Condition: good (used), Year of construction: 2020, machine/vehicle number: ITJ400414, overall weight: 264 kg, volume flow: 96 m³/h, pressure (max.): 8.25 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA11FF SN: ITJ400414 YEAR: 2020 CAPACITY: (kW) 11 OUTPUT: (m3min) 1.6 CIS: (bar) 8.25 INVERTER: no Rodpfxov Dr Dwe Aazon BUILT-IN DRYER: yes EXCHANGER: no COOLED: (AIR) air ON THE TANK: no DOCUMENTS: no NEW/USED: USED

Condition: good (used), Year of construction: 1997, overall weight: 3,500 kg, volume flow: 1,158 m³/h, pressure (max.): 10 bar, Equipment: type plate available, Compressor: - ALUP TYPE: - SCG181-10 Rsdpercmw Eofx Aazen S/N: - 213615 Year of manufacture: - 1997 Power (kW): - 132 kW Capacity (m/min): - 19,3 Cis. (bar): - 10 bar

Condition: good (used), Year of construction: 2005, functionality: fully functional, 400 l tank, 3.8 kW, 10 bar, with condensate drain, was used as a backup compressor, in good condition. Price ex-location. Transport available at extra cost! Redpfxjybbfie Aazsn

Condition: good (used), Year of construction: 2013, functionality: fully functional, 610 l/min., 10 bar, 5.5 kW, 400 volts, weight approx. 250 kg, dimensions 1490 x 720 x 1220 mm Good condition Rsdpfx Aajybbczjzjn Price ex location Transport available at extra cost!

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Redpjychbasfx Aazen Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features That Distinguish These Models 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels compliant with IE4 or even IE5 standards Maintain high efficiency even at very low rotational speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in an “all-or-nothing” (load/unload) mode. If your system requires only 30% capacity, the compressor reduces its speed and consumes proportionally less energy. Elimination of idle running: Traditional compressors often continue running for several minutes after the tank is filled, consuming approx. 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this energy loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the electrical installation in the facility Allows frequent start/stop cycles without the risk of winding overheating 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the air network (with accuracy up to 0.1 bar), which is crucial for precision equipment such as laser cutting machines. Extended service life: The absence of sudden pressure and temperature spikes significantly extends the lifespan of the screw element. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Redpfxoycg Ufj Aazon Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1600 mm Weight: 350 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Rsdpfx Aaoycg Tnozsn Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1440 mm Weight: 290 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Rjdpfeycg Ryox Aazsn Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat Rjdpfxoycg I Sj Aazsn 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: good (used), Year of construction: 2022, operating hours: 9,800 h, RENNER RS 75 - 10 bar oil-injected screw compressor The compressor is in good condition with 9800 operating hours. Pressure: 10 bar Rated power: 75 kW Delivery rate: 10.35 m³/min Sound level: 76 dB(A) Air outlet: 2" Dimensions (L x W x H): 1754 x 1104 x 1697 mm Weight: 1367 kg Rjdoygmhmjpfx Aazsn Visit our store. We always have a large selection of new and used compressors in stock.

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1500 / LUFT 1500 COMPACT / THEOR 15-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced by normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants in the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Rjdpfx Asycf Nujazon Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with large surface area and precise micron rating. Optimal Price: We deliver high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter Set for Oil Change in CORMAK LUFT 400 Screw Compressors A complete set of filters is essential when changing oil in CORMAK LUFT 400 screw compressors. Regular replacement of these filters helps maintain compressor efficiency, prolongs the life of key components, and ensures clean, reliable compressed air. Oil Filter – Keeps Lubricating Oil Clean The oil filter is crucial for maintaining the cleanliness of the lubricating oil circulating through the system. It removes contaminants and metal particles generated by normal wear. Clean oil ensures proper lubrication and cooling of moving parts and extends the life of the oil separator. Purpose: Remove impurities from lubricating and cooling oil Benefits: Protects bearings and screw elements Reduces friction and overheating Extends oil service life Air Filter – First Line of Defense The air filter is the compressor’s first defense against dust and airborne particles. It effectively captures solid particles, dust, and contaminants from the environment before they enter the screw block. Using a clean air filter prevents wear of compressing elements and minimizes the risk of contaminating the oil and compressed air. Purpose: Protect the screw block and the rest of the system from external contaminants Benefits: Increases compressor lifespan Maintains performance Reduces energy consumption Oil Separator Filter – Ensures High-Quality Compressed Air The oil separator filter is a key component of oil-lubricated compressors, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the output air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieve high-quality compressed air by effectively separating oil mist Benefits: Lower operating costs (reduced oil consumption) No contamination of pneumatic installation Rodpeycf Iqsfx Aazjn Stable pressure maintenance Why Choose Our Filters? Full Compatibility: Filters are precisely matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Filter media with large surface area and precise micron rating. Competitive Price: High quality at a cost-effective price, providing an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1000 / LUFT 1000 COMPACT / THEOR 10-10 Oil filter is vital for maintaining the cleanliness of the lubricating oil circulating within the system. It removes impurities and metal particles generated through normal wear. Clean oil ensures proper lubrication and cooling of moving parts, as well as extends the service life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduction of friction and overheating, longer oil lifespan. Rodpfsycf Hmsx Aazsn Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from external contaminants. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial part of the oil compressor, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air by effectively separating oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic installation, maintenance of stable pressure. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 700 / LUFT 700 COMPACT / THEOR 7.5-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced during normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Rsdpfsycf D Sox Aazon Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants from the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, CORMAK LUFT 1000 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Rsdpfjycc Egex Aazjn Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 1000 VSD+PM screw compressor is the perfect solution. With a power output of 7.5 kW and an impressive actual air delivery of up to 990 l/min, it provides a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting equipment. This 400V-powered model is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable performance. The LUFT 1000 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution ensures stable operation and long service life by providing direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor data and enhancing flexibility and process control. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 l/min Air delivery at 6 bar: 990 l/min Air delivery at 8 bar: 950 l/min Air delivery at 10 bar: 950 l/min Outlet connection (G): 1/2" Dimensions: 900 × 600 × 840 mm Weight: 120 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. Redpoycctqofx Aazon The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Redpfx Ajxygbloazsn Speed: 745 rpm Volume flow: 3455 dm³/min Motor power: 22 kW

Condition: new, Year of construction: 2026, The LUFT 1500 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK combine state-of-the-art pneumatic solutions with the use of high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Technical parameters Rsdpfxeyb Dmis Aazsn Motor power: 11 kW / 15 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 1650 L/min Air delivery at 6 bar: 1580 L/min Air delivery at 8 bar: 1320 L/min Air delivery at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 × 740 × 1050 mm Weight: 380 kg

Condition: new, Year of construction: 2026, The LUFT 1000 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK represent the most advanced solutions used in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Technical parameters Motor power: 7.5 kW / 11 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection diameter (G): 1/2" Dimensions: 1470 × 620 × 900 mm Weight: 130 kg Rsdpfx Aasybz Spezjn

Condition: new, Year of construction: 2026, English translation: The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 690 L/min Air delivery at 6 bar: 690 L/min Redpsybvkasfx Aazen Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: excellent (used), Compressor Kaeser 30kw .Perfect condition . 3 pcs on stock Rjdpfsvr Urmjx Aazon

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Rodsh A Sfdjpfx Aazen Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer: Kaeser Model: SM 12 Year of manufacture: 2016 Power: 7.5 kW Operating pressure: 8 bar Rjdpfx Aaswx I Ruezjn Refrigeration dryer: Manufacturer: Kaeser Model: ABT 12 Year of manufacture: 2016 Refrigerant: R-134a Tank: Manufacturer: BWB Behälter-Werk Year of manufacture: 2016 Max. pressure: 11 bar Capacity: 270 liters After oil and filter inspection (replaced) Technical condition: perfect! PRICE REDUCTION FROM 4950 TO 3950 EUR!!!

Condition: excellent (used), Year of construction: 2019, MANUFACTURER: KAESER Rjdpfx Aasycv A Sszsn MODEL: DSDX245 S/N: 7260862 YEAR: 2019 POWER (kW): 132 CAPACITY (m3/min): 25.15 PRESSURE (bar): 8.5

Condition: excellent (used), Year of construction: 2017, operating hours: 61,116 h, functionality: fully functional, Atlas Copco GA200VSDFF screw compressor. 200 kW with 8.3 bar and 39.40 m³/min. Integrated dryer and frequency converter. Rsdpfx Aajx Ttg Dezen