compressor and lower maintenance and repair costs. Quieter Operation When operating at reduced speeds (during lower demand), the compressor generates less noise, improving the acoustic comfort in the workplace — a significant benefit for both operators and the surrounding environment. Greater Flexibility and Demand Matching The inverter-driven compressor can efficiently meet a wide range of compressed air requirements, making it an ideal solution for facilities with fluctuating air usage throughout the day, week, or month. Advanced Control and Diagnostics The inverter integrates with modern control panels to offer comprehensive monitoring, error diagnostics, remote control, and maintenance scheduling. This gives users full control and allows for optimization of the compressed air system’s performance. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Itedpfx Ajrh E Diebcod Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR REFRIGERATION AIR DRYER N10S 500L TANK Technical parameters LUFT 700 COMPACT Ijdpfxorh E Erj Abcotd Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1990, Industrial stationary piston air compressor in sound-insulated steel cabinet. Itedpfxsyl Nz Hj Abcsd Manufacturer: Reflex Model: ZU 57/3 – Typ 180 D Air receiver: 180 liters Made in Germany Complete unit including: Piston compressor Electric motor 180L air tank Pressure switch Noise reduction enclosure Condition: Used – Not tested. Sold as seen, ex works. Suitable for refurbishment or spare parts.

Condition: new, Year of construction: 2025, AHB-20A screw compressor special for laser machine double use 8 till 16 bar G3/4 connection 380 volt 3 phase 50Hz air delivery 1,2 m3/min Tank 500 l High Efficiency Refrigerated Air-dryer include High Efficiency Precision Filters include Air supply without oil and water two stge screw type INCLUDE IN THE PRICE: 1 airfilter ( have to change after 3000 hours ) 1 oil filters ( 1 change after 500 hour second after 3000 hours ) 1 separator ( change after 3000 hours ) Advantanges High Pressure Screw Air Compressor SPECIAL FOR LASER MACHINES Integrated Design Air compressor, air dryer, air tank and line filters integration. Avoid the trouble to connect the pipes, can use it after power on. Air Supply Without Oil and Water The compressed air contains oily water mist and oil, and high-pressure spraying on the protective mirror will seriously affect the transmission of the laser beam, disperse the focus, cause the product to be cut through, and produce waste. Ijdjm E Im Tepfx Abcetd Intelligent Monitoring ( option ) Smart housekeeper remote monitoring, 24-hour online monitoring, no need for special management to open the phone to quickly obtain machine operation information, When the machine encounters a malfunction or needs maintenance, the system will automatically send an early warning message. High Quality Spare Parts High-End Air End The double screws adopts the latest line design, high-precision processing, reduces the leakage of compressed air, reduces power consumption, and saves money for customers. Imported Electronic Accessories Imported electronic components, high protection and safety level, to ensure the stable operation of the equipment, and the electrical part is enlarged by 30-50%. High Efficiency Precision Filter Using high-precision and high-pressure-resistant filters, multiple filtrations to ensure that the gas supply is oil-free and water-tree, ensuring production. Large Capacity Air Tank Large capacity, more energy-saving and electricity-saving, thicker material, buffering, cooling, water removal, and stable air pressure. FOR MORE INFORMATION PLS TAKE CONTACT WITH US. J.C. Helthuis Coevorden Netherlands

Year of construction: 2007, condition: good (used), Volume flow 4,6 m3/min. Pressure output 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz connection thread 1 1/2 inch Itjdpfx Aboi D D Niecsd Operating hour : 8000h With compressed air dryer !!! Space requirement L x W x H 1850 x 1050 x 1760 mm weight 910 kg good condition

Year of construction: 1994, condition: good (used), Manufacturer: Boge Tip: V LEX 45 Engine: 45 kW Capacity: 6.5 m3 / min Iodpfxehtq Dvj Abcjtd

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: ATLAS COPCO Itsdpfx Ajylyz Djbced MODEL: GA30VSDFF S/N: API431056 YEAR: 2011 POWER (kW): 30 CAPACITY (m3/min): 5.58 PRESSURE (bar): 12.80 OPERATING HOURS (DOC/TOTAL): 33,313 FREQUENCY INVERTER: yes INTEGRATED DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO MODEL GA30FF S/N API325798 YEAR 2014 POWER (kW) 30 OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 FREQUENCY INVERTER no INTEGRATED DRYER yes, R134a 0.54kg Iodjylwlmjpfx Abcotd HEAT EXCHANGER no COOLING (AIR/WATER) air ON RECEIVER TANK no

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, overall weight: 3,436 kg, total length: 12,192 mm, total width: 2,438 mm, total height: 2,896 mm, motor manufacturer: Kaesar, volume flow: 1,538.4 m³/h, pressure (max.): 8.5 bar, type of cooling: air, input voltage: 400 V, compressed air connection: 6.5 bar, pressure: 8.5 bar, type of input current: three-phase, Equipment: compressor, Hello, we are selling our compressor container solution. As we no longer had space in the hall, we opted for a containerized solution. The compressor was intended for a clean room with positive pressure, hence the high flow rate. Two Kaeser screw compressors are installed to provide maximum redundancy. Original price €220,000. Unfortunately, the unit was never put into operation, it was only switched on once a month. I am happy to send you the technical documentation. Ijdpfjym Nrusx Abcetd

Condition: used, Year of construction: 2021, Technical details: feed pressure: 10 bar total power requirement: 7,5 kW volume capacity: 1,1 m³/min. Number of working hours: 0 h revolutions per minute of the motor:: 3000 U/min. voltage: 400 V / Hz rated capacity: 7,5 KW machine weight approx.: 438 kg dimensions L x W x H: 1,0 x 0,55 x 0,85 m SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated pressure tank - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D. Itsdpfx Abeu Nz D Uscjd *

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: CAI946254, overall weight: 466 kg, volume flow: 283.8 m³/h, pressure (max.): 13 bar, Equipment: type plate available, PROD. ALUP TYPE ALLEGRO26 CE S/N CAI946254 YEAR 2016 CAPACITY (kW) 26 OUTPUT (m3/min) 0.77-4.73 at 7 bar CIS (bar) 7-13 INVERTER yes BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) air ENGINE SIEMENS 1AU2166BAPL3, CLOSED CONNECTION 1" Iodpfxewn Dxye Abcotd NEW/USED used

Condition: good (used), Year of construction: 2012, MANUFACTURER: ATLASCOPCO MODEL: GA90FF S/N: API613191 YEAR: 2012 POWER (kW): 90 CAPACITY (m3/min): 16.21 PRESSURE (bar): 10 HOURS (DOC/TOTAL): 59581 FREQUENCY INVERTER: no BUILT-IN DRYER: yes Ijdpfx Aeyll Ddsbcotd HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: excellent (used), Year of construction: 2015, S014890 MANUFACTURER: ATLASCOPCO MODEL: GA15VSDFF PLUS S/N: API257970 Year: 2015 Power (kW): 15 Itodpfxsyli Nqs Abcod Output (m3/min): 2.51 Pressure (bar): 12.75 Operating hours (documented/total): 54,624 Frequency inverter: yes Built-in dryer: yes

Condition: excellent (used), Year of construction: 2008, operating hours: 1,12,351 h, functionality: fully functional, Kaeser ESD351 screw compressor, 200 kW with 8 bar and 36.80 m3/min. Air-cooled. Itodpfx Asyhb Iwobced

Condition: excellent (used), Year of construction: 2008, operating hours: 1,26,772 h, functionality: fully functional, Kaeser DSDX243SFC screw compressor, 132 kW with 8.5 bar and 26.90 m³/min. Integrated frequency converter. New compressor stage installed at around 45,000 operating hours. Iedpfx Aoyhakkjbcjtd